# 1
Yakima WindShield Fairing for Roof Racks - 46" Long
I have a 10th gen Civic sedan and I was dying to get the perfect roof rack set for my car. At the time of my purchase there was not many visuals of what the rack system looked like on this car. I purchased the: •Yakima 50in Jetstream crossbars •Yakima baseline towers •bc182 & bc183 clips •Yakima 46in fairing Overall I love how it looks on my car! During This COVID pandemic I have been camping more, and this is the perfect foundation! First off, the 46in fairing is the perfect fit for the 10th gen civic! Wind noise is low also with the help of the aerodynamic crossbars. My main concern was the fuel efficiency. On long road trips I still average 38-40 mpg with the rack on. My daily commutes I average 34 mpg without Econ on.
This was the only fairing I could find to fit the OEM bars on my MK 6 Volkswagen Jetta. Installation was easy and the wind noises are gone
# 2
Inno Fairing for Roof Racks - 40" Long - Black
After researching various universal-fit fairings, reading reviews, checking all the specs on eTrailer, etc., I decided the Inno 40" (medium) Fairing was the best fit for my car. I have a 2009 Mazda 3 Sport, with a Rola roof rack mounted to factory holes. The rack arrived sooner than expected, and came partially assembled, (the feet were already attached). The remaining assembly was straight forward, and installation only took a couple of minutes. The fit is near perfect, as seen in the attached pictures. There is a noticable reduction in wind noise, though it's still there at highway speeds with the moon roof open, as to be expected. There's very little wind noise if the moon roof is just tilted. It's too early to comment on any changes to gas mileage, but I purchased this mostly as a visual mod so better gas mileage and reduced wind noise are bonuses. I would recommend this fairing to anyone looking for one, and would also recommmed eTrailer, as the entire purchase process was excellent!
Would've preferred stiffer packaging, but it was delivered undamaged. Clear instructions made it easy to install the hardware. Fit nicely on my Marone AirFlow 2 crossbars with about 1/8" gap between my raised roof rails on each end. The Inno fairing is high quality and would recommend it to anyone. Very satisfied with the purchase.
# 3
Replacement Rubber Strip for Thule Aero Load Bars 53"
I replaced this strip and one of the end caps and the horrid whistling is now GONE. Very pleased.
A+ product and lightning fast shipping! I have knock off load bars that are actually a descent alternative to BMW's $240 version, but my rubber strips were shot. The upper T-slot on the bars are 7/16 which I found confirmation from the Q/A that confirmed these would fit! Good stuff and I highly recommended etrailer.com!
# 4
Thule Xadapt8 AeroBlade and Xsporter Load Bar Adapter for Criterium Bike Rack
This part allowed me to adapt my previous Thule accessories to work on VW Branded Roof Bars.
These thule adapters work amazing and allowed me to attached my Criterium bike carrier to my Rhino Rack aero bars. I was afraid i would have to return the bike carriers but these adapters saved me and were very low cost. Totally worth it.
# 5
Yakima Same Key System (SKS) Lock Cores (QTY 4)
These lock cores worked perfectly for my Yakima kayak rack. I can use the same key for all the locks and I feel much more secure knowing that someone can't steal my expensive rooftop car rack. So, 5 stars!
Simple instructions, easy install, much more service than lockless. I only wish you can request a specific key code like you can on the single cylinders. It would be nice to have my Toploader keyed to the same lock.
# 6
Replacement Handle Assembly for Thule Crossroad Roof Mounted Railing Feet
Ordering some parts from eTrailer was very easy and everything I ordered showed up and is exactly as expected. Thanks so much!!
It was just a replacement part but as usual Thule products are great. You take care of them and they take care of you.
# 7
Thule One-Key System Lock Cylinders - Qty 4
The Thule One-Key System Lock w/4 cylinders actually is used with a fifth cylinder, as I added an extra one to replace the stock lock that came on my Pulse 615 Rooftop Carrier. The attached photo shows most of the manuals for all the various components I used to assemble a total system for the roof of my Jeep Grand Cherokee in conjunction with my DropRack XL. It took several calls to the great representatives at etrailer to get all the correct part numbers, as my project is very unique. Every call, they took the time to research their database to help me achieve my end goal. The other photo shows the finished product on my rooftop, minus the Pulse cargo box which I removed for driving at my wintertime destination. This project enabled me to make a cross-country trip over this Winter with my RV in tow, and also serves as a great wind diversion around the front of the RV while underway.
Lost keys to Thule ski rack & ordered these as replacements. Switching out old locks was very easy as shown in the Thule video. Now I can use the extra locks to replace the locks on my Thule bike rack so I only need one set of keys for all my Thule locks.
# 8
Replacement Cover for Thule Aero Roof Rack Foot Pack
Exactly as described, super fast shipping. Thanks!
Replacement parts worked great for my daughters thule roof rack. She used it all winter for snowboarding.
# 9
Thule XADAPT2 AeroBlade and Xsporter Load Bar Adapter for Roof-Mounted Carriers
Great adapters to fit my rhino rack vortex aero crossbars
I used the XADAPT2 kit to convert my Thule Bigmouth bike carriers to fit the OEM Volkswagen cross bars on my 2016 Jetta sedan. The bike carriers originally had clamps to fit the Thule square cross bars, and this kit allowed me to convert the carriers to fit in the T-slots of the VW cross bars. The kit was originally designed for older VWs, but the T-slot dimensions have not changed for the modern VW cross bars. I would venture to guess that the kit should work for the OEM cross bars of any modern VW rather than just the Jetta, since the VW bike carriers are not model specific. A great quality kit, and perfect for my application!
# 10
Inno Fairing for Roof Racks - 48" Long - Black
This seems like a good product, but the instructions were poor, written in garbled English that was probably a poor translation from their original language. It was a disappointment to learn that we cannot use the sunroof with this product, as two of the feet rest on it or its gasket.
Great product, and looks great.
# 11
Replacement Square Head Bolt for Thule Fairings
Great product and exactly what I was looking for. Used this product to mount my Thule 593 Wheel On to my Yakima Whispbar on my 2013 Volkswagen Jetta GLI. Very simple setup and probably took about a total of ten minutes. I used this product along with the low profile wing nut that is already supplied with the Thule 593 Wheel On to maintain a clean look with no bolts or adapters visible. This setup will help with those looking for sun roof / moon roof clearance with low profile bars such as Whispbars and Aerobars!
I have the Yakima Jetstream crossbars and just needed some M6 t-slot bolts, but did not want to buy the $20 Yakima Item # Y03098 with the extra plastic brackets. These Thule bolts fit the T-slot in the Yakima Jetstream bars perfectly.
# 12
RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4
Straightforward installation to adapt the new SkyLine towers to the standard Yakima round bars.
Kimberly has shown that great customer service is not dead! etrailer and Kimberly are great to work with and have earned my business and will always be the 1st and last place I look for my rack+ needs! As for the application, I needed more space to fit my cargo box on top of my 4Runner TRD Pro’s rack. I came up this this… Thank you!
# 13
Large Crossbar Adapter Bolts for Inno Fairings - Qty 6
Love how the Inno wind reflector looks on my car. The extra long screws were essential for VW OEM racks, I recommend to have the option for proper screws at the time of original order. Would have saved a lot of time and extra expense.
Perfect fit for Inno Fairings
# 14
Replacement Endcap for Thule Roof Rack Square Load Bars
Super quick delivery time for a part we needed. Speedline Automotive Sales LLC highly recommends etrailer for having outstanding customer service! Thank you
Good product. Great communication. Fast shipping A+++
# 15
Replacement Lockable Handle Assembly for Thule Aero and Rapid Aero Roof Rack Foot Packs
Haven't installed it yet, but it's exactly what I wanted and just in time. Thanks!
Great product! Exactly what I needed... I was given a roof rack setup with the handle so this helped to mount them to my jetta.
Test Fit: Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs on a 2017 Volkswagen Golf
Speaker 1: Today on my 2017 Volkswagen Golf, we're going to be test fitting the Rhino-Rack Vortex Aero roof rack system. This is going to consist of part number RRVA137B-2, those are the bars here. These also come in silver as part number RRVA126S-2. We'll also be using part number RRRLKDA, these are the 2500 series legs for the Vortex Aero crossbars. And finally, part number DK390, and this is the fit kit that clamps around your existing door frame.This is a great roof rack system that will help you carry wide variety of accessories on your roof while freeing up space inside your Golf. Such as bike racks, cargo baskets, or smaller cargo boxes.
Test Fit: Yakima RidgeLine Roof Rack for Flush Rails on a 2016 Volkswagen Golf
Today on our 2016 Volkswagen Golf GTI, we're going to be test-fitting the Yakima Roof Rack. It's going to include the jet stream, 50" crossbars, part #Y00425. The baseline towers, part #Y00146 The baseline clips for the front, part #Y06123. The clips for the rear, part #Y06125. To start our installation, we're going to take the end cap off of our bar. We already removed this rubber strip, the filler strip, on the bottom side. We're going to take our tower, we're going to slide in to the bottom of our rail, we're going to slide it in.
Setting up the Yakima RidgeLine Roof Rack for Flush Rails on a 2015 Volkswagen Golf
Today on our 2015 Volkswagen GTI, we will be doing a test fit of the Yakima Q Tower roof rack system. For your round bar here, it's going to be part number Y00408. You also have your Q Towers, which is going to be part number Y00124, as well as two sets of foot packs. You will have your Y00664s, which in this case, is going to be for our back bar, and on the vehicle right now, we have our Y00663. Which, the only difference is that your bars are going to be a little bit shorter on the front than they are on the back for the Q clips here. We'll go ahead and go through how to get everything assembled. We will be using a few different tools, as well.
Thule Traverse Roof Rack Installation - 2010 Volkswagen Golf
Today on our 2010 Volkswagen Golf we'll be test fitting the Thule Traverse Roof Rack System, part numbers THLB50, TH480, and THKIT1321. We'll begin our test fit by first opening up the front doors of the vehicle. We'll then use an allen wrench to loosen up and remove the black plastic covers which will allow the barbs and the clips to go up into. With this done, we'll place the front load bar onto the front of our roof. We'll then take some cleaner to clean off the roof where our protective padding is going to be. Now since there's already a hole where the clip is going to be into, you can use that as the halfway point to place your clear protective pad down. We'll then peel off our clear protective padding and carefully place it onto the roof, being careful as the underside of the protector is extremely sticky. We'll repeat these steps for both sides. With this done, we can place the front load bar onto the front of our roof.
What our customers are saying:
"I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future."