Best Toyota Tundra Tonneau Covers

Installing the Leer Tri Fold Hard Tonneau Cover on a 2024 Toyota Tundra

Hi everyone, Bruce here at etrailer. Today we're gonna take a look at and install the LEER Hard Tonneau cover on our 2024 Toyota Tundra. If you are looking to keep your gear a little more secure, and keep it nice and dry, I highly recommend the LEER Hard Tonneau cover. It looks pretty sharp on the Toyota, it doesn't raise off the rails very high, and it's just a nice looking clean look. One of the great features I do like about this Tonneau cover is you don't have to unlatch both sides to unlock it and fold it up. All I need to do is go up underneath, pull the tabs, and it'll unlock both sides.

Setting Up Your etrailer Hard Tonneau Cover - 2022 Toyota Tundra

How's it going, neighbors This is Ed here with etrailer.com and we're taking a look at the etrailer Quad Folding Tonneau Cover on our 2022 Toyota Tundra. Now in general, when you're adding the tonneau cover to the back of your vehicle, it's for an extra measure of security. And there are some studies out there to say that you can get additional fuel economy. However, you do pick up better aerodynamics by not having that void in the back of your vehicle. So let's take a closer look at the etrailer cover and see what's special about it. The etrailer cover is actually four panels of UV resistant materials.

Setting Up Your etrailer Soft Tonneau Cover - 2022 Toyota Tundra

How's it going, neighbors This is Ed here with etrailer.com, and we're taking a look at the etrailer Soft Roll-Up Tonneau Cover on our 2022 Toyota Tundra. Now, this is gonna give you an easy way to get increased fuel economy and aerodynamics, also a measure of security for the things inside of your bed. So let's take a closer look and see what makes the etrailer cover special. Adding a tonneau cover to the bed of your Tundra is gonna allow you to get a more aerodynamic ride. There are some studies that go both ways that say you can get better fuel economy, but it's something I've heard for a long time here at etrailer.com. In general, it's gonna also give you a little bit more security for what's going on inside your bed.

Installation Guide for the Bestop EZ Fold Folding Tonneau Cover on a 2020 Toyota Tundra

Hey everybody, how's the going Today, we're gonna be going over and show you how to install the best top easy fold tunnel cover here on a 2020 Toyota Tundra. So, this is what our cover looks like, installed on the truck here. And if you ask me, it's a pretty good looking cover. It does stick up above the bed about an inch or so. So, it isn't a low profile culvert option, but this is actually one of the more cost effective options on the market. So, things such as the flash design just simply don't have.

Installation Guide for the Leer Hard Tonneau Cover on a 2020 Toyota Tundra

Hi, everyone. It's Evangeline from etrailer. And today we are looking at our LEER HF350M hard tonneau cover here on our 2020 Toyota Tundra. Now this is a great tonneau cover if you are looking for a nice, strong, sturdy, reliable tonneau cover, that is also very user-friendly and very easy to install and uninstall. It's a tool free install. So, let's take a look at some of its features.

DIY 2019 Toyota Tundra Installation for the TruXedo Lo Pro Soft Roll-up Tonneau Cover

Adam: Hi everyone, Adam with etrailer.com. Today, we're going to be taking a look at TruXedo's Lo Pro roll-up tonneau cover, on our 2019 Toyota Tundra. So some of our customers have been telling us how much they like this tonneau cover for a couple of different reasons. First, it's really, really easy to install. It really took me in barely 15 to 20 minutes to put it on. It is really, really low profile.

Install: BAKFlip MX4 Hard Tonneau Cover on a 2018 Toyota Tundra

Speaker 1: Today on this 2018 Toyota Tundra, we'll be having a look at and showing you how to install the BAKFlip MX4 hard tonneau cover, part number BAK48409.Here's what our tonneau cover looks like installed. Now the main reason you're going to want a tonneau cover like this one, is that it'll help protect the contents of your truck bed from the elements. And when you combine it with a locking tailgate such as this one, you can help protect it from theft and tampering as well.This cover has a nice sleek profile that matches the bed of our truck. The tonneau cover has a nice lightweight, but yet still sturdy aluminum construction. And also has a nice matte black powder coat finish. Now unlike soft tonneau covers this one with its half inch thick aluminum panels, is rated to support up to 400 pounds of evenly distributed weight.

Installation Guide for the RetraxPRO XR Hard Tonneau Cover on a 2016 Toyota Tundra

Hi everyone. Aiden here with Etrailer. Today we're gonna be taking a look at and later be showing you how to install this RetraxPRO XR hard tonneau cover on our 2016 Toyota Tundra. Now, when it comes to hard tonneau covers, you've got a couple of different styles. You've got the roll up and the trifold that'll sit on top of the bed rails, but this one is going to be a canister style and really all that means is it'll roll up to a canister at the front of your bed, meaning that nothing blocks the back window of your tundra. Now, personally, I'm a fan of this style.

Mount: BAKFlip G2 Hard Tonneau Cover on a 2014 Toyota Tundra

Today on our 2014 Toyota Tundra, we'll be taking a look at and installing the Bakflip G2 Hard Tonneau Cover, part number BAK26410T. The Bakflip G2 is the right solution for covering your cargo in the back of your pickup. This aero-dynamic, low profile cover is an easy, no drill installation. It simply uses clamps and secures up underneath our raised truck bed side rails. The four panels have an insulated core to add strength, and have a black paint UV-resistant finish, so it's going to stand up to the elements. It features matte black rubber seals around the surrounding edge to help keep out water.

Extang BlackMax Soft Tonneau Cover Review - 2014 Toyota Tundra

Today on our 2014 Toyota Tundra, with a 5 and a half foot bed, we're going to be installing the Extang blackmax soft tonneau cover, part number Ex2460. One really neat feature about this tonneau cover, the one that kind of sets it apart from others, is that by being a full snap cover, meaning it snaps all the way around, it allows you to gain access to the front corner of your bed here, without removing the whole cover. You'd simply pull a couple snaps off here and you can reach in and grab something, saving you a lot of time as well as effort putting the cover back on. Now, one of the nice features about this cover is that because it does snap across the front rail here near the cab, you can completely remove the cover without removing the base rails or the 2 side rails in the front rail, giving you complete access to the bed of your truck. Now, another nice feature of this tonneau cover is the clamps themselves have dual slots built into them, allowing you to adjust how high the bow is to go through the center of the tonneau cover are set. You can set them at a higher setting, which will give you better fuel economy as well as help with water runoff, or you can set it at the lower setting, which will give you a more sporty aerodynamic look. Now, you'll see how easy it is to install our clamps that secure the rails of the tonneau cover to the bed of your vehicle. Three simple pieces, a top, a bottom and a screw that hold it together.

BAKFlip FiberMax Hard Tonneau Cover Installation - 2008 Toyota Tundra

All right, today on this 2008 Toyota Tundra were going to install part number BAK126410. This is a back flip, fiber max hard tonneau cover. All right, to start off our install well go ahead and take the rails and well go ahead and install them to the side of the truck. These will install on the inside edge of the bed. Well go ahead and put it in place and we need to push this forward as possible. Now to help hold it for us well go ahead and use a couple of extra clamps just to hold it up, then well go ahead and take the clamps that come with the kit.

How to Install the Bestop EZ Fold Folding Tonneau Cover on a 2007 Toyota Tundra

Today on this 2007 Toyota Tundra were going to install part number B1618101 from Best Stop. Were going to start off our Tonneau cover all folded up as it came out of the packaging. Well go head and sit it on the rails of the bed and well pull off the protective coating on the pads underneath. Well go ahead and take it and square it up on the bed. Make sure its square in the corners and then well go ahead and unfold the Tonneau cover all the way in the back. Then well start at the back end and make sure its even front to rear.

Setting up the TruXedo TruXport Soft, Roll-Up Tonneau Cover on a 2007 Toyota Tundra

Today we are going to install part number 245701 from TruXedo. It is their TruXport Tonneau Cover. We are going to install this on a 2007 Toyota Tundra Pick Up Truck. We are going to show you the components of the tonneau cover here. First off we have the actual tonneau cover itself, with the front rail already installed and also the back rail is installed on the back part of the tonneau cover in the inside. It is rolled up now, you can not see it. Next are the clamps that hold the tonneau cover in place. It comes with six clamps and all you need is a 1/2in socket or ratchet wrench to tighten them down. There is only one tool to install all of this. Then you have the two rails, of course the left and right side. And then the foam packing which you see in the middle there that is part of the weather seal that goes underneath the corners of the tonneau cover.

Installation: RetraxPRO MX Hard Tonneau Cover on a 2005 Toyota Tundra

Today on our 2005 Toyota Tundra, we're going to be taking a look at Retract Pro retractable MX hard tonneau cover, Part Number RT80822. This tonneau cover is really good if you're looking to keep things in the bed of your truck secure. Things like luggage or sporting goods, but also maybe you've got a fifth wheel hitch that you'd like to keep secure in the bed and you don't want it to be visible by everyone. This is going to do a really good job of covering those things up and keeping them safe. It's also very good because it's easy to operate and it doesn't take a lot of effort. You can use just one hand and lock it into whatever position you need to have it locked in. As you can see, it keeps a very nice flush clean look.