Best Toyota Tacoma Gooseneck Hitches

I received it just as I pulled the fifth wheel hitch off. UPS put it on my tall gate I opened it up and installed it in less than 2 minutes. Prefect fit tight no slop. I give this company a 5 AAAAA +++++ rating. Fast shipping. Thanks Bill at etrailer Happy Trails

I have been through a lot in my life time but after talking with Kelly an I placed the order I could not be more pleased with the hitch! It was a perfect fit and can’t thank you enough!!!

I purchased this to pull a 25Ton GN trailer with heavy equipment and so far it works great! Good price point and reliable product. I would highly recommend this product and trailer. Thank you!

One year later and it’s probably the best thing I could have added to my truck. Haven’t stopped hauling since I installed the turnover hitch

The hitch is beefy and seem to be very strong. My guess is the truck frame will give before the hitch. Great quality. I very happy! I'm an above average backyard mechanic and found the installation doable, but a little of a challenge. Differently need a help. My wife was a big help. I use a 2X4 across my bed and a ratchet strap to lift and hold the center section in to position. I also had to reposition my exhaust pipe where it goes over the differential to get some clearance. Also, I had to drill out one of the square holes in the tailpipe L bracket to receive the factory bolt.

Seems to be as described. I haven’t yet used it to tow anything, but the instructions were accurate. Installed on my 2003 f-350. It did take quite a bit longer than I thought. Started around 1pm and got wrapped up around 6. At first it didn’t look like things were lining up right, but everything moved into place as I snugged bolts down and torqued as the sequence in the instructions say. I love how it sits flush and is so user friendly once installed. I have used the same type of hitch on a truck at the fire station, so I’m familiar with how they work and they have always been great for me and others. I just dropped a star for how long the install took compared to their estimate. I’m not new to turning wrenches either, but it didn’t look like things were lining up at first.

I love my hitch . I love how I can turn it over and I can still have use of the full truck bed. I could of bought a cheaper hitch but the quality is by far better than other hitches I have owned in the past. Customer service was great after they helped me fix my ordering mistake. Very happy with my hitch.

I was very satisfied from ordering to instillation. Great people and very concerned about your satisfaction. Instructions were complete and easy to follow. Saved approximately 50% in cost. Thanks etrailer

The local Ford dealer wants $375 for a gooseneck hitch kit that's nowhere near as nice as the B&W one. This is my fourth B&W product and this latest hitch kit doesn't disappoint. I have 2", 2-1/2" and 3" Tow & Stow hitches from B&W, and this is typical made in the USA B&W quality, and the hard case is a nice touch.

The ordering process was easy and the shipment came quicker than expected. Both products (B&W Ball/Safety Chain kit & set of chains) look to be as advertised so I'm happy with the overall purchase. These will be used to tow a 15k fifth wheel RV.

The ball did not last long. The trigger for allowing the ball to release takes away from the surface area of the ball. This lead to early wear and premature failure. I have to replace it with a B&W machined ball which is a harder steal and solid surface.

Used the Kurt gooseneck kit,worked great.Easy to install and great caae to put it back in when not in use.

The kit arrived in two days. The quality is very good. All the parts fit as described. We were able to install it in a few hours without a lift. We plan on pulling a 14,000 # trailer to move farm equipment. This trailer will replace an old 12,000# pintle hitch trailer. I would definitely recommend this kit to others.

I like the hitch but when ai am pulling my trailers, and I am moving them around at low speeds it seems that there is a good amount of movement in the hitch and the feel in the truck. I’m not sure what that is but I have used trucks that didn’t have that feel in them but mine definitely does. We followed all directions and torqued all bolts to the required amount. Maybe someone can shed some light on what that maybe. Thanks

This was an easy one. No nonsense ordering with fast and free shipping. This comes in box for storage when not in use. Perfect fit for my 2024 Ram 3500 with factory spray on bedliner. The best thing is, no more grease on my hands or gloves. Looks and feels solid with a 30,000lbs rating.

The ball works ok, but after a few months it began to get small burrs on the side. This made it too tight in the hole and would not come out. I asked etrailer for help and they said it was my fault for not checking it every couple of weeks and that it was stuck in the truck bed for good. After a bit of research I found that jacking the ball out of the bed from under the truck worked. I had to file off all the burrs before it would go back in the hole. A few months later and it happened again.

Hardest part was removing the fifth wheel hitch from the cross bracket due to it being so heavy. The gooseneck adapter was a breeze to install and works flawlessly.

Hitch works great. I have a plastic bedliner, and the plate would lay on top of the bedliner. I was unable to secure the plate to the fifth wheel rails, so I cut out the section of bedliner causing the problem, and the gooseneck plated mounted up just fine.

B&W hitch arrived and installing was a breeze. The ONLY problem I encountered was the lock washers included seemed inferior and better than half of them spread apart and I replaced them with known good. All in all good quality and etrailer was very good to deal with. I'll still give my whole experience 5 stars....maybe they just got a bad batch of lock washers.

Easy to install with minimal modifications to the truck. This hitch has held up well towing a 44 ft trailer loaded to the max. Great product.

I have used these three times now pulling a 14k fifth wheel. They work great. Easy to install and no huge hitch tying up my truck bed. The last hookup I had one of my safety chains hooked to short. Made a fairly sharp turn and heard a loud pop. I had it looped through the chain holder and back up to the camper. It straightened the hook on the chain but didn’t phase the Curt chain bracket in the truck. These things are tough.

etrailer was great! I received Gooseneck hitch in a damaged carrying case (used to store the hitch hardware). etrailer immediately sent a new carrying case. etrailer has GEAT customer service. Thank you!

Great hitch. Used it several times to haul my cattle trailer no issues. Very easy to install with minimal tools. Everything fit well. I have a rubber bed mat and the rubber hitch cover is almost the exact same thickness making the bed %100 usable when the hitch is in storage. It also does a great job of keeping dirt out of the hitch.

Unit installed and pulled my fifth wheel to provincetowne Mass. Unhooked and pulled the ball out and picked up some firewood. Nice flat surface. Love it. Only way to go.

My hats off to etrailer for their fast shipping. Placed order on Dec. 17 mid morning and had the order on Dec. 19. I installed this on a 2019 Ford F350 SRW. The installation was fairly easy once the bed is removed. Reese says in the direction you will need an EP 24 plus sockets to remove the bed bolts but I had to use an EP 26 socket. Also the one thing I found miss leading is how etrailer states to get the max capacity out of the hitch is you need the inner frame brackets welded to the frame which is true but you also need another bracket kit 308862 which I did not realize until I look at the installation directions. I would suggest ordering a set of bed bolts and retainer nuts before you start just in case plus they say you are not suppose to reuse them. My 8' bed had 6 - 114mm and 2 - 130mm. The 2 longer bolts were near the tailgate and have different size retainer nut

Outstanding Service and Quality Products I recently purchased RV trailer towing equipment, and I couldn't be happier with my experience. Their website is user-friendly, and the product selection is impressive. I ordered a Reese under-bed gooseneck hitch, it arrived promptly and exactly as described. The installation instructions were clear and easy to follow. I highly recommend E-Trailer to anyone in need of reliable RV towing equipment.

Ok first off. The paint adhesion of any b&w product is probably the worst I've seen for the money. The paint is the first thing that falls off. That being said if you know that already and take some precautions like I did then you can really easily fix this problem. I sandblasted the back half of my frame and did the 3 step por-15 method on everything. I currently live in Indiana and I do seldomly drive it in the winter but I hate rust and will be moving more south shortly. I por-ed every part that came with the hitch. Every bolt and nut got anti-seize. The bolts are also of basic quality and will rust fast. Anything that was metal on metal contact has a layer of marine grease to prevent the from from rusting in between. I'm extra but I felt that this was the only way to go to protect everything. It's still a great product and hasn't let me down yet.

This fit nicely on my 2004 Silverado 3500. Installation was very straight forward. I have not had a chance to use the hitch yet, but I don't see any reason that it won't work out excellent. Thanks

This was not to difficult to install. The most nerve racking part was cutting a hole in the bed of my truck. So far the finish is holding up to the weather and none of the bolts have come loose. Now, I just need to get a Gen Y or Reese Goosebox for my 5th wheel to eliminate the giant hitch in the back of my truck!

About a year ago i purchased this and i honestly have not put it to use. However, i did get an email from the company asking me about my experience and it was just a nice thing to see. So, my experience installing it went very well. Online directions from the company made it a breeze without any questions. I think the whole process took 2 hour with my dads help. The hardest part for me was cutting the heat sheild off the exhaust because i didnt have the right tools.

I just installed the Spyder Gooseneck Hitch. First the Hitch weights 77 lbs. The Hitch fit in very tight. The Curt Spyder Gooseneck showed up ony a couple days....I am very pleased with the Spyder. I haven't been able to tow with it yet but I believe it will do great!

Super fast delivery,very nice people I dealed with, very easily installed

etrailer did great with the shipping, and the quality of fabrication of the hitch is great, however the coating is no good. B&W should start having their parts galvanized. Powder coating does not hold up to this application. Especially when you coat smooth bare steel surfaces. I installed my last B&W hitch and same situation good fabrication poor coating. 10 years later it is the only rusty part of my frame. Other than that great product.

Did the install myself following your video. The turn over ball works great and easy to flip even in frigid temps after being exposed to elements.

Excellent product. Good fit. Clear directions. Straightforward install. I would absolutely recommend this product. It's great to be able to ditch the ball when you need to haul stuff in the bed. Free install tip: I used the hitch itself as a template for drilling the bed and frame rails. Saves some layout and measuring.

etrailer and it's employes were very knowledgeable and helpful helping me order and keep track of my order anytime I need to, definitely recommend them.

Just received my gooseneck plate today. Shipment was on time, and complete. It is extremely cold in michigan today, but went ahead and dropped it in my already mounted rails. It fit real nice. I'll put it to work next week.

It went right in like it belonged there. My husband & I installed the hitch in 10 minutes...no tools except for a hammer to "convince" it into place. I installed this in a 2001 F-250. Planning a test run later today...I will update if I discover any major flaws. But I do not expect any trouble. Great service and my compliments to "George J"!!!!

I’ve had this for over a year now installed on my custom fabricated welding bed and it has been perfect. Put together well and definitely worked perfect for what i needed it for. I use it to haul my 43’ 5th wheel camper and haven’t had a single issue. Would definitely recommend and use this kit again.

WE HAVE NOT COMPLETED INSTALTION BUT SERVICE FROM JOANNE IS 2ND TO NONE THANK YOU WE LOOK FORWARD TO MORE TRANSACTONS