# 1
Swagman XTC2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
I was sent additional mounting materials that don't correspond with my hitch or my bike rack. See the photo below. Are these materials for my Swagman STC2 Bike Rack Item #S64670?
Very stable and simple to use bike rack that works great with my road bike AND with my 29" Big Rippers. It makes loading and unloading the bikes a snap and they are safe and secure for traveling once loaded and secured. I have already logged over a thousand miles hauling bicycles with this rack and highly recommend it. I am a big fan of Yakima roof racks but, honestly, wish I would have went with this setup for my bikes from the beginning.
# 2
Thule Passage Trunk Bike Rack for 2 Bikes - Hanging Style
Pontiac Trans Sport VanThe Thule Passage Trunk Bike Rake for 2 bikes is a good product. I used it to transport my mountain e-bike. I choose this particular unit because it can handle the weight 2 of bikes (non-e-bikes) and the weight of my e-bike is equivalent to weight of 2 bikes. Note: Must readjust the straps after mounting the bike to the rake.
great! works really well, and a lot easier to attach than I anticipated. We drove with bikes across the country from south west all the way to North east. solid rack!
# 3
Swagman XC2 Bike Rack for 2 bikes - 1-1/4" and 2" Hitches - Frame Mount
This is a well designed rack. Adding and removing bikes is quick & easy. Just set the bike on & slide the padded hook down onto the bike frame to secure it; no straps required. If only one bike is transported, it does not interfere with opening the trunk on our Tesla Model 3. With 2 bicycles the trunk cannot be opened. For 2 bikes the Swagman model that can tilt might be worth the extra 22 bucks. This rack uses a bolt in the receiver hitch instead of a pin. This locks it securely preventing it from moving in the hitch & rattling. It also requires a wrench to remove it, good for theft prevention but one more thing to keep track of. For storage on the vehicle the top bar folds down. For storage in the garage, the left & right bars fold up & you can hang it using one of the hooks.
So far so good. The rack wiggles a bit, but that is expected. I have it on my 2007 Corolla and I have hit 65+ on the highway with it and have not had a problem. I would recommend getting a locking pin. The one included is threaded, which aside from security, makes it harder to take the rack on and off. I would also look into a DIY way to secure the wheels better. I am using some bungee straps which do the job no problem. The two bikes I carry are at the racks capacity.
# 4
Thule Passage 3 Bike Carrier - Trunk Mount
Way too light duty for what is advertised. It seemed to be made out of 1/2 inch electrical conduit. I would never put three bikes on that rack. I only had two bikes on the rack. While on trip through Idaho the wind was so strong that one of the bikes partially blew off the rack. We traveled 1,800 miles and upon arriving home I actually sawed the bike rack up and threw it away so that no one else would use it and cause an accident. I've already found a different brand that is HEAVY DUTY and I will stick with that brand.
This is definitely more of a 2 bike carrier vs 3 bikes. I had to take the front wheels off two bikes to get three bikes on this carrier. Also, it rubbed the paint off on the trunk of my Subaru legacy.
# 5
Kuat Beta Bike Rack for 2 Bikes - 1-1/4" Hitches - Tilting
The quality of the bike rack was excellent, but I was unable to use it because I couldn't open and close my trunk (Honda Accord 2012) when the bike rack was closed. It may have worked if I had a different trailer hitch, but I didn't want to spend the extra money on a new trailer hitch. Unfortunately, I will need to return the bike rack.
I was looking for a light weight bike rack for my 2015 Honda Accord. Your videos stated that the Kuat Beta was light and easy to install. You were right. I opened the box, read the instructions, and had it installed in about 10 minutes. I don't use a rack lock. It is so easy to pop on and off the hitch that I keep the rack in my car trunk.
# 6
Saris Bones 2 Bike Rack - Trunk Mount - Adjustable Arms
So far really great! I love the stability my bike has on the rack, fit for my 2021 Honda Civic, and the quality of the material engineered into the design to prevent damage to the cars paint/parts.
Works great even using an electric bike like my Aventon Soltera.
# 7
Yakima FullBack 2 Bike Rack - Trunk Mount - Adjustable Arms
First rack I've ever purchased I misplaced the end bar used to lock the bikes onto the rack. Can I buy another one?
Audi SQ5Loving my bike rack it looks really stylish on my SQ5. It’s super easy to install, I don’t even need any help, so win win. It’s also sturdy, I have travelled multiple times from ATL to FL without any issues. The only problem is the bottom bar has a hard plastic, which rubs at the bottom of my hatch below the plate. I fixed this by cutting a pool noodle to protect my car by adding it to the bottom over the hard plastic. And added rubber stoppers under the top straps to stop shafting on the trunk spoiler. All and all good buy!
# 8
Swagman Trailhead Bike Rack for 4 Bikes - 1-1/4" and 2" Hitches - Tilting
This is a very solid product! I have used it for over a year now and love it! I have had up to 3 bikes on this without a problem and have traveled over 8 hours in the car one way with absolutely no issues. Many other bike racks like this one that I see on other cars look unstable this is not unstable in anyway. I did have to file some of the paint off of the rack to get it to fit in my 1 and 1/4" hitch but once that was done it has been perfect. I also bought the locking hitch bolt which is awesome too.
Well built and good quality. So glad I can haul bikes easier with our Honda Pilot now!
# 9
Yakima FullBack 3 Bike Rack - Trunk Mount - Adjustable Arms
Performed perfectly on a 140 mile round-trip in my 2017 Acura MDX. It took me a few tries to position the anchors inside the top of the hatch, but I got the hang of it and the rack did not shift at all while driving 50-60 mph on the highway.
This product is steady, but heavy and I'm not sure it's good for RAV4 2024. I used it one time with 3 bicycles, and the lower touching part made the trunk door dented because of the pressure.
# 10
Kuat Sherpa 2.0 Bike Rack for 2 Bikes - 1-1/4" Hitches - Wheel Mount - Gray
After doing extensive research before buying my first ever bike rack, I chose the Kuat Sherpa 2.0 platform rack. I considered trunk mounted, hanging and platform racks before settling on a platform rack. I like the stability, the ease of loading and unloading and very importantly, the absence of contact with the frame of my bike. My bike has a beautiful paint job that I want to preserve. I looked at lots of racks online and at a bike shop and opted for the Kuat Sherpa 2.0 because of the excellent engineering, including the design of the packaging that becomes a work bench for assembling the rack, the relatively light weight (32 pounds), the inclusion of a hitch lock and a bike lock, the stability of the platform, even with a 1.25" connection and a class I hitch, and the ease of operation. Additionally, the overall appearance of the rack suggests high quality. Time will tell how well it ages but I'm pretty confident that I'll be pleased with it. I was very fortunate to find a used, like new Kuat via Etrailer at a meaningful discount that still qualified for the manufacturer's warranty! Thank you Etrailer! A tip to pass along that was shared with me, U-Haul is an excellent source for buying and installing hitches to accommodate bike racks - very attractive pricing, high quality installation and a super unlimited lifetime warranty. Can't wait for Spring and the chance to transport my bike to inviting riding venues!! PS The hitch and bike rack work very well with my 2011 Honda Accord Coupe, EXL V6 model that remains in excellent condition.
I’ve had the Kuat Sherpa for about a year now and could not be more happy with this bike rack. When not in use I keep it safely in the garage- it only takes a few minutes to install it to my Honda Civic and safely secure two bikes using its exquisitely engineered and designed system. I’ve used this for 900+ mile trips with no issues whatsoever - the perfect bike rack!
# 11
Swagman Chinook Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
Works for my fat tire bike. Once it's set up, it's easy to install and remove. I had to cut out some of the plastic cladding on the underside of my bumper on my 2014 Subaru Outback. Good value. I've had no issues.
GI love the Rack, it is easy for me to handle, (as a 89 yearold rider.), two bikes ride and fit very nicely. Like how it folds down,and how it folds to open the tailgate . Great quality for the money, I would highly recommend this rack
# 12
Kuat Sherpa 2.0 Bike Rack for 2 Bikes - 1-1/4" Hitches - Wheel Mount - Black
All in all pretty good. The arms that grab the front wheel have loosened a little bit and move side to side. They have never failed, just feel a little wobbly. The hitch receptacle is also hard to tighten but might be due to the receptacle it self. Used rack on a long trip and the bikes moved slightly side to side, but nothing serious.
Great bike rack. Compact, great on trips, easy loading/unloading bikes. Easy removal when not using.
# 13
Swagman Trailhead Bike Rack for 3 Bikes - 1-1/4" and 2" Hitches - Tilting
My previous bike rack was a hitch mounted Yakima. It was sturdy but not well suited for my low Subaru Impreza. It stuck out too far and hung too low so that I had to inch my way down the driveway or over speed bumps for fear of it bottoming out. A roof rack or a rear window mounted rack was not suitable since I wanted to be able to also carry two kayaks. First, I tried to modify my rack by shortening the part that sticks out of the hitch. I tried to saw off about 6 inches so it wouldn't stick out so far but the steel was much too hard. I ended up ruining several metal-cutting blades on my power saw before I gave up. I looked for other rack options. There weren't many out there. But eventually, I found something that met my needs. I purchased the "Swagman Trailhead 3 Bike Fold Down Bicycle Hitch Rack" in 2013 from eTrailer.com. The part that enters the hitch curves up to increase clearance from the ground. It is sturdy and sticks out far enough so I can still open my trunk hatch without having to lower the main vertical bar on the hitch (though I could if I wanted to). It isn't often I am really excited about a piece of gear but this hitch rack has made me worry-free when I transport my bicycle(s) via car. The only thing I don't like is that it is advertised as being a 3 bike carrier but it only fits 2 hybrid bikes. Maybe it will fit 3 skinny racing bikes but for the average rider, don't expect to fit on more than 2. But my experience is that is the case for all bicycle racks.
Nice heavy duty rack. Putting it together is quite simple if you read the instructions. I like the ability to use both a 2" or 1 1/4" receiver. etrailer is very easy to deal with.
Installing the Inno Tire Hold Bike Rack for 2 Bikes on your 2022 Toyota Prius
This right here is the NO tire hold. And we're taking a look at it on our 2022 Toyota Prius. This is a pretty unique bike design when it comes to the rack. There's a couple of other ones on our website, but this is the most entry level option. I really like the dual tire hold because it doesn't have any effect on our frame. So we can use our carbon fiber frame bikes.
Install: Hollywood Racks Destination Bike Rack for 2 Bikes on a 2022 Toyota Prius
This is the Hollywood Racks Destination 2. And our vehicle is a 2022 Toyota Prius. This is gonna be the most entry level rack when it comes to platform styles. It is gonna limit us to 35 pounds per bike. And we do wanna make sure we don't get those longer mountain bikes just because the wheel base has a max of 48 inches. And when it comes to the fat tire bikes, if they are under 35 pounds we're still not gonna be able to put them on here because our cradles right here are going to limit us to three inches per bike.
DIY 2018 Toyota Prius Installation for the SeaSucker Komodo Bike Rack for 1 Bike
Hello, neighbors, it's Brad here at etrailer. And today, we're taking a look at the SeaSucker Komodo Bike Rack on a 2018 Toyota Prius. Now this is gonna be available in four different color schemes. Now this is great for any vehicle, really, as long as you have a surface that it can mount up to, it's going to work great. And predominantly, you're gonna see it on sports cars or cars that really can't have a trailer hitch. So my friend has a Civic Type R that has three exhaust pipes where a hitch would be.
Inno Hitch Bike Racks Review - 2018 Toyota Prius
Speaker 1: Today on our 2018 Toyota Prius, we are going to be test fitting out Inno Aero Light, four bike, rack for inch and a quarter and 2 inch hitches. Part number INH640.We already have a bike rack installed, so let's take a look at some of the features before we remove it. Starting from the outside in, the bike rack comes with an integrated cable lock system, in order to secure your bikes to the rack, to prevent any type of theft occurring. You simply just pull it up, wrap it around the bikes, as needed, and insert it in to the little latch. For unlocking it, the bike rack comes with its set of keys. You simply slide this little tab up, insert your key in, and you can unlock your bikes for unloading.Each cradle has a thick rubber coated surface, in order to protect your bike frame during travel.
Inno Hitch Bike Racks Review - 2018 Toyota Prius INH620
Speaker 1: Today on our 2018 Toyota Prius, we're gonna be test fitting the Inno Aero Light 2 Bike Rack for inch and a quarter, and two inch hitches, part number INH620.We already have a bike rack installed, so let's take a look at some of the features while it's on there. Starting from the outside in, we have an integrated cable lock system in order to secure your bikes to the bike rack to prevent theft. You simply just wrap it around your bikes and insert it into the lock. And it comes with a key, a notch just slides up, you insert the key in to unlock it, and for unloading your bikes.The cradles come with a thick, rubber coated surface in order to protect the frame of your bike from any type of damage. The cradles themselves can pivot from side to side, and move back and forth in order to suit your specific needs for your bikes, or even your frames sizes.The bike itself is attached at three different points on the bike rack. We have two plastic straps at the top of the frame, on the front, and the rear.
Test Fit: RockyMounts MonoRail Solo Bike Rack for 1 Bike on a 2018 Toyota Prius
Speaker 1: Today in our 2018 Toyota Prius, we are going to be test fitting the Rocky Mounts Monorail Solo one bike platform rack for an inch and quarter and two inch hitches. This is going to be Part Number RKY10007.We already had the bike installed on the racks. Let's go ahead and take a closer look here. Unlike most of the other single platform style bike racks, this one can actually tilt away from the vehicle to gain rear hatch access. To do that, we have this blue handle up at the front. We'll pull that towards us and let it tilt away.
How to Install: Hollywood Racks Destination Bike Rack for 2 Bikes on your 2015 Toyota Prius
Hi everyone. It's Evangeline here at etrailer.com. And today we are looking at our Hollywood Racks Destination 2 bike rack for our 2015 Toyota Prius. This is a great bike rack to have if you are concerned about weight. If you have a Prius and you have great gas mileage, but you want to make sure that your bike rack doesn't weigh you down, this is a great option for that. The way our bike is mounted to this bike rack is by three points.
How to Set Up Your Inno Tire Hold Bike Rack for 2 Bikes on a 2015 Toyota Prius
Hi, everyone. It's Evangeline here at etrailer.com. And today, we are looking at our Inno Tire Hold 2-bike Platform-Style Rack here on our 2015 Toyota Prius. This is a great bike rack. If you want something that has an easy breezy install process, as well as if you want to have the opportunity to carry heavy electric bikes. One of the features of this bike rack is that you can tilt it away.
Saris Freedom SuperClamp Hitch Bike Racks Review - 2014 Toyota Prius
Today on our 2014 Toyota Prius, we're going to be doing a test fit of the Saris Freedom, this is going to be your super clamp platform style 2 bike rack. It does come with your 1 1/4 shank for your 1 1/4 class 1 and class 2 hitches as well as a 2 inch adapter for your class 3 and up. Also it's going to be part number SA4025 and we'll go ahead and fit it onto our class 1 hitch that we have here today. Insert your shank into your receiver and line up your pin holes. Once you have your pin holes lined up, insert your anti rattle bolt to move the lock in and place that through. Thread it in as far as you can by hand this anti rattle bolt is going to help to eliminate a lot of the play, rattle and wobble that you may have in your bike rack and I'll show you that as soon as I get it hand tightened. With a regular pin and not an anti rattle bolt, this is the kind of bouncing, swaying and rattle you would have.
Saris Axis Hitch Bike Racks Review - 2014 Toyota Prius
Today on our 2014 Toyota Prius we're going to be doing a test fit of the Saris Freedom. This is going to be your hanging-style 2-bike rack. It is tilting and it does come with an 1-1/4" shank with a 2" adapter. It's going to be part number SA832. Let's go ahead and place it onto our 1-1/4" class one hitch that we have here today. Go ahead and slide it in until the pinholes are lined up.
Saris Thelma Hitch Bike Racks Review - 2014 Toyota Prius
Today on our 2014 Toyota Prius we're going to be doing a test fit of the Saris Thelma. This is going to be your platform-style 3-bike rack. It's going to be for our 1-1/4" receiver that we have here today. You'll see that it does have an 1-1/4" shank, but it also comes with a 2" adapter for your bigger hitches. It's going to be part number SA4239B. Let's go ahead and place it onto our Prius. Go ahead and insert your shank into your receiver and line up your pinholes.
Thule Doubletrack Hitch Bike Rack Review - 2013 Toyota Prius
Today on our 2013 Toyota Prius well be test fitting the Thule Doubletrack Platform Style 2-Bike Carrier, part number th990xt. To begin our test fit well slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole, and thread in our anti-rattle bolt tightening it down with a wrench. Now well go over a few clearance measurements. We have about 10 inches of ground clearance. The closest point of the carrier here at the wheel cradle is about 3 inches from the closest point of the vehicle. Weve added about 12 inches to the overall length of our vehicle.
Installation: Swagman Titan Bike Rack for 4 Bikes on a 2013 Toyota Prius
Today on our 2013 Toyota Prius we'll be fit testing the Swagman Titan 4 bike carrier part number s63410. Please keep in mind that when using a class one hitch, you can carry a maximum of two bicycles. To begin our test set well slide the shank of the carrier into the receiver tube of the hitch. Line up the pin hole and thread in our anti-rattle bolt, tightening it with a wrench. Now well go over a few clearance measurements. We have about thirteen and three-quarter inches of ground clearance the closest point of our carrier to the rear of the Prius is about nine and half inches and weve added about twenty-one inches to the overall length of our Prius. As you can see we can gain access to the rear hatch without having to tilt away our carrier. If we do want to tilt away our bike rack we simply pull the lever on the back side of our bike rack and allow it to tilt away.
Mount: Kuat Beta Bike Rack for 2 Bikes on a 2013 Toyota Prius
Today on our two-thousand-thirteen Toyota Prius we'll be test fitting the Kuat Beta, folding aluminum two bike carrier, part number b202-114. To begin the test set well slide the shank of the carrier into the opening of our hitch. Line up the pin holes and install our pin and clip. Well move to the rear of the shank and tighten the hand knob to secure our bike rack to our vehicle and engage our anti-rattle device. Now well go over a few clearance measurements. We have about thirteen and a quarter inches of ground clearance. The closest point of the carrier to the rear of the Prius is about seven inches.
Thule Helium Aero Hitch Bike Rack Review - 2013 Toyota Prius
Today on our 2013 Toyota Prius well be test fitting the Thule Helium Arrow 2-Bike Carrier for 1-1/4 and 2-inch hitches, part number TH9042. To begin our test fit well slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole and allow the attached pin to fall into place. Well move to the rear of the shank and tighten the hand knob to secure our bike rack to our vehicle and engage our anti-rattle device. Now well go over a few clearance measurements. The closest point of the carrier to the rear of our Prius is about 3 inches. Weve added about 19 inches to the overall length of our Toyota Prius.
Thule Domestique Roof Bike Rack Review - 2013 Toyota Prius
Today on our 2013 Toyota Prius we'll be test fitting the Thule Domestique Fork Mount Bike Carrier part number TH513. With the Thule Aeroblade Roof Rack System assembled onto our vehicle, we'll begin our test fit by placing the Domestique directly onto our roof rack. With our carrier on our roof rack, we'll go ahead and reinstall the bracket. When we have the bracket in place we can tighten the Allen bolts using an Allen key. Once we have those tight we'll move to the rear, bring our rear clamp around our rear bar, feed the bolt back through, and tighten with an Allen key. Now we can go ahead and reinstall our skewer at the front. We'll want to make sure that we leave the skewer loose and that we undo the rear wheel strap.
Thule Big Mouth Roof Bike Rack Review - 2013 Toyota Prius
Today on our 2013 Toyota Prius well be test fitting the Thule Big Mouth Roof Mounted Bike Rack, part number th599xtr. Well begin our test fit by placing our bike rack directly onto our load bars. Well fit our brackets around our front bar. Well place our bolt back into the slot of the bracket and tighten with the wing nut. Well do this for both clamps at the front of our carrier. Now well move to the rear, slide our bracket onto the bolts, and tighten using the two wing nuts.
How to Set Up Your Swagman Fork Down Roof Mounted Bike Carrier on a 2013 Toyota Prius
Today on our 2013 Toyota Prius well be test fitting the Fork Style Roof Mounted Bike Carrier from Swagman, the Swagman Fork Down, part number s64710. To begin our test fit well place the carrier directly onto our load bars. Here at the front, well take our u-bolts and feed them up underneath our load bar, through the platform and tighten with the wing nuts. Well do this for both sides of the platform at the front of the carrier. Here at the rear, well drop the u-bolt through the top of the carrier making sure it goes around our rear load bar, fit our bracket through the u-bolt, and tighten with the wing nuts. We want to make sure that our rear wheel strap is undone and that our skewer at the front is loose.
RockyMounts TieRod Stretch Roof Bike Rack Review - 2013 Toyota Prius
Today on our 2013 Toyota Prius well be test fitting the RockyMounts TieRod Stretch Roof Mounted Bike Carrier part number RKY1011. With the Thule Aeroblade Roof Rack System assembled onto our vehicle, well begin our test fit by placing the RockyMounts TieRod directly under our load bars. Here at the front, well go ahead and bring the straps around our front bar. Well fit the straps into the head of the carrier and then use an Allen key to tighten down the Allen bolts. With our straps tight, we can go ahead and replace the black plastic cover. Well move to the rear and loosen up our rear clamp.
Thule Vertex 4 Hitch Bike Rack Review - 2013 Toyota Prius
Today on our 2013 Toyota Prius, we'll be test fitting the Thule Vertex 4 Bike Carrier, part number TH9029. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of our hitch. Line up the pin hole and thread in our anti-rattle bolt, tightening it with a wrench. Now, we'll go ahead and go over a few clearance measurements. We have a ground clearance of 11-1/2 inches. The closest point of the carrier to the rear of the vehicle is 5 inches.
Install: Thule Hitching Post Pro Bike Rack for 4 Bikes on a 2013 Toyota Prius
Today on our 2013 Toyota Prius, we'll be test fitting the Towie Hitching Post Pro folding, tilting, four bike rack with anti-sway part number TH934XTR. Please be aware that when using a class one hitch, you can only carry a maximum of two bikes. To begin our test fit, we'll slide the shank of the carrier into the receiver tube of our hitch. Line up the pin hole and thread in the anti-rattle bolt, tightening it with a wrench. Now we'll go ahead and go over a few clearance measurements. We have a ground clearance of eleven inches. From the closest point of the bike rack to the rear of the vehicle is eight inches and we've added eighteen inches to the overall length of our vehicle. Now we'll go ahead and pull the pin at the base of the carrier, to allow our carrier to tilt. With it in this position, we can gain access to the rear hatch of our Prius pretty easily.
Thule Apex 4 Hitch Bike Rack Review - 2013 Toyota Prius
Today on our 2013 Toyota Prius we'll be test fitting the Thule Apex Four Bike Carrier, part number th9025. To begin our test fit we'll slide the shank of the carrier into the receiver tube of our hitch, line up the pin hole and let the included pin fall into place.Then at the rear of the shank use the hand knob to secure our bike rack to our vehicle and engage our anti-rattle device. Now we'll go ahead and go over a few clearance measurements. We have a ground clearance of 11-1/2 inches.The closest point of the carrier to the rear of the vehicle is 3-1/2 inches. We've added 14 inches to the overall length of our vehicle. Our rear hatch opens without making contact with our bike carrier.
Kuat Sherpa Hitch Bike Rack Review - 2013 Toyota Prius
Today on our 2013 Toyota Prius we'll be test fitting the Kuat Sherpa Aluminum Platform-Style Hitch Mounted Two Bike Rack, part number s102. To begin our test fit we'll slide the shank of the carrier into the receiver tube of the hitch, line up the pin hole and install our pin and lock. Then we'll move to the rear of the shank and use the hand knob to secure our bike rack to our vehicle and engage our anti-rattle device.Now we'll go ahead and go over some clearance measurements. We have about 14 inches of ground clearance. The closest point of the carrier to the rear of the Prius is about four inches. We've added 15 inches to the overall length of the Prius.
Review of the Saris Bones EX 3 Bike Rack on a 2012 Toyota Prius
Hey everyone, it's Evangeline here at etrailer. And today we're taking a look at the Saris Bones EX 3 trunk mounted bike rack, right here on our 2012 Toyota Prius. We do you have this available as the two or the three bike option. I say go ahead with the three bikes, so that the more the merrier. If you wanna carry around some bikes and you've got your Prius, your options are limited if you don't have a hitch. Ideally, please get a hitch receiver so you can get a hitch mounted bike rack.
Thule Hitch Bike Racks Review - 2012 Toyota Prius
Today on our 2012 Toyota Prius, we'll be doing a test for the Thule Roadway 2 Bike Rack. That's part number TH912XTR. I've already got it loaded up on the Prius just to give you a good idea of what it's going to look like and how it's going to hold our bike. It is a hanging style bike rack, as you can see. It secures out bike in 3 spots. We have 2 straps for our top 2. Then 1 strap for our seat post 00:00:22 2.
What our customers are saying:
"I think this website is very useful for hitches and every other stuff as bike rack and wires harness for vehicle. I would recommended this site to everyone I know."