Best Toyota Highlander Boat Trailer Parts

Absolutely love the guide on especially when backing your trailer in without the boat and you can’t see the trailer. Highly recommend them. It would be great if they came with reflector strips for travel.

These Smith guides are fantastic quality, easy to install, and a decent price. What’s not to like? Super fast delivery and all parts included. Go a set for a sailboat and a Wooldridge crab boat.

Love it! Boat was previously resting on carpet boards and was a little difficult to slide boat off into water or had to back truck into water to get boat to float off trailer. And then could only drive boat about 2/3 the way up trailer and then winch it the rest of the way. With the rollers it slips right off. Loading; I can drive it all the way up the trailer! Much much better handling my boat!

I received the roller bunkers but had to wait a few weeks to install them and try them out. I put the 5' roller bunks on 8' carpeted, wooden bunks as your instructions suggested (centered). Once I had the hardware it was a simple process. I took my boat out of the water and could not believe how much easier it was. After I serviced my boat I put it back into the water. I basically had to hold the crank handle to keep the boat from sliding into the water too quickly. I am so pleased with this product, and the best part...I didn't even get my truck tires wet.

I took a fishing trip to Quebec Canada and had to travel 115 kilometers on a dirt rd resulting 5 of my original bunk brackets cracking. The lodge personnel welded them so we could get home. Replaced them with your brackets that are a lot stronger and easy to install. Looking forward to next trip

So far so good. The brackets are working fine so far. Haven't put the trailer on the road yet, but the boat requires bunkers to have a curve or bow in them. The middle brackets stand the torsion as well as the weight of the boat. Easy to install as well.

Great product. Easy to apply to trailer. I would not suggest application on back portion of trailer for pontoon boats. They are too short to see when loading the pontoon boat. I bent 2 sets by a soft bump when I did not see it.

Easy to install ! Need an impact drill I installed two sets . One set at the rear of the trailer and one at the front.

This is my second order of bunk boards from etrailer. Solid products at a better price than I could find elsewhere. Quick delivery, too. This time I replaced two 12 foot boards with four 6 footers, and used a bottom steel plate to lock them together. Working great. (There are still 2 mounting spots for each board.. so I don’t anticipate any issues). These aren’t made with pressure treated lumber, but that’s what I have to use because aluminum pontoons can be damaged by lumber treatment chemicals. Better to be safe than sorry. So I’ve just resolved to myself that replacing my bunk boards will be routine maintenance going forward. Thus far I’m getting at least 4 to 6 years each, and several longer than that. And it’s nice to get reasonably priced replacements from etrailer. (Sure, I could install those fancy synthetic boards and they would last forever. But my trailer has 8 bunk boards, including the two 12 footers. It would be very, very, very expensive. Not worth it. I’ll stick with using etrailer.)

Great quality Direct fit for my loadrite PWC trailer

I damaged one of the side rollers recently on my boat trailer so I ordered a new set from you. I am very impressed with the quick delivery and of course with the quality of products that you sell. This is the third time I have or from your company thank you

These rollers are awesome! The perfect solution to my problem. I have a 16' Gheenoe and there was an issue loading my boat. As I am a paralyzed vet trying to load the boat by myself from a wheelchair on the ramp. There was too much room from the rear guides to the front of the trailer in which the boat could drift left or right before I got it positioned. These rollers help guide her on and keep it going straight. I can now load/unload like a pro. Now if only etrailer could help me catch fish.....

Great, quality and easy to use and install.

I bought a 2007 16' Carolina Skiff for $3500 back in December. The dealer said there was nothing at all wrong with it and he went over it and winterized it. I finally got around to putting it in the water and saw that the bunk boards were in terrible shape, with one side rail guide-on falling off. I took it to a marina repair shop and was told it would be cheaper to buy a new trailer instead of replacing the bunk boards. I contacted Ashley at etrailer about buying a set of bunk boards and all of the brackets and hardware for it. $370.00 later I had a full set of bunk boards and guide-ons being shipped to me. I don't think I could find a new trailer for that price. It took longer to remove the old ones than it did to put the new ones on. About 3 hrs later I had a new trailer. These bunk boards and guide-ons fit my boat and trailer perfectly. Thank you Ashley and etrailer for great customer service and a very good product at a really decent price.

These bunks are well built, easy to install, and make guiding the boat onto the trailer so much easier. Great purchase. Quick response from trailer

These guide ons really help me and my wife get our pontoon loaded easily. Would highly recommend to anyone.

Customer support was great, a live person who happily spent some time on the phone. I ended up not using them for my car roof rack that holds my outrigger canoe. I ended up using some traditional u bolts which fit a bit better. I had to compare them on the rack to decide. While they were fairly expensive, [for] the bolts with shipping. It would have been worth it if they had fit better than the u-bolts. I did not return them and will probably find a use for them on some other project. Quality of the bolts seemed good.

Haven't installed the items yet, but they seem of good quality & are exactly what I need & what I expected. Shipping was quite fast & communication excellent! Should the need arise, I'll do business with etrailer again.

as described, should be an easy install as hardware is all included

Helps save the bow when putting your boat away. Wish I had this before I cracked the trolling motor housing.

Husband very pleased..Exactly what he needed for a very old jet ski trailer and stated they were better quality than expected..Quick delivery.. Thank you..

Good quality, exactly what they said it was

Our 1999 yacht club trailer was brought back to life totally stripped down sandblast it primed ,repainted it now has all new hardware, new bunks , New LED lights but by far the bank hardware is absolutely strong and durable And rest a sure I will never Have to replace these top-quality bunk hardware Also a big shout out to e-trailer to getting my merchandise within five days

Thank you for reaching out to me. Well what do I think, I think I bought the wrong thing. One it’s heavy duty I don’t need heavy duty. And the pre-drilled holes in my trailer are too wide for the holes drilled in the brackets. You guys did a great job I think I made a mistake. Thank you again for reaching out to me.

This was my first experience with buying from trailer and was not disappointed. I purchased a set of 40” Heavy Duty Black Post-Style Guide-Ons for my Tracker Pro-170 bass boat and item was received exactly as described on the web site and shown in the videos. The posts were incredibly easy to install (thanks to the instructions included and the web site video). Outstanding customer service and product support! The post guide-one are excellent and perform superbly in assisting trailering of my boat.

Second set to get the bow aligned. These are great and easy to install. Very solid.

Just What I needed Perfect for My Project

Good quality roller. Exactly what I was looking for.

Good overall, but quality of galvanizing is not the best, several have largs chips missing, where the metal is exposed underneath.

AS ALWAYS E-TRAILER IS RIGHT ON EVERY TIME YOU CAN NOT FIND A BETTER PLACE TO TAKE CARE OF ALL YOU TRAILER NEEDS

They look like good quality brackets. I will know more later if they pass the salt water test. Living in the Pacifac Northwest, I am always putting the trailer into the salt. But I think these brackets will handle it.

I purchased these brackets for my trailer so that I could setup for kayaks. They came through and delivered item very fast on such a tight schedule. Items were perfect and they look great on my trailer. Their service was outstanding and I am extremely pleased. Thank you. They earned my business for the future fixeruppers. Thanks again

Easy to install and they work great for our jet ski trailer. Much better than the old bunks and carpet. The rollers do not leave any scuff marks and our two machines glide off and on with ease. Great Product!!

So far, they work very well. My 14 foot Star Craft boat that is extremely heavy would not unload with wooden bunks. I can now push it off into the water. etrailer is great to do business with. Thanks

ETRAILER ships FAST! Rollers are on a galvanized frame with holes for mounting. ETRAILER and Smith also offer other mounting options. Rollers appear to be solid yet not so hard to mar fiberglass hulls.

I’m the old guy and it really makes a difference, unloading my boat under my trailer. Don’t know what I could do without them simply love them. Works awesome with my automatic latch system.

I use this roller for a 16.5 ft Klamath that I launch in very shallow water. These rollers as well as roller bunks allows for easy launching. This roller helps get the boat onto the trailer as I have to winch it on. I haven't noticed any damage to the roller after 6 months of use in salt water.

This item is a lot smaller in diameter than the stoltz roller I am replacing. Which is my own fault for not looking at the circumference of it before I bought it. I have always used stoltz rollers in the past, and in my opinion from just the weight and the feel of this Yates roller I would say the Stoltz rollers will outlast this Yates by far. Only time will tell. Hopefully I am wrong.

Great product! I've replaced my bunks several times over the years with carpet from the big box stores. Always lasts about 2 years, primarily because of wear where the boat slides onto the end of the bunks at the rear of the trailer. This time I decided to try a product that was actually designed for trailer bunks. One year later and my bunks still look great! For just a few dollars more I'm expecting these to last many years. We keep our 24' bow rider in dry storage so we trailer it after every use (weekly in season) and it's gets a lot of wear and tear. We are very happy with this purchase and would recommend this product to anyone looking to replace their trailer bunks!

Great service very fast shipping and great product.