# 1
Roadmaster Polyurethane Bushing Kit for 1-1/2" Diameter, Factory Rear Anti-Sway Bar
Parts were as described and delivered as promised. The installation video was very helpful as I installed the Bushing Kit myself. The bushing were the proper size and installed with little issues.
After disappointing schedule for ship delivery date and call to etrailer they made it right and got it picked wrapped and shipped Received it today and got it installed Ready to roll Saturday morning for trip to lake Everything fit well and about hour and half installation time!
# 2
Replacement Sway-Control Bracket for Equal-i-zer Weight Distribution - 6,000 lbs to 14,000 lbs GTW
I like the ease of set up, they work good . just wished I had two more sets,for other trailers.
Needed these to replace brackets I left on a trailer that was sold. Glad I came across this site!
# 3
Custom Mounting Brackets for Roadmaster Reflex Steering Stabilizer
Make sure you call roadmaster to confirm the correct part number to make sure you get the proper installation kit for the reflex steering stabilizer. I found out there are numerous hardware kits for the different applications. If I would have ordered the one I thought I needed it would have been wrong.
Perfect fit for my 2023 Coachman Pursuit
# 4
Replacement Motor for Kwikee Electric RV Steps - 12V
Thanks Brittany for assisting me with this order. The motor works great easy installation. etrailer is a great company to work with.
etrailer customer service is 5 star however kwikee step motor and gear box are poor design, short life span. Uses a metal gear meshing to plastic gear is terrible engineering. I replaced 3 motors and 1 gear box on 2 different Tiffin in 10 years. I’m sure some owners have had better luck but hasn’t been my case and according to social media a lot of people post step problem. I ordered my last motor from etrailer because along with my 10 year history with buying from etrailer if you call them they make sure you buy the correct part. They ship on time and I have never had a problem with them but confident if I did it would get resolved quickly and satisfactorily.
# 5
Replacement Standoff for Stromberg Carlson Exterior RV Ladders - Qty 1
These should come with the screws to mount on RV. I bought them to add strength to the ladder rather than replace supports. I mounted the ladder and used two extra support pegs to strengthen my ladder around where the bike rack attaches. Went well.
I received the ladder 8535 in good shape and a day early. I had to use the full ladder with no cuts and with hinges to give me the EXACT length required. This resulted in a 30 inch space in the very middle of the ladder. Stromberg-Carlson sent a universal rung to fit there. With my own materials I added a rung at the very bottom on the bend. I added hose clamps under each rung for added support. It all turned out looking GOODprofessional and solid. JFS
# 6
Bought a used RV that had a rear view and two side cameras — but the radios screen was stuck on one camera all the time. I installed this today and all three cameras now work perfect. Awesome product and extremely fast shipping.
Service was great. Delivery to Canada was easy.
# 7
Replacement Quick Disconnect Crossbar Assembly for Roadmaster Tow Bars
Want to thank Jaime and all of etrailer for there quick response and shipping. On the way from Illinois to Disney World at our last overnight someone pulled a pin on my Roadmaster tow unit and as we were entering the highway half the unit came unhooked and bent the crossbar. Wife had to drive 5 hour by herself but now with etrailers help I have the new crossbar that was shipped to Fort Wilderness and we are set to continue on our way for the rest of our trip.
Thank you Naomi for steering me in the right direction on this crossbar. It fit perfectly for my needs on my 2006 chevy HHR. Qaulity of the product is very nice. etrailer shipping was very quick on all of my purchases for my towning project. Thanks for the best customer support.
# 8
Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 4" Rise/Drop - 6K GTW, 200 lbs TW
Seems sturdy and well made with a good finish. What more is there to say? I'm only using it for a bike rack, but would have no hesitation to use it for more robust duties.
The tow bar rise extension was exactly what I needed to raise up the attachment point for my Roadmaster Falcon All-Terrain tow bar when pulling my Jeep Wrangler. Perfect fit and finish.
# 9
Replacement Red Lens for Optronics MC32RB and MCL32RB Trailer Lights
Firestone air bags, on-board air and analog control. Great system I installed myself and custom integrated into my console. Thank you etrailer!
good advice, great service and fantastic products.....
# 10
Blue Ox Base Plate, Tow Bar Receiver, and High-Low Adapter Lock Kit - Keyed Alike - Qty 4
Works great! It’s nice to use one key to lock and unlock all four pins.
Everything needed to set up our Jeep Wrangler for flat towing. A very straightforward installation, and great customer support!
# 11
Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 2" Rise/Drop - 6K GTW, 200 lbs TW
Had to put on Motorhome because Jeep was 4" higher and roadmaster recommends tow bar to be within 3" high or low. Had to extend safety cables
Very, very good quality product. It works perfectly for towing my Jeep Wrangler with a good room of towing capacity for extra safety. I also purchased the Towmaster locks to go with this and they are of super good quality too. Just push on the locks and you're good to go.
# 12
Replacement 7-Way to 6-Way Coiled-to-Straight Cord for Roadmaster Nighthawk Tow Bar - 8' Long
Jaime, you did one hell of a job helping me with my Roadmaster tow bar wiring issue. I did receive the power cable today. Expedited shipping was a great help. It was packaged nicely and I have already installed the cable. You people at Etrailer.com are fantastic. Keep up the good work.
Need to include extra butt ends connectors in the package, destroyed both of them trying to install the 1st time & had to make a run to Lowes. The video on how to install it was a great help; but VERY misleading...the video made it look easy, it wasn't! But got it done.
# 13
Camco Lights Out Retractable Shade for RV Roof Vents
So I give it five stars, but I'm not commenting on durability with that rating. I mounted this to cover a standard 14" square vent in an enclosed car trailer that we camp in sometimes. Installs in about two minutes with just a screwdriver, and it fits over the opening just fine. It is not a blackout curtain, but it cuts WAY down on the light coming through so I think it will help if trying to sleep past sunrise. It isn't heavily built, and hopefully the UV doesn't make the mounting clips brittle. If not, I'm happy for my purposes. It definitely blocks light, so I think it will block some heat also, but that was not my primary reason for buying. Very satisfied overall if it holds up.
This is is the fourth shade I’ve gotten for my RV- now all skylights are covered. They work great and help to cut down on heat from the sun and light at night
# 14
Replacement Lippert Control Panel with Amp Connector for 4-Point Leveling System
Ordered this product on line, with help from a rep because I was uncertain of the exact model I needed. Rep was patient as we went through my questions and was spot on with the right item. The control panel worked perfectly and had no further issues. I have since sold our motorhome, but when we get another one will not hesitate to call Lippert again if I am in need of parts.
This part did the trick. Old panel took 5-10+ minutes to turn on. Finger got sore holding down the button for so long. When needing to retract the jacks sometimes I had to resort to putting the motorhome in gear (with brake on) to force the jacks to retract. New unit turns on with a short press of the On/Off button. Lippert would not sell the unit to me directly so etrailer.com is the way to go. Lippert knows this part is defective and should offer something less expensive to replace it. Mine lasted about 7 years. What will happen in 7 more years when this one stops working?
# 15
Replacement Base Pins with Chains and Clips for Roadmaster Tow Bars - Qty 2
Perfect fit and exactly as the original base pins. This was a great option for replacing my worn pins with 20K miles on them. As always trailer is my go to.
Items we needed for tow bars on motorhome and glad to find them on etrailer!
# 16
Quick-Disconnect Padlocks for Roadmaster Tow Bars - Qty 2
These are good quality locks and I would buy them again. I’ve been using them for a year. The quality is still like new. 4 stars because the shaft needs to be slightly longer. When we attach them we have to tilt them in order for the pin to latch. We discovered this the first time we used them. We thought we had closed them tight, but didn’t. Fortunately, we only drove about a mile to a gas station, where I walked around checking everything and noticed one was off-center.
Fits with RM52927-5 direct connect base plate
# 17
Replacement Standoff Nut for Stromberg Carlson RV Exterior and Bunk Ladders - Qty 1
Have been looking for these insert nuts for quite sometime to repair my boat windshield support mounts. Even specialized fastener companies were not familiar this item. I just so happened to come across these insert nuts for RV ladders and stand-off mounts! I thought a tube is a tube, whether it be on a boat or RV, and I was right. I ordered 4 of them so that I could go ahead and replace all of the old ones before they completely fail, as they are about to. Here is the first one done. The only negative issue I had was that one of the rings fell off of each of the nuts as they were being inserted into the tube. One was the bottom one and the other was the top. However, the one ring seems to be holding fine right now. I included some pictures to include the model of the windshield mount in the event others are having a similar issue.
Extremely happy with etrailer. I ordered two star nuts to repair our RV ladder. Order was filled promptly. One of the nuts bottom star popped off and could not be used. Upon receiving an rating form from etrailer, I explained my disappointment in one of the products being defective. Within one hour etrailer replied and stated they would refund cost of one or send new one to replace. I asked them to send a new one. They sent two instead so I would have a spare! Outstanding customer service!
# 18
Equal-i-zer High-Performance Lubricant - 4 oz
Great lube for my Equalizer hitch!
Great product, recommended by the hitch manufacturer.
# 19
Replacement Door Switch for Lippert Electric Coach Step
exact replacement, fixed the problem
Quick, fair price & kept informed!
# 20
Replacement Hydraulic Jack Assembly for Lippert Level Up System - 8,000 lbs
What can I say, it’s a jack that has been working as intended for a year. I bent the last one in a boa headband move.
will never buy from you again.
Setting Up Your Roadmaster Motorhome Battery Charge Line Kit - 2018 Thor ACE Motorhome
Hey everyone, Shane here with etrailer.com. Today I have a 2018 Thor ACE Motor Home. I'm gonna walk you through how to install Roadmaster's battery charge line kit for motor homes. This is what it's gonna look like when it's installed. It's gonna connect to the house batteries or the batteries in your motor home. It's gonna run back to your seven pole plug.
Ultra-Fab Duo-Therm RV Furnace Vents Bug Screens Installation - 2017 Thor ACE Motorhome
Hi, everyone, Aidan here at etrailer. Today, we're gonna be taking a look at and showing you how to install these RV vent screens from Ultra-Fab. This is gonna be on our 2017 Thor A.C.E. motorhome. So this is just going to cover up this vent right here and prevent bugs from getting in, building nests, and messing up stuff on the inside of your motorhome. Now, this kit comes with two of these vents and two of the little spring clips that hold them in place, because this is designed for Suburban and Dometic furnace vents that have a dual exhaust.
Roadmaster Rear Anti-Sway Bar Polyurethane Bushing Kit Installation - 2015 Thor ACE Motorhome
Hey there, Thor owners. Today on your 2015 Thor A.C.E. motorhome, we're going to be taking a look at and showing you how to install Roadmaster's rear anti-sway bar replacement bushing kit.This kit will replace your worn out and damaged bushings on your factory sway bar for your F-53 chassis. It's not only going to be a replacement for damage bushings, but it's also going to be an upgrade because you're going from the hard rubber that you used to have to the more durable and dampening resistant polyurethane bushings.They are going to be slightly larger and a little thicker to help provide more dampening than your original rubber did. In addition to the bushings, you also get a replacement shackle. As you can see here, we've installed them because we we're replacing a damaged and broken shackle that we had on our motorhome here.In addition to the bushings and shackle, you'll also receive end link hardware.
What our customers are saying:
"Quick processing, and delivery. reasonably priced very satisfied"