# 1
Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof
The boxes were delivered quickly and promptly (earlier than expected). The instructions were easy to follow. I just needed the space to lay everything out and to match the numbers to the correct items. My only issue was that the specs for my 2016 Nissan Versa Note SV asked for 144mm for the front, but in fact, it needed to be 148mm. The rear asked for 142mm, but it needed to be 144.5mm. Once I figured that out, the rest was straight forward. The crossbars are super sturdy and the rubberized top is a nice add to keep things from slipping. Thank you! I plan on installing a V-boat rack on the car rack. I can't wait to transport canoes!
Works as described! The instructions were pretty good once I deciphered the different parts that were described on the instructions. Installation wasn't bad. It took me about 2hrs. The most difficult part was making sure the anchoring kit aligned with the bars. I cut everything according per the instructions but the measurements on the instructions were off by a few millimeters. And so, i had to remove and relocate everything a few times until everything was perfectly aligned. I used the roof rack to load my kayak the other day and it held up really well! Two thumbs up!
# 2
Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4
i George from etrailer, The rack is awesome! Strong, firm hold and nice looking. When doing surveys, I put my ladders on the rack. I highly recommend this etrailer.
I put 3 stars because its a useful functional non-harmful roof rack solution for my WRX sedan. This review lost 2 stars because the rubber top pieces get damaged upon any accessory removal or install like(bike, snowboard rails etc). Additionally, these accessories also look to be weathering quickly because of build quality. Hopefully this helps your decision! Thanks
# 3
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" Long - Qty 2
The Rhino Racks Vortex Aero are solid. My first drive with them was to Brighton Utah from Riverside California. They were not only secure throughout the drive and hard winds, they were also reasonably quiet. On top I attached a Thule Force L 628 roof box and it fits perfectly. The only complaints I have are how difficult it was to install the racks to my fixed points. It took several friends, a mechanic, and two days to get everything right.
Bought and installed on my 2019 Honda Fit. I’ve driven from Chicago to Big Bend in TX and to the Black Hills in SD with a cargo box attached and have had zero issues. Installation is simple enough and are easy to take off when needed.
# 4
Yakima RoundBar Crossbars - Steel - Black - 48" Long - Qty 2
I ordered the Yakima roof rack, with the Hullyrollers for the back crossbar and the Mako saddles for the front crossbar to use with my kayak. It arrived just like they told me and I put them on my car the eveningit arrived. Got to finlly use the roof rack on June 22 to go out kayaking and it worked great. Only thing is I did not know about the air reflector piece for the front crossbar. Now I will be ordering it to help with the wind noise.
Great rack, go on fast, easy to install and work well on my VW TDI wagon. Care has to be given and follow the instructions for the install to what type of rails you have. Works great carrying the VW luggage carrier and plan on using it to carry kayaks as well. Just have not decided what kayak rack type to get yet.
# 5
Rapid Traverse Feet for Thule Crossbars - Naked Roof - Qty 4
The whole experience was freakin awesome. * Ordered on-line, delivered when promised, all packages were in excellent condition, and all parts were accounted for - no shortages, THANK YOU! * The Thule roof rack design, quality of materials, comprehensive instructions were really impressive. Everything went together without a hitch and really looks good installed. * We plan on carrying our 12 1/2' SUP's on the roof rack when we head out to the lakes. * It saves us time as our SUP's are inflatable, however it takes a bit of time to pump them up once we get there. Now it's just loosen them up and we're ready to go. Great job etrailer, I would definitely buy more products from your organization!!
Etrailer helped me out of a jam as I could not find the Thule parts I needed. They not only had the parts but got them to me in a few days! Made my trip to Lake Placid possible! Fantastic communication and customer service.
# 6
Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet
Product arrived on time and packed very professionally. Was very satisfied with the overall quality of the product. Everything went right together and fit perfectly. I dealt with a gentlemen named George J. He was very professional and extremely helpful throughout the whole process with updates letting me know how my order was going. Very happy with the product.
Fits perfectly on by 2015 Kia Rio, and is solid as a rock.
# 7
Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 50" Long - Qty 2
This rack works perfectly on my Nissan Versa for carrying my two Perception Sound 9'6" kayaks. The Rhino-Racks look good to me. The kayaks can rest directly on the rubber pads on the rails, unlike the Yakama racks I had in the past that had bare pipe rails. Also, I expect I can buy parts to adapt this product to a different car without having to buy new towers. I am sorry there are not hooks or loops to attach bungees when carrying lumber. They are noisy in the wind, but less so when carrying the kayaks.
Thanks to etrailer, I am ready to do some serious summer exploring with my 2013 Mazda 3! Rhino Racks, Malone top box, and Kuat bike rack!
# 8
Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4
This rack works perfectly on my Nissan Versa for carrying my two Perception Sound 9'6" kayaks. The Rhino-Racks look good to me. The kayaks can rest directly on the rubber pads on the rails, unlike the Yakama racks I had in the past that had bare pipe rails. Also, I expect I can buy parts to adapt this product to a different car without having to buy new towers. I am sorry there are not hooks or loops to attach bungees when carrying lumber. They are noisy in the wind, but less so when carrying the kayaks.
Thanks to Etrailer, I am ready to do some serious summer exploring with my 2013 Mazda 3! Rhino Racks, Malone top box, and Kuat bike rack!
# 9
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2
Jeep wangler 2024 4xe with skyone touch top .Amazing the setup for my fishing kayak 12 feet. Everyone was looking at my setup on the road , and it was secure. Big thx to Kurt w & Paul B to recomand this kayak setup 10/10 www.Etrailer.
The Rhino Racks work as intended for my bike rack above the bed of my Maverick pickup. Very secure and easy to assemble.
# 10
Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4
I have been very happy with the roof rack system.
The Inno foot pack was a good fit for my vehicle and accepted my old Thule square bars.
# 11
Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 2
Component parts of the Rhino Rack. Everything works well!
We had the challenge of how to carry 2 kayaks this summer in addition to hauling a 30 foot gooseneck horse trailer. We have F450 crew cab with custom truck bed. We hoped to use the "head ache" bar on the truck bed to support the rear sets of Swagman Rincon supports and purchased a single Rhino Vortex bar for the forward sets on top of the cab. We have 10.5 and 12 foot kayaks and this looks to be an excellent solution. The kayaks are clear of the gooseneck trailer even in a "jackknife" position. Please note the truck bed is extra long therefore there is plenty of room forward the nose of the trailer. We have not hauled yet but will convey any issues if there are any. eTrailer tech support was excellent. Product shipped as projected. Installation took approximatly 3 hours.
# 12
Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet
I have two standup paddle boards that literally live in the racks, and have since day one. The racks are awesome.
I have two standup paddle boards that literally live in the racks, and have since day one. The racks are awesome.
# 13
Inno Square Crossbars - Steel - Black - 50" Long - Qty 2
Ordered a full (naked) roof rack package with snowboard/ski attachment. Items arrived as described. Set-up was simple and flawless. Instructions are fairly clear & simple. A paper tape measure is included. No issues with fitment.Purchased the fairing to reduce wind noise and it works perfect! No excessive wind noise whatsoever -- can open sunroof comfortably if I wanted to. Have not yet put my snowboards inthe attachment yet, but do not foresee any issues. Roof rack is on a 2015 Infiniti Q40 (G37 sedan 2009-2015).
Incredible engineering: does not feel like an aftermarket rack. Easy to take off if necessary. Solid; highly recommend.
# 14
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2
# 15
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2
Exactly what I need, and good Track information. Thank you!
Excellent customer service, decently quick delivery, and the only store that I've found on the entire internet that sells these clips. Last company let me purchase them, then told me a week later they were out of stock, so it was nice to get these in the mail from etrailer as ordered!
# 16
Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver - 65" Long - Qty 2
We have been very happy with our Rhino Rack system atop our 2018 Chevy Express Van. We carry 2 Kayaks ( sit in style, 14 ft and 12 ft) upside down on the van roof and use some eye bolts and ladder supports with ratchet straps to hold them in place. It took a while to get them( due to being out of stock) but eTrailer has excellent customer service and kept in touch with us on the order status until they arrived.
Crossbars are true and straight. Work perfect for my application. Reliable product. Mounted solar panels to them.
# 17
Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver - 54" Long - Qty 2
These are the perfect racks for a low profile mounting of solar panels on my Sprinter van.
This works great. Very strong and reliable. Holds my ladders with ease. I’ve had it loaded down and done 80mph on the highway no problem.
# 18
Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver - 59" Long - Qty 2
Excellent customer service. First set of crossbars was delivered to the wrong address and a second set was mailed out to us arriving in a week.
Fit perfectly and we're very happy with the roof rack.
Fit Test: Inno Aero Flush Roof Rack for Naked Roofs on a 2016 Nissan Versa
Today on our 2016 Nissan Versa, we'll be doing a test fit on the Inno Aero Roof Rack System and using part numbers INXB93-100 for our crossbars, part number INXS200 for the flush feet, and part number INK608 for the custom fit kit. As you saw, we've already got the front one installed. Let's go ahead and do the rear one together. Let's start by grabbing our flush foot here. Then we're going to grab our pad. We need to make sure that this goes on the proper way.
Will the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs Fit Your 2016 Nissan Versa?
Today on our 2016 Nissan Versa we'll be doing a test fit on the Rhino Rack Vortex Aero roof rack system using part numbers RRVA118B-2 for the aero crossbars and part number RRRLKVA for the leg kit and part number DK232 for the custom fit kit for our Versa. To begin our test fit you'll notice that we've already got the front one installed. We're going to do the rear one together. Let's go ahead and start by grabbing our leg, okay Then we'll grab our pad. Now on the bottom here you'll notice that it's got this raised portion here. We want to make sure that this facing inward as you see it here.
Install: Yakima RidgeLine Roof Rack for Flush Rails on a 2014 Nissan Versa
Today on our 2014 Nissan Versa, we're going to be doing a test fit on the Yakima JetStream crossbar roof rack system. It uses the baseline towers. This is going to allow you to carry roof mount accessories on your Versa. Things like bike racks, kayak carriers, cargo boxes, and more.You'll notice how these bars are aerodynamic. These are going to be a lot quieter than your traditional round or square bars.Now, they're going to work with your standard clamp-on accessories. They'll also work with t-slot accessories.
Fit Test: Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs on a 2012 Nissan Versa
Speaker 1: Today on our 2012 Nissan Versa, we're going to be test fitting the Rhino-Rack Vortex Aero Roof Rack System. This is going to consist of part numbers RRVA118B-2. This is going to be the Vortex Aero Crossbars that you see here. These are 46" long. These also come in silver, part number RRVA118S-2. Holding those in place we have the 2500 Series Legs.
Setting up the Yakima RidgeLine Roof Rack for Flush Rails on your 2012 Nissan Versa
Today on our 2012 Nissan Versa, well be test fitting the Yakima Roof Rack System. Well be using their 48-inch crossbars, part number Y00408, the Yakima Q Towers, part number Y00124, and fit kits, part number Y00731 and Y00634. We already have the crossbar assemblies put together according to the instructions so now were ready to mount it up on top of our vehicle. Well take the front crossbar assembly and set it up on top of our roof. To position in properly, well need to measure 15 inches from the edge of our windshield to the leading edge of the Q Tower on both the passenger and drivers side in the vehicle. Once we have our front crossbar assembly positioned on our roof, we can go ahead and start tightening it down.
What our customers are saying:
"Excellent service and communication. Expect part to be excellent too!"