Best Mazda MX-5 Miata Bike Racks

The quality of the bike rack was excellent, but I was unable to use it because I couldn't open and close my trunk (Honda Accord 2012) when the bike rack was closed. It may have worked if I had a different trailer hitch, but I didn't want to spend the extra money on a new trailer hitch. Unfortunately, I will need to return the bike rack.

I was looking for a light weight bike rack for my 2015 Honda Accord. Your videos stated that the Kuat Beta was light and easy to install. You were right. I opened the box, read the instructions, and had it installed in about 10 minutes. I don't use a rack lock. It is so easy to pop on and off the hitch that I keep the rack in my car trunk.

I like the bike rack; but the rack seems to be made more for bikes with cross bars; my wife's bike does not have one and its a challenge loading her bike securely to the straps on the rack. I also wish there was a quick disconnect of the rack from the hitch. The rack comes with a threaded bolt, nut and cotter pin. I also purchased the security lock that locks onto the threaded bolt. However I don't keep my rack on the car all the time. When I reach my destination by car I take the rack off and lock it into my trunk. Threading and unthreading the bolt is time consuming; A quick discount to and from the hitch would be ideal for those times I lock the rack in my trunk; which is most of the time.

Once I watched the Setup Video provided by etrailer.com I was confident in my purchase. Upon receiving my bike rack I spent a few minutes reading the manual and then went out to my garage to install it. It took minutes. After reading the manual I realized that I would require "straps" to keep the front tire in place during transportation. Overall I am happy with my purchase and quick delivery.

Seems like a good rack for the price, especially when compared to others with the same weight rating. It was very easy to assemble, just a few bolts and that's it. I put two 62lb e-bikes on it (Ride1Up Turris) and it has minimal wobble and movement as expected. The straps that come on the center cradles were too short to go around our bike's frame and battery so I had to purchase a separate set of long straps from Saris for an additional $20. So be aware if you have an e-bike with a fat frame where you plan to use the cradle on, you might have to spend another $20 on a pair of long straps. While I waited for the straps I just used a velcro-strap and it worked fine. So far I am content with this rack overall and hope it lasts many years.. I gave it 4 stars instead of 5 because I had to purchase additional straps to make it work.

I had to put my electric bikes into this rack, backwards, to make them fit. Not ideal, but it works.The receiving 'trays' that are intended to provide support for holding the bikes, by being placed under the bike tires, are forced to be moved to a location that is not directly under the bottom of the bike tires. While it works in this manner, it is not ideal.For the support that attaches to the diagonal bike frame, we had to remove it from the vertical rail of the rack. We reinstalled it, upside down, because that's the only way we could make it fit, or 'grab', the bike frame. Again, we made it work, but it's not ideal. We chose to keep the rack because it was so much less expensive than the Thule rack we considered buying. The bike shop owner didn't agree with us. He observed that we are putting $3000 worth of bikes on the rack and risking that investment. So far, no problems, other than the ill-fitting installation.

Works for my fat tire bike. Once it's set up, it's easy to install and remove. I had to cut out some of the plastic cladding on the underside of my bumper on my 2014 Subaru Outback. Good value. I've had no issues.

GI love the Rack, it is easy for me to handle, (as a 89 yearold rider.), two bikes ride and fit very nicely. Like how it folds down,and how it folds to open the tailgate . Great quality for the money, I would highly recommend this rack

The Thule Passage Trunk Bike Rake for 2 bikes is a good product. I used it to transport my mountain e-bike. I choose this particular unit because it can handle the weight 2 of bikes (non-e-bikes) and the weight of my e-bike is equivalent to weight of 2 bikes. Note: Must readjust the straps after mounting the bike to the rake.

great! works really well, and a lot easier to attach than I anticipated. We drove with bikes across the country from south west all the way to North east. solid rack!

The Komodo was the perfect solution for carrying my road bike on the trunk lid on my old BMW Z3 Roadster. I also purchased the front wheel Hogg and or works beautifully. Seasucker's Komodo Is a very high quality product that looks like a piece of art. I'm likely to get more compliments on the Komodo rack than my bike or car!

Good product. However, the one I ordered was supposed to fit the aero cross bars on 2018 Subaru roof racks and it doesn't. In fact the fit is very sloppy and looks unsafe. Sending mine back if they can't find a clamp that fullly contacts all surfaces.

Fits my whispbar crossbars (a lot cheaper than the whispbar-specific rack) and is pretty simple and straightforward to use. I've owned a couple of other universal sort of racks (fit lots of bikes, fit lots of crossbars) and this one is a good one both in terms of simple initial installation on your vehicle and also simple loading/unloading of bike.

I installed this rack onto a Curt trailer hitch which is mounted onto a 2017 Honda Fit. I have been using it intermittently for several months, probably about 5 times with one bike and twice with two bikes. I give some pros and cons below and then elaborate. Pros: easy to assemble, easy to mount and dismount bikes, easy to lock and unlock, how to put the rack into different positions is intuitive Cons: inconvenient to put the rack into different positions, inconvenient to mount the rack onto the hitch, rack protrudes about 15 inches from bumper when in flipped up position (seems very vulnerable to someone backing into it in a parking lot, very inelegant looking I say the repositioning is intuitive because there is really only one way you could possibly place the pins for each position. But removing and replacing two pins is much less convenient than turning a knob or a lever, like some racks do. Also many racks fold and flip in such a way as to look very unobtrusive when in non-use mode. This one looks like kind of a monstrosity. That does not really bother me but it might bother some owners. The part that does bother me is how far it protrudes from the car. I back into parking spaces whenever possible to avoid someone bumping into the rack and damaging it (which happened to a friend). My number one suggestion for Curt is related to mounting the rack onto the hitch. Make it easier to tell when the holes are lined up so that the bolt/pin will fit and thread. As it is now, if you insert the rack as far as it can go it is way too far in. Ideally, it would be exactly lined up. Failing that, maybe some kind of click or other feedback to know at least that you are in the neighborhood. It would also be great to have an attaching device that is easier to fasten and unfasten than is the bolt/pin. Tip for mounting the rack onto the hitch: I assumed that it would be awkward to hold, what is it 46 pounds?, while trying to line up the rack probe with the receiver. If you have a garage with exposed collar ties, my solution could work well for you. I looped a cargo strap over a collar tie. Then I hooked both hooks of a bungie onto that loop. The idea is that you hook one of the bike frame holders of the rack onto the bungie, suspending the rack a few inches off the garage floor. This takes most of the weight of the rack so that you can just pull up or down and forward until you line up with the receiver. Tip for mounting bikes. Don't put the little screw into the post that prevents you from completely removing the bike frame holders. Remove both holders. Position the first bike, slide the holder into place, position the second bike, slide the holder into place. I found this makes it much easier, because you avoid parts of the bike hitting the holder as you are trying to get the wheels into place. The trick is that if you are mounting only one bike, don't forget to put the second holder back on - or maybe just stick it inside the car right away.

Have used mine several times in the past 2 years on the back of a ‘21 Honda Pilot and a ‘19 Ram 1500 Classic. I really like that the platform will tilt downward allowing the Pilot rear hatch to open with no interference. The tailgate on the Ram doesnt open fully even with the platform tilted downward, but that is a Ram problem & not a Curt problem. Was well worth the money.

This rack has worked out perfect. IT holds 2 bikes with ease yet folds into a fairly flat package when not in use against the back of my vehicle. It is light weight yet very sturdy and well built. I have had strap on bike racks that worked but this one is much easier to load and unload our bikes. The only con is if you don't have a hitch mount you will need one but that allows you to get other accessories like the luggage rack I also purchased from them which frees up space in the inside of my small car. If your on the fence it came well packaged and fast. I did allot of research and this rack gets 5 stars all the way.

Nice customer service and good product.

So far really great! I love the stability my bike has on the rack, fit for my 2021 Honda Civic, and the quality of the material engineered into the design to prevent damage to the cars paint/parts.

Works great even using an electric bike like my Aventon Soltera.

My husband and I are in our 60's and had no problem putting this together as per instructions. It's a good solid rack, no wobble even with my big 35 pound 29'er. It easily clears our steep curb on the back of our Subaru Outback. The hatch clears the bike and there's plenty of room to move between the car and bike in that tilt position. We loaded our car for vacation with the bike on the rack. It's a bonus to be able to leave it all on the car in our garage. We also bought the Drawtite 2" hitch from etrailer.com. We're very happy with this setup!

I've had no issues with this bike rack. My bike weighs approximately. 35 lbs and I've taken it several 300 - 400 mile journeys using this bike rack. This bike rack is very easy to assemble, install / remove from the car, and secure the bike for travel.

The rack arrived very quickly. Upon opening the box I observed that the covers for the suction pads had come loose during shipping. Probably not an issue. The instructions for assembly and mounting were clear and easy to follow. I planned to secure the cups to the glass roof on my VW. So, I thought it would be best to clean the glass and roof with auto detailing spray. After doing that I attached the carrier and gave it a prett y good shake. I have attached three photographs that may add clarity. I'm very optimistic. This may be the best carrier I've had for my bicycle. Keep Eager.

I received delivery and setup. I seem to be able to connect my road bike wheel with quick release - but not my road disc bike with thru-axle. Do I need an accessory for thru axle bike?