# 1
Swagman XTC2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
I was sent additional mounting materials that don't correspond with my hitch or my bike rack. See the photo below. Are these materials for my Swagman STC2 Bike Rack Item #S64670?
Very stable and simple to use bike rack that works great with my road bike AND with my 29" Big Rippers. It makes loading and unloading the bikes a snap and they are safe and secure for traveling once loaded and secured. I have already logged over a thousand miles hauling bicycles with this rack and highly recommend it. I am a big fan of Yakima roof racks but, honestly, wish I would have went with this setup for my bikes from the beginning.
# 2
Kuat NV 2.0 Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount - Gunmetal Gray
Fantastic bike rack. Switch it between a Honda Ridgeline and a Subaru Outback Wilderness and it works perfectly. Accidentally lost the locking pin that secures the rack to the trailer hitch and when I inquired with Kurt about ordering a replacement lock keyed to match the locking cables on the rack and the Kuat rep sent one to me for free. (I removed the rack and left the lock sitting on my car bumper. Later that day I drove off and lost the lock on the highway).
Great bike rack. It is easy to install the hitch on a vehicle and to remove it. The Kuat NV 2.0 provides a smooth, gentle ride for road bikes and mountain bikes. Great purchase. Highly recommend.
# 3
Thule Passage Trunk Bike Rack for 2 Bikes - Hanging Style
Pontiac Trans Sport VanThe Thule Passage Trunk Bike Rake for 2 bikes is a good product. I used it to transport my mountain e-bike. I choose this particular unit because it can handle the weight 2 of bikes (non-e-bikes) and the weight of my e-bike is equivalent to weight of 2 bikes. Note: Must readjust the straps after mounting the bike to the rake.
great! works really well, and a lot easier to attach than I anticipated. We drove with bikes across the country from south west all the way to North east. solid rack!
# 4
Yakima RidgeBack Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Tilting
Heavy duty. Well made and designed. Easy to install and load. Just arrived so I’ll let you know about the durability.
Great rack! Fits the receiver on my '22 Outback perfectly. My bike(s) ride stable and secure. I also have a Specialized e-bike that weighs 36 lbs., and the rack handles the weight just fine.
# 5
Yakima FullBack 3 Bike Rack - Trunk Mount - Adjustable Arms
Performed perfectly on a 140 mile round-trip in my 2017 Acura MDX. It took me a few tries to position the anchors inside the top of the hatch, but I got the hang of it and the rack did not shift at all while driving 50-60 mph on the highway.
This product is steady, but heavy and I'm not sure it's good for RAV4 2024. I used it one time with 3 bicycles, and the lower touching part made the trunk door dented because of the pressure.
# 6
Saris Bones 2 Bike Rack - Trunk Mount - Adjustable Arms
So far really great! I love the stability my bike has on the rack, fit for my 2021 Honda Civic, and the quality of the material engineered into the design to prevent damage to the cars paint/parts.
Works great even using an electric bike like my Aventon Soltera.
# 7
Swagman Chinook Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
Works for my fat tire bike. Once it's set up, it's easy to install and remove. I had to cut out some of the plastic cladding on the underside of my bumper on my 2014 Subaru Outback. Good value. I've had no issues.
GI love the Rack, it is easy for me to handle, (as a 89 yearold rider.), two bikes ride and fit very nicely. Like how it folds down,and how it folds to open the tailgate . Great quality for the money, I would highly recommend this rack
# 8
Yakima FullBack 2 Bike Rack - Trunk Mount - Adjustable Arms
First rack I've ever purchased I misplaced the end bar used to lock the bikes onto the rack. Can I buy another one?
Audi SQ5Loving my bike rack it looks really stylish on my SQ5. It’s super easy to install, I don’t even need any help, so win win. It’s also sturdy, I have travelled multiple times from ATL to FL without any issues. The only problem is the bottom bar has a hard plastic, which rubs at the bottom of my hatch below the plate. I fixed this by cutting a pool noodle to protect my car by adding it to the bottom over the hard plastic. And added rubber stoppers under the top straps to stop shafting on the trunk spoiler. All and all good buy!
# 9
Swagman Trailhead Bike Rack for 3 Bikes - 1-1/4" and 2" Hitches - Tilting
My previous bike rack was a hitch mounted Yakima. It was sturdy but not well suited for my low Subaru Impreza. It stuck out too far and hung too low so that I had to inch my way down the driveway or over speed bumps for fear of it bottoming out. A roof rack or a rear window mounted rack was not suitable since I wanted to be able to also carry two kayaks. First, I tried to modify my rack by shortening the part that sticks out of the hitch. I tried to saw off about 6 inches so it wouldn't stick out so far but the steel was much too hard. I ended up ruining several metal-cutting blades on my power saw before I gave up. I looked for other rack options. There weren't many out there. But eventually, I found something that met my needs. I purchased the "Swagman Trailhead 3 Bike Fold Down Bicycle Hitch Rack" in 2013 from eTrailer.com. The part that enters the hitch curves up to increase clearance from the ground. It is sturdy and sticks out far enough so I can still open my trunk hatch without having to lower the main vertical bar on the hitch (though I could if I wanted to). It isn't often I am really excited about a piece of gear but this hitch rack has made me worry-free when I transport my bicycle(s) via car. The only thing I don't like is that it is advertised as being a 3 bike carrier but it only fits 2 hybrid bikes. Maybe it will fit 3 skinny racing bikes but for the average rider, don't expect to fit on more than 2. But my experience is that is the case for all bicycle racks.
Nice heavy duty rack. Putting it together is quite simple if you read the instructions. I like the ability to use both a 2" or 1 1/4" receiver. etrailer is very easy to deal with.
# 10
Swagman XC2 Bike Rack for 2 bikes - 1-1/4" and 2" Hitches - Frame Mount
This is a well designed rack. Adding and removing bikes is quick & easy. Just set the bike on & slide the padded hook down onto the bike frame to secure it; no straps required. If only one bike is transported, it does not interfere with opening the trunk on our Tesla Model 3. With 2 bicycles the trunk cannot be opened. For 2 bikes the Swagman model that can tilt might be worth the extra 22 bucks. This rack uses a bolt in the receiver hitch instead of a pin. This locks it securely preventing it from moving in the hitch & rattling. It also requires a wrench to remove it, good for theft prevention but one more thing to keep track of. For storage on the vehicle the top bar folds down. For storage in the garage, the left & right bars fold up & you can hang it using one of the hooks.
So far so good. The rack wiggles a bit, but that is expected. I have it on my 2007 Corolla and I have hit 65+ on the highway with it and have not had a problem. I would recommend getting a locking pin. The one included is threaded, which aside from security, makes it harder to take the rack on and off. I would also look into a DIY way to secure the wheels better. I am using some bungee straps which do the job no problem. The two bikes I carry are at the racks capacity.
# 11
Curt 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Frame Mount - Tilting
I installed this rack onto a Curt trailer hitch which is mounted onto a 2017 Honda Fit. I have been using it intermittently for several months, probably about 5 times with one bike and twice with two bikes. I give some pros and cons below and then elaborate. Pros: easy to assemble, easy to mount and dismount bikes, easy to lock and unlock, how to put the rack into different positions is intuitive Cons: inconvenient to put the rack into different positions, inconvenient to mount the rack onto the hitch, rack protrudes about 15 inches from bumper when in flipped up position (seems very vulnerable to someone backing into it in a parking lot, very inelegant looking I say the repositioning is intuitive because there is really only one way you could possibly place the pins for each position. But removing and replacing two pins is much less convenient than turning a knob or a lever, like some racks do. Also many racks fold and flip in such a way as to look very unobtrusive when in non-use mode. This one looks like kind of a monstrosity. That does not really bother me but it might bother some owners. The part that does bother me is how far it protrudes from the car. I back into parking spaces whenever possible to avoid someone bumping into the rack and damaging it (which happened to a friend). My number one suggestion for Curt is related to mounting the rack onto the hitch. Make it easier to tell when the holes are lined up so that the bolt/pin will fit and thread. As it is now, if you insert the rack as far as it can go it is way too far in. Ideally, it would be exactly lined up. Failing that, maybe some kind of click or other feedback to know at least that you are in the neighborhood. It would also be great to have an attaching device that is easier to fasten and unfasten than is the bolt/pin. Tip for mounting the rack onto the hitch: I assumed that it would be awkward to hold, what is it 46 pounds?, while trying to line up the rack probe with the receiver. If you have a garage with exposed collar ties, my solution could work well for you. I looped a cargo strap over a collar tie. Then I hooked both hooks of a bungie onto that loop. The idea is that you hook one of the bike frame holders of the rack onto the bungie, suspending the rack a few inches off the garage floor. This takes most of the weight of the rack so that you can just pull up or down and forward until you line up with the receiver. Tip for mounting bikes. Don't put the little screw into the post that prevents you from completely removing the bike frame holders. Remove both holders. Position the first bike, slide the holder into place, position the second bike, slide the holder into place. I found this makes it much easier, because you avoid parts of the bike hitting the holder as you are trying to get the wheels into place. The trick is that if you are mounting only one bike, don't forget to put the second holder back on - or maybe just stick it inside the car right away.
Have used mine several times in the past 2 years on the back of a ‘21 Honda Pilot and a ‘19 Ram 1500 Classic. I really like that the platform will tilt downward allowing the Pilot rear hatch to open with no interference. The tailgate on the Ram doesnt open fully even with the platform tilted downward, but that is a Ram problem & not a Curt problem. Was well worth the money.
# 12
Kuat Sherpa 2.0 Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount - Gray
We love this bike rack for its ease of use and solid construction. Bikes are quick and easy to load in and lock down tight. The hitch-receiver tightening system works great for a wobble-free rack and the hinge and locking lever work smooth and solid. It looks nice too.
So after much research into bike racks, I decided on pulling the plug on the Kuat Sherpa 2.0. I've looked into the Kuat NV and other brands, but they were just too much for my needs. If you've got "regular" bikes and not the heavier eBikes, then this rack is perfect. I wanted a hitch rack that was user friendly and not overly complicated. I have a mixed bag of bikes and this rack can handle them all, from mountain bikes, street bikes, and BMX bikes. I like that this rack comes with an adapter piece for 20"-24" wheels. Assembly of the Kuat Sherpa 2.0 is really a no-brainer. I think it's only 4-5 bolts really. Everything else is ready to go. The anti-rattle hitch ball mechanism is simple to use with just a twist of the dial, easy. The tilt pedal/lever is also easy to access should you need to open your hatch, a solid "click" assures it's in place. So far, loving this rack. Fit and finish is superb. Thanks to Jerred and etrailer for answering my questions, always helpful.
# 13
Yakima HoldUp Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount
Extremely well made hitch rack. Fantastic service from etrailer.com
Works well for transporting two 29" wheeled mountain bikes. However, after one year it's starting to rust in several areas (see attached photos), and the front wheel arms are becoming increasingly difficult to raise and lower. Finally the locking cable is extremely rusty as you can see in the attached photo. I'm not sure how durable this rack will be long term.
How to Install the Saris SuperClamp EX Bike Rack for 2 Bikes on a 2023 Mazda CX-5
Hey everyone, it's Evangeline here at etrailer. And today we have the Saris SuperClamp EX two-bike platform rack. We're gonna take a look at how it fits our 2023 Mazda CX5. The SuperClamp is gonna be a dual wheel mount rack, that holds your bike by the wheels, so zero frame contact. You have a heavy weight capacity for those heavier electric bikes. And it's gonna be a very compact rack.
Is the Yakima FullTilt Bike Rack for 5 Bikes Compatible with the 2023 Mazda CX-5?
Hey everyone, it is Evangeline here at etrailer. And today we have the Yakima FullTilt Five hanging bike rack. We're gonna take a look at how it fits our 2023 Mazda CX-Five. I usually am not a big fan of hanging racks. But if I had to get one because it's more compact and I wanted the ability to carry around a lot of bikes without taking up a lot of space, this is what I would go with. This is gonna be a very premium bike rack with premium features that make it a little bit easier to deal with having a hanging rack.
Fit Test: Swagman XTC2 TILT Bike Rack for 2 Bikes with 2023 Mazda CX-5
Hey everyone, it's Evangeline here at etrailer and today we have the Swagman XTC2 Tilt bike rack and we're gonna take a look at how it fits on our 2023 Mazda CX-5. So the XTC2 is gonna be a very simple bike rack that has tilting feature. If you like the Swagman XC2 and you like the no frills, don't have to pay extra for features that you may not need, this is going to be the upgrade to that. So it is for people that like an entry level bike rack where you get some features without having to pay too much. Now focusing on the Mazda CX-5 this is gonna be a very compact rack. That means you don't have to take up a lot of space behind your vehicle, but it still has some features there.
2023 Mazda CX-5 Thule Hitching Post Pro Bike Rack for 4 Bikes: Complete Installation
Hi, John with etrailer. Hey, today we're taking a look at the Thule Hitching Post Pro Bike Rack on our 2023 Mazda CX-5. Now, let's take a closer look at the bike rack here. Thule is one of the leaders in bike racks, and this is a really nice entry level option that they have here. This is great for some people that, if you're just gonna throw it on a couple times a month or something like that, this is really good for you. You're not gonna get four bikes into the back of your Mazda like this, let's be honest.
Setting up the Swagman XC2 Bike Rack for 2 bikes on your 2023 Mazda CX-5
Hi, John with etrailer. Hey, if you're ready to hit the trails, but you wanna keep the inside of your Mazda clean, check out this 2-bike rack carrier from Swagman. This is the Swagman XC2 on our 2023 Mazda CX-5. So we can take a closer look at the carrier here. Now, this is gonna be an entry level carrier as far as a platform-style goes, that's the ones, the platform-style, is where it's being supported by the tires here and we just clamp down. Look, there's a lot of features on higher end platform-style bikes and they might be right for you.
Yakima OnRamp E-Bike Platform Rack with Ramp Review - 2021 Mazda CX-5
Hey, it's Ethan here at etrailer. Today we're going to be taking a look at the Yakima OnRamp hitch bike rack and how it fits on our 2021 Mazda CX5. So the OnRamp is going to be unique for a couple of different reasons. One, including the integrated ramp as well as its weight capacity that supports e-bikes. So let's check out a little bit more about how it fits on this vehicle. The OnRamp is a two-bike platform style bike rack capable of supporting up to 66 pounds.
Installation Guide for the RockyMounts GuideRail Bike Rack for 2 Bikes on a 2021 Mazda CX-5
Hey, it's Ethan here at etrailer. Today, we're gonna be taking a look at the RockyMounts GuideRail Hitch Bike Rack and how it fits on our 2021 Mazda CX-5. It is a 2-bike platform style bike rack, capable of supporting two bikes up to 60 pounds each. It's going to hold onto our bikes using this dual wheel mount design, one hoop on either side on either tire, so there's no frame contact in the event that you wanna mix and match this with carbon frame bikes or you have an alternative frame bike with a really aggressive style, maybe just have a nice paint job that you don't want being damaged, this is a great way to get them where they need to go. Let's check out how it works. One really nice feature that I like about this rack is that to tilt it down, which we can do with the bike loaded up, we just have to reach this handle right here at the front, super close and really easy to do, so even if I had another bike loaded up in the front, I could, and there's a little bit of resistance on the way down, so it's not just gonna drop on me all of a sudden.
Does the Kuat Transfer V2 Bike Rack for 2 Bikes Suit Your 2021 Mazda CX-5
Hey, it's Ethan here at etrailer. Today we're going to be taking a look at the Kuat Transfer V2 Hitch Bike Rack and how it fits on our 2021 Mazda CX-5. The Kuat Transfer is a two-bike platform style bike rack capable of supporting two bikes up to 40 pounds a piece, going to hold onto our bikes primarily with these front wheel hooks and one additional strap down at the back. So if you wanna mix and match, use this with your carbon frame bikes, you can. And if you want to use alternative frame bikes, it shouldn't be a big deal for that either. One of the nice features that this rack offers is this unique goalpost design.
Fit Test: Hollywood Racks Destination Bike Rack for 2 Bikes with 2021 Mazda CX-5
Hey, it's Ethan here at etrailer. Today we're going to be taking a look at the Hollywood Racks Destination hitch bike rack and how it fits on our 2021 Mazda CX-5. This is going to be a two bike platform style bike rack capable of supporting two bikes up to 35 pounds. It's gonna be a pretty entry level bike rack, so it doesn't have a ton of features. We'll get into it and see how it works. The first thing I will point out is that the rack does not have the ability to tilt away with the bike loaded up.
Fit Verified: Saris SuperClamp EX Bike Rack for 2 Bikes on a 2021 Mazda CX-5
Hey, it's Ethan here at etrailer. Today, we're going to be taking a look at the Saris SuperClamp EX hitch bike rack, and how it fits on our 2021 Mazda CX-5. It is a two-bike, platform-style bike rack, capable of supporting two bikes up to 60 pounds. It's going to hold onto our bike in a pretty unique fashion as it does have two wheel hooks, one on the front, one on the back, as well as one strap for either of those tires well. So you get a really sturdy hold, and you can transport pretty much any bike you can imagine, whether it's carbon frame, or alternative frame style bikes. Anything you want will fit on this rack as long as it's within the wheel base that will get to in just a little bit.
Fit Check: Testing RockyMounts MonoRail Bike Rack for 2 Bikes on a 2021 Mazda CX-5
Hey, it's Ethan here at etrailer. Today we're gonna be taking a look at the Rocky Mounts MonoRail hitch bike rack, and how it fits on our 2021 Mazda CX5. The MonoRail is a two-bike platform style bike rack, capable of supporting two bikes up to 60 pounds. Holding onto our bikes primarily with this front wheel hook here, and one strap down here at the bottom. So if you want to use this rack with your carbon frame bikes, you can. There's not gonna damage the frame.
Fit Check: Kuat Piston Pro X Bike Rack for 2 Bikes on a 2021 Mazda CX-5
Hey, it's Ethan here at etrailer. Today we're gonna be taking a look at the Kuat Piston Pro Hitch Bike rack and how it fits on our 2021 Mazda CX-5. We're just gonna be focusing on the specific fit for this vehicle. So if you want a more in-depth look at the rack feel free to check out the product review or the product page here at etrailer.com. But the Piston Pro is a really premium option that's going to get a bike, or two bikes rather, up to 67 pounds each, where you need 'em to go. It's a platform style bike rack and it's gonna hold our bikes with this dual wheel mount design, so there's no frame contact at all.
Test Fit: Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes on a 2021 Mazda CX-5
Hey, it's Ethan here at etrailer. Today we're gonna be taking a look at the Hollywood Rack Sport Rider SE Hitch Bike Rack. How it fits on our 2021 Mazda CX-5. We're going to be focusing specifically on how the rack works with this vehicle. So if there's anything in depth that you wanna check out more about the rack. feel free to watch the full review or the product page here at etrailer.com.
How Does the Hollywood Racks Destination E Bike Rack for 2 Electric Bikes Fit on a 2021 Mazda CX-5?
Hey, it's Ethan here at etrailer. Today we're gonna be taking a look at the Hollywood Racks Destination E hitch bike rack and how it fits on our 2021 Mazda CX5. The Destination E is gonna be really useful for those e-bike purposes. It's also rated for your motor home if you want to use it in that way as well. It's a two-bike platform style bike rack capable of supporting two bikes up to 70 pounds. It's going to hold onto our bike primarily with this padded frame hook or frame clamp here as well as three straps, one on the back, two on the front.
Will the Kuat Sherpa 2.0 Bike Rack for 2 Bikes Fit Your 2021 Mazda CX-5?
Hey, everybody, welcome to etrailer.com. I'm Bobby and today we're taking a look at the Kuat Sherpa 2.0, here, on our 2021 Mazda CX-5. So this is gonna be a very nice way of getting your bikes to your destination. Now, obviously Kuat, always concerned about that style. We do have it here in the gunmetal gray. You guys can see, we have some copper, orange accents throughout; if you're not quite liking the color, it does come in pearl and black as well.
How to Install the Swagman XC2 Bike Rack for 2 bikes on a 2021 Mazda CX-5
Hey everybody. Welcome to etrailer.com, I'm Bobby. Today we're taking a look at the Swagman XC2, here at the back of our 2021 Mazda CX-5. So this is gonna be a very decent way guys, of just carrying your bike. So, it's not the most expensive, nor is it the most premium option out there. But it is just a tried and true, decent way of getting your bikes wherever you wanna go.
Yakima OnRamp E-Bike Platform Rack with Ramp Review - 2020 Mazda CX-5
Hey, everybody, Ryan here at etrailer. Today, on our 2020 Mazda CX-5, we're gonna be checking out the Yakima OnRamp Platform Style Bike Rack. First impressions of the rack on the back of the Mazda, I think it's a decent fit, you know, it's relatively compact and which is good for a smaller SUV. You don't have a gigantic bike rack back here. And really, this is gonna be set up for e-bikes, so really heavy bikes and that's because it does have a ramp, a little tray that you can put on here and help get the bike on, or take it off. But that doesn't mean that you can't use it with regular-style bikes as well, so even if you just have a hard time or have a real heavy bike like this one here, it makes life a little bit easier which we'll get to in just a second.
How to Install the Curt 2 Bike Platform Rack on a 2020 Mazda CX-5
Hi there, CX-5 owners. Your 2020 Mazda CX-5. We're gonna be taking a look at Curt's two bike platform rack. And this is what our rack looks like here at the back of the vehicle. You can see it is a double platform style which will secure your bike very tightly to the vehicle. Unlike the hanging style rack where your bike could potentially rock back and forth and contact the other bikes and your steering wheel up here at the front, the handlebar can rotate around With this, it's locked down into the platform.
etrailer Tilting 4 Bike Rack Review - 2020 Mazda CX-5
Andy here with etrailer.com. And today we're gonna take a look at the etrailer 4 bike rack on our 2020 Mazda CX-5. If you're looking for a straightforward, nothing too crazy, very simple bike rack just to get your friends or family's bikes to the trails, to the park, or even on a trip, this would probably be the better option for you. As you can see with this hanging style bike rack, it will hold up to 4 bikes. We use hook and loop straps here on each cradle that are rubber lined as well. And to load and unload, you would just simply unstrap the front and the side one as well, and then remove your bike from there.
Installing the Hollywood Racks Destination Bike Rack for 2 Bikes on your 2020 Mazda CX-5
Andy: Hello everyone. Andy here with etrailer.com and today we're going to take a look at the Hollywood Racks Destination 2 Bike Rack on our 2020 Mazda CX-5. If you're looking for a bike rack to install that's going to be easy and lightweight, maybe something that you can do by yourself, this would probably be one of the better options. Taking a look at the simplicity of this design as well, there's only three contact points to hold your bike secure. With that being said, having this 360 movable frame mount point you'll have different options for different style of bikes. With only having those three contact points that are holding the bikes secure, let's go ahead and take it off now and I'll show you that.I like to take off the front and rear wheels first.
Will the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes Fit Your 2020 Mazda CX-5?
Evangeline: Hi, it's Evangeline from etrailer.com, and today we are looking at the Hollywood Racks Sport Rider SE2 bike platform style rack here on our 2020 Mazda CX-5. This is a great option, especially if you have a heavy e-bike, because it has an 80 pound weight capacity, which is a lot.So the first thing I want to show you is how it tilts away with the bike on it. To do so you need to take out this pin and clip here. So with that clip out of the way, you just need to pull that pin out. Now it is a tight fit, so you might need to lift the rack up a little bit while you pull that pin out. And with that out of the way, you then pull on this top lever.
Does it Fit? Testing the Kuat Sherpa 2.0 Bike Rack for 2 Bikes on a 2019 Mazda CX-5
Hi everyone. It's Evangeline here at etrailer. And today we are looking at the Kuat Sherpa 2.0 2-bike rack here on our 2019 Mazda CX 5. Now the Kuat Sherpa is one of the best bike racks in the mid range price range of bike racks. It has all of the nice important features that you would expect in a convenient bike rack, but at a reasonable price. So let's take a look at one of those features, which is that it can tilt away and to do so, you're gonna wanna lift this or pull on this lever and then just allow it to drop down within that position.
Fit Check: Kuat NV 2.0 Bike Rack for 2 Bikes on a 2019 Mazda CX-5
Hi everyone, it's Evangeline here at Etrailer and today we are looking at the Kuat NV 2.0 Two-bike Rack here on our 2019 Mazda CX-5. Now the KUAT NV is an awesome premium bike rack, especially because it has all the premium features. Plus the weight capacity that you would expect from a premium bike rack. Let's take a look at one of those features. So what you can do here is that you can tilt it away by pulling this lever and allowing it to drop down. And you'll want to do that if you want to access your hatch.
Test Fit: Kuat Transfer V2 Bike Rack for 2 Bikes on a 2019 Mazda CX-5
Hi, everyone. It's Evangeline here at etrailer. And today, we are looking at the Kat Transfer v2 2-Bike Rack, here on our 2019, Mazda CX-5. Now, the Kat Transfer is an awesome bike rack, especially when it comes to versatility and it's unique goalpost design, that makes it a lot easier to mount and dismount your bike. We'll take a look at one of its features, which is that you can tilt it away. To do so, what I like to do is just to put that arm to the side, that way I can step right in there, step on this lever and then just drop this bike rack down to a tilt.
Does the Kuat NV 2.0 Base Bike Rack for 2 Bikes Suit Your 2019 Mazda CX-5
Hi everyone, it's Evangeline here at etrailer. And today we are looking at the Kuat NV2.0 Base version here on our 2019 Mazda CX-5. Now the Kuat NV is an awesome bike rack because of how it combines all of its nice, beautiful premium features with a great design. So one of those features is that it can tilt away and to do so, you're gonna have to pull on this lever and that allows it to drop down to a tilt. And you want it to tilt away if you want to access your hatch. So as you can see here, on our Mazda, there is a lot of room between our door and our handlebars.
What our customers are saying:
"I purchased a hitch, wiring harness, bike carrier and bike adapter for a newly redesigned 2007 Hyundai Santa Fe. Everything arrived in a matter of days and either fit or worked perfectly. Great prices, quality and service support. Rest assured, I'll be recommending you to anyone who asks. Thanks again."