# 1
Thule Passage Trunk Bike Rack for 2 Bikes - Hanging Style
Pontiac Trans Sport VanThe Thule Passage Trunk Bike Rake for 2 bikes is a good product. I used it to transport my mountain e-bike. I choose this particular unit because it can handle the weight 2 of bikes (non-e-bikes) and the weight of my e-bike is equivalent to weight of 2 bikes. Note: Must readjust the straps after mounting the bike to the rake.
great! works really well, and a lot easier to attach than I anticipated. We drove with bikes across the country from south west all the way to North east. solid rack!
# 2
Thule Passage 3 Bike Carrier - Trunk Mount
Way too light duty for what is advertised. It seemed to be made out of 1/2 inch electrical conduit. I would never put three bikes on that rack. I only had two bikes on the rack. While on trip through Idaho the wind was so strong that one of the bikes partially blew off the rack. We traveled 1,800 miles and upon arriving home I actually sawed the bike rack up and threw it away so that no one else would use it and cause an accident. I've already found a different brand that is HEAVY DUTY and I will stick with that brand.
This is definitely more of a 2 bike carrier vs 3 bikes. I had to take the front wheels off two bikes to get three bikes on this carrier. Also, it rubbed the paint off on the trunk of my Subaru legacy.
# 3
Saris Bones 2 Bike Rack - Trunk Mount - Adjustable Arms
So far really great! I love the stability my bike has on the rack, fit for my 2021 Honda Civic, and the quality of the material engineered into the design to prevent damage to the cars paint/parts.
Works great even using an electric bike like my Aventon Soltera.
Saris Bones EX 3 Bike Rack Test Fit on a 2017 Mazda 3
Hi everyone. It's Evangeline here at etrailer. And today, we're looking at our Saris Bones EX 3 bike rack here on our 2017 Mazda3. So, the Saris Bones is a trunk mounted bike rack that goes on your trunk of your vehicle. So, if you do not have a hitch or you cannot install one, this might be a good option for you in order to carry around your bikes and bring them to where you need them to go. So, this can carry three bikes.
Test Fit: Yakima FullBack 2 Bike Rack on a 2015 Mazda 3
Speaker 1: Today on our 2015 Mazda3, we're going to be taking a look at the Yakima FullBack 2 Bike Rack. That's going to be part #Y02634. As you can see, we have a bike installed. Let's take a closer look and show off some of the features.Now starting from the outside and working our way in, we're going to have this integrated cable lock system, which comes out from this arm of our bike rack, wraps around our second bike we have installed, and inserts on this notch right there. You will get a set of keys with your bike rack in order to unlock the cable, thus unload your bikes.On the other arm, we're going to have a Yakima bottle opener.Our cradles are going to be stationary. However, they do have this nice rubber TPE padding, which means these little notches right here are going to act as shock absorbers for your bike frame while you're traveling to help protect it from any damage.Our bike's going to be secured at 3 points of contact.
Thule Gateway Trunk Mount Bike Rack Review - 2013 Maxda 3
Today on our 2013 Mazda 3, well be test fitting the Thule Gateway Trunk Mounted Two-Bike Rack, part number TH9006XT. Well get started by adjusting our feet out to the correct setting which is six according to the Thule website. Well take our bike rack, place it on to the trunk of the vehicle. Next, we will attach the rack to the vehicle using the appropriate hooks and straps in the correct locations. Well secure our excess straps, then well bring our dual arms out, well do this by pulling up on the grey lever.Youll move the cradle arm in just beyond the teeth, then youll lift up to a parallel position, position back over the teeth, and then close your grey lever. You will repeat this for the other cradle arms as well.
Thule Archway Trunk Mount Bike Rack Review - 2013 Maxda 3
Today on our 2013 Mazda 3, well be test fitting the Thule Archway Truck Mounted 2 Bike Rack with Adjustable Arms, part number TH9009XT. Lets get started by adjusting the fit dial to the number 6 according to the Thule website. Well grab our bike rack, place it onto the trunk of the vehicle and attach it with the appropriate hooks. Well secure the excess straps. Next, well bring out the dual arms. Youll do this by undoing the gray lever, sliding the cradle arm away from the grooves and bringing it up to a parallel position. Youll slide it back over the grooves and then tighten down the lever.
Thule Trunk Bike Racks Review - 2012 Mazda 3
Today on our 2012 Mazda 3 we're doing a test fit of a Thule Gateway XT Trunk-mount bike rack. That part number is TH9006XT. Now, we already have our bike secured down so we're first going to show you how we do that. We've got two cradles in place with three straps, two on our fame, and one is our anti-sway strap in the back. I'm going to start by pulling down and lifting up to release those. Then we'll be able to pull our bike off and set if off to the side. With that out of the way, let's start off with some measurements. First, it's going to be the overall what we're adding to our vehicle with our arms out.
Thule Trunk Bike Racks Review - 2012 Mazda 3 TH9001PRO
Today on our 2012 Mazda 3 we're doing a test fit of the Thule Raceway Pro Trunk Mount 2-Bike Rack. That part number is TH9001PRO. Now, we already have our bike secured down. I'm first going to show you how we do that. We have two cradles in place with three straps, two on our frame and one is our anti-sway strap in the back. We're just going to pull down and lift up to release those.
Fit Test: Thule Passage Trunk Bike Rack for 2 Bikes on a 2012 Mazda 3
Today on our 2012 Mazda-3 we're doing a test fit of the Thule Passage trunk mount bike rack. That part number is TH910XT. We already have our bike secured down. I'm first going to show you how we do that. We have two cradles in place, with three straps. Two on our frame and one is our anti-sway strap in the back.
Thule Raceway Trunk Bike Rack Review - 2011 Mazda 3
Today on our 2011 Mazda 3 were going to be test fitting the Thule Raceway 2 Trunk Mount Bike Carrier, part number th9001. To fit the Raceway to our vehicle we need to make sure that the fit dial is set according to what we find in the instructions. Once weve done that, we can set the trunk mount rack on top of our vehicle. The upper arm of our carrier will rest on the trunk and the lower arm of our carrier should be positioned on the upper tier of our rear bumper. Well place the hooks on the top at the trunk gap right by the rear windshield. Then well take the other two hooks and hook them to the bottom of the trunk lid.
What our customers are saying:
"Found your site on google, after a quick search I found the bike rack I wanted at a great price. Placed my order, and just under a hour 3 emails,1, order recieved,2, order in stock,3, order shipped. Never have I had such luck with a online shop. Thank you"