# 1
Rhino-Rack SX Series Legs for Vortex Aero Crossbars - Flush Factory Side Rails - Qty 4
Great product and service. It took me a minute to figure out how to properly connect the legs to the bar, but once I did it was easy to install. Seems sturdy, but haven't put them to use yet.
2017 Kia Sorento L
# 2
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2
Perfect. Low Profile, Looks Good. Solid Rack System. Had a year and Highly recommend
Hi George from etrailer, The rack is awesome! Strong, firm hold and nice looking. When doing surveys, I put my ladders on the rack. I highly recommend this etrailer.
# 3
Fit Kit for Thule Podium-Style Roof Rack Feet - 4057
Seriously easy and fast install and looks great on our 2015 Kia Sedona with attached roof rails. Quick delivery too and the best price anywhere for the whole setup. Really happy with this purchase.
# 4
Malone SteelTop Roof Rack - Square Crossbars - Raised, Factory Side Rails - Steel - 50" Long
I got a really great deal on this MPG201 kit via the "used" section, which wasn't used - I contacted support and it was listed essentially as "damaged in shipping" but fully functional, which it was. It came with no keys but I used a small flathead screwdriver to unlock them, necessary for rack installation. Not a biggy. One of the plastic feet split on install, which Malone rectified without hassle, and sent keys, when I contacted them with a photo. They make a decent rack for the money, I bought a different kit from them years ago. The connection beneath the roof rails is minimal but seems sufficient for surf and snowboards. I sent photos to Malone who confirmed the install is correct.
These 50” rack and risers fit as advertised on our 2017 MiniCooper Clubman with use of the clamp adapter. Just finished testing them to transport two bikes up, over and back across the Appalachian Mts on both steep backwoods roads and open highway with zero problems. Unrelated to this product, I had a comparability problem with my Yakima bike rail clamps that are smaller than the roof racks diameter and require some finagling which others might not be able to make work. So check on clamp size comparability if these are to replace an existing Yakima roof carrier system. Again, this is not an etrailer product critique!
# 5
Thule AeroBlade Edge Roof Rack - Fixed Mounting Points/Flush, Factory Side Rails - Aluminum - Silver
etrailer provided great shipment/notification support. Little more than trivial to install Thule AeroBlade onto 2021 Mazda CX-9, but etrailer was great resource for how-to videos that were key to successful install. Quality materials and convenient design. No significant noise noticeable from wind resistance when driving.
Had to have them installed professionally for my type of car. Just what i needed. Ford transit connect. Long wheel base.
# 6
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long - Qty 2
The crossbars came together with all mounting hardware, platforms and legs. Evertyhing arrived together in short time and was raasonably easy to assemble. The quality is good and solid, and all at a good price. A year later, they still look great and perform well. I highly recommend purchasing from etrailer.
2019 Jeep Grand CherokeePurchase for a 2019 Jeep Grand Cherokee, black rails. Perfect fit.
# 7
RidgeLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4
Received this Yakima roof rack system for my flush-rail 2019 Mazda CX-5 Signature on Thursday, and installed it on Friday. It’s not the simplest installation I’ve encountered, and I’d had a number of Thule products before. I found the installation “picto-grams” not that helpful. Also the 3.5 newton-meter torque screwdriver provide would not “click”. It looks great on the Mazda, but took about 4 hours to install - getting the clips in place was an issue ; I got the outer to clip on, only to find the inner had come off its attachment clips- very frustrating.
With exception of getting wrong towers (crossbar vs streamline), installation was fairly painless. Pay attention to measurements during install! Looking forward to the Yakima 16 to be fitted shortly and then ROAD-TRIPPING.
# 8
Yakima RoundBar Crossbars - Steel - Black - 48" Long - Qty 2
I ordered the Yakima roof rack, with the Hullyrollers for the back crossbar and the Mako saddles for the front crossbar to use with my kayak. It arrived just like they told me and I put them on my car the eveningit arrived. Got to finlly use the roof rack on June 22 to go out kayaking and it worked great. Only thing is I did not know about the air reflector piece for the front crossbar. Now I will be ordering it to help with the wind noise.
Great rack, go on fast, easy to install and work well on my VW TDI wagon. Care has to be given and follow the instructions for the install to what type of rails you have. Works great carrying the VW luggage carrier and plan on using it to carry kayaks as well. Just have not decided what kayak rack type to get yet.
# 9
Yakima RoundBar Crossbars - Steel - Black - 58" Long - Qty 2
Free delivery that showed up in 3 days!!! Can't beat it. The crossbars with the Control Towers and LandingPad 9 fit perfectly on my Honda Element. Had them installed in about 30 mins. Don't have my cargo box yet and wanted to test strength, so I had my 110lb wife standing on them with no issues (yes, the car was parked). Plan to take a long camping trip next week with a cargo box on top...wife will be in the vehicle:-)
works good
# 10
Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2
Yakima racks are outstanding!
The product itself was excellent. However, it came with no installation instructions showing how to remove and replace the shorter cross-bars. Fortunately, my son-in-law who is an engineer and very knowledgeable figured it out and did the installation.
# 11
Malone AirFlow2 Roof Rack - Aero Crossbars - Raised Side Rails - Aluminum - 58" Long - Silver
Worked as designed. Some measurement needed to cut and install seal between attachment brackets, and little trial and error to center/balance the bar across both points (just as one would with a cargo box).
I've had these on my car for a year now. They are decent for the money and I think they look pretty good too. One very weak point is the plastic end caps. They snap on and are flimsy. I lost one in short order and broke another one sliding a sheet of plywood over it. It would not be hard for them to design a better cap that is fastened better to the rails. I 3D printed new ones that work great and installed with a screw.
# 12
Inno Flush Feet for Aero Crossbars - Raised Side Rails - Qty 4
These are held on by rubber straps. Not worth $[XX]
Great looking and easy on and off for adding accessories. The keys work easily as well.
# 13
Inno Aero Crossbars - Aluminum - Black - 39" Long - Qty 2
I recently drove round trip in terrible weather to Boston from Orlando a trip of over 1500 miles...My Inno Elliptical Roof Bars Roof Rack held up perfectly. I especially like the "keyed" function. I highly recommend them to anyone needing a strong, weatherproof, and secure roof rack.
Fit and finish superb, if you’re looking for bars that are super quiet and low drag, these are really slippery.
# 14
Yakima JetStream Crossbars - Aluminum - Silver - 60" Long - Qty 2
These bars worked great for the roof rack on our truck. Thank you!
Easy to install and met my need for hauling a kayak.
# 15
Inno Square Crossbars - Steel - Black - 58" Long - Qty 2
Great looks, feels very sturdy. Super easy to install. Only downside is they are a little noisy, but that was expected from the square bars. Went with square bars to use my older Thule kayak and bike rack systems. I installed the Inno mounting system myself...no problem. Directions were very good!
etrailer.com you guys are great every thing came on time. i bought the inno sq bar roof rack for its price point and i like the look. I have a thule roof box I need to mount . The SQ bars are a bit noisy so I plan on buying the rack faring. On the front mounting pads the directions say there is a gap but it seems extreme i will post a pic I also checked the measurements 3 times. when i get a chance i might re-adjust the front pads.. Please Advise
# 16
SeaSucker Monkey Bars Roof Rack - Round Bars - Vacuum Cup Mount - 48" Long
Easy fit on Tesla Model X. Our fitment is for carrying kayaks and the occasional roof box. I would give these 5 stars if SeaSucker had the option to pivot the front mounts 90 degrees to decrease a sloping roof angle. The front mount placement is critical on a Model X as the front glass roof slope/curve means you'll definitely need to moisten the cups and press down firmly while suctioning to get a good fit. Another recommendation is to let the racks sit for 2-3 hours and then check the plungers to see if any have released air (clean and reposition if they have). Repeat the same dry fitment with your cargo attached.
I've waited until I had a chance to install it and test it on my 2017 Mustang before wrote this. Fits perfect and ruggedly built. I thought we would never be able to transport two kayaks but they proved me wrong. Love these Monkey Bars.
# 17
Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars - Black - 65" Long
The Rhino Rack HD crossbar kit for tracks fits my SyneticUSA Pro retractable cover perfectly. RR includes several track nuts of different sizes to match to your particular track. I love the quick detach capability of the towers and that they also lock for security. The HD bars are essentially the same dimension of 1 5/8" unistrut/superstrut so you can find all sorts of attachment hardware outside of what RR makes. This makes it easy to securely bolt your gear down to the cross bars and customize with easy to find hardware at your local home depot. The 65" HD bars are perfect for a mid size truck like my Tacoma.
The rack more than exceeded my expectations. It was easy to assemble and mount on the cap of my Tacoma truck. I was pleasantly surprised by the aerodynamics which virtually eliminate wind noise, even at highway speed. I pirchased the rack as a permanent mount for a 4rod flyrod holder which I use daily for fishing. The Rhino keeps everything “tight and right”. It has worked perfectly for nearly three hundred trips and over 15,000 miles this year.
# 18
Thule Top Tracks for Roof Racks - 54" Long
I was looking for a way to inexpensively outfit Mt trucks topper with a set of Thule roof racks from a previous vehicle I had. Etrailer had a “used” set of tracks, sans hardware, for a very reasonable price, SCORE! Thank you Etrailer for coming through once again! The tracks arrived quickly and appeared as new! I would have had to buy different mounting bolts anyway as my topper has a storage compartment on one side and a couple hanger brackets that are “built-up” in thickness on the other, standard hardware would be too short. This option saved substantially, thanks to Etrailer!
The track kit arrived without the installation hardware, all I received was the track itself. Once I contacted etrailer, it took another 8 days for the hardware package to arrive. That was disappointing. TI thought they would have sent it next day air. Installation went smoothly overall. Directions were good. The rack once installed has a tendency to move from side to side with minimal effort....not sure if this is going to be a problem or not. The reason is that the flare nuts rest above the roof line by approximately 1/32" once they are installed. Since the flare nuts are higher than the roof, this prevents the track from resting totally flat so it will wobble on the flare nut (similar to a teeter-totter vulcrum).
# 19
Rola Sport Series Roof Rack with REX Mounting System for Flush, Factory Side Rails - Silver
The Rola Cross Rails; Look Great, Easy to Install and Lock in place to prevent theft. Thanks for the speedy delivery. Prescott, Ron.
Like the roof racks. They fit well, and are very secure. Fit an finish are good. There is a key lock on each end of the racks, which we can not figure out what it is for. Our only really complaint that we have with these racks is that they tend to generate a bit of wind noise on the road. Very happy with purchase
Rola Sport REX Series Roof Rack Installation - 2016 Kia Sedona
Speaker 1: Today on our 2016 Kia Sedona, we're going to be installing the ROLA Sport REX Series Roof Rack, part number 59684. These crossbars are going to allow you to carry bike racks, ski racks, cargo boxes, cargo baskets and more on the roof of your vehicle. The low profile elliptical design is going to give it an aerodynamic shape that's going to reduce wind noise and drag.They're made of a sturdy, lightweight aluminum that's going to have 110 pound carrying capacity. Now, you do want to check with your vehicle's owner's manual to ensure that you can accommodate that load. Because it's made of aluminum, it's going to be rust and corrosion resistant. The nylon foot packs are going to be glass filled and clamp onto your rails snugly.These three inch wide, 52 inch long crossbars are going to extend past your foot pack to maximize your carrying capacity.
Thule Crossroad Roof Rack Installation - 2012 Kia Sedona
Today on our 2012 Kia Sedona, well be test fitting the Thule Crossroad Roof Rack using the 50 inch square bars, part number THLB50 and the Thule Crossroad Roof Mounted Rail Foot Pack, part number TH450. With our vehicle already equipped with the factory side rails and our roof rack already pre-assembled, were ready to go ahead and mount it to the vehicle. We begin by placing the front crossbar on top of the vehicle. Well need to center the crossbar from left to right. Well also need to make sure that the triangles on each to the feet are centered over the side rails. We also need to locate a fixed point on each of the side rails to do a measurement.
Thule AeroBlade Crossroad Roof Rack Installation - 2012 Kia Sedona
Today on our 2012 Kia Sedona, well be test fitting the Thule AeroBlade Crossroad Roof Rack part number TH450R and part number THARB47 with our vehicle already equipped with the factory roof rails and our crossbars already pre-assembled, were ready to go ahead and fit them to the vehicle. Well begin by setting the front crossbar on top of the vehicle. Well need to center it from left to right and ensure that the triangles on each foot are over the side rails. At that point, we can go ahead and tighten it down using the included Allen tool in each foot. With the each foot snuggling in place, you do need to make sure that your crossbar is square. To do this, find a fixed point on the side rails and measure to the foot with the tape measure.
Rola Sport Series Roof Rack Installation - 2006 Kia Sedona
Today on our 2006 Kia Sedona we'll be test fitting the Rola Sport Series Roof Rack with RBU Mounting System for Raised Factory Side rails, part number 59899. To being our test fit we'll slide our front crossbar onto the front of our roof. We'll then measure from a fixed point on our raised side rails to get the front crossbar perpendicular to the roof.We'll measure this on the both the passenger and driver's side of the vehicle. Once we've established this position we can turn the black T-handles that tighten down the claws to secure the front crossbar to the raised side rails of our vehicle. We'll then push in the T-bolts and using the key lock them inside of the claw.We'll then place our rear crossbar onto the rear of our roof and measure the crossbar spread. The crossbar spread is the measurement from the center of the front crossbar to the center of the rear crossbar.
Rola Sport Series Roof Rack Review - 2006 Kia Sedona
Today on our 2006 Kia Sedona we'll be test fitting the Rola Sport Series Roof Rack with RBU Mounting System for Raised Factory Side Rails, part number 59898. To begin our test fit we'll place the front crossbar onto the roof of our vehicle. We'll slide the jaws onto the raised side rails and measure from a fixed point on the side rail to make sure that the crossbar is equal from that side point on both sides ensuring the crossbar is perpendicular to the roof of our Sedona.We'll measure this on both the passenger and driver's side of the vehicle. Once we've established this position we can turn the black T-handles to tighten down the jaws to our factory raised side rails. Once we got them all tight we can push them in and use the key to lock them in place.We'll now load our rear crossbar onto the rear of our roof, slide the brackets onto the raised side rails and measure the crossbar spread. The crossbar spread is the measurement from the center of the front crossbar to the center of the rear crossbar.
Rhino Rack Roof Rack Installation - 2006 Kia Sedona
Today on this 2006 Kia Sedona with factory raised side rails we are going to be installing a Rhino roof rack part number SXB3. We already have our crossbar assemblies put together so now we are ready to mount them on our vehicle. First we will set our front crossbar assembly up on the side rails. Before we start tightening down we are going to check to make sure the crossbar is overhanging evenly on both sides. We also need to ensure that the crossbar is running perpendicular to our factory raised side rails. To check this we are going to measure from the front end of our side rail to the leading edge of our feet on our Rhino Rack roof rack. We will make sure it is the same on both sides so that we know the crossbar is perpendicular to the side rails. Once we have checked all of our measurements and ensured the crossbar is into position we can go ahead and tighten it down. We will take the included allen key and move back and forth from the passenger side to the driver side tightening down the roof rack systen evenly. This will help ensure that we do not lose our positioning and that we do not have too much tension on one side or the other. As we tighten the allen head bolt our rack base will clamp onto the side rails and it will also lock onto our crossbars. Once we have the front crossbar tightened down we are ready to move to the rear of the vehicle.
What our customers are saying:
"Excellent service and fast shipping."