# 1
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
This hitch installed in a breeze on my old Turbo TJ Wrangler with all the fresh hardware included. The alignment was spot-on as well, which is always nice! The hitch fits snugly under the rear bumper and doesn't interfere with my exhaust outlet either. After a year of substantial use, this hitch is still performing 100%. Altogether, I couldn't be more satisfied!
The build quality of this hitch receiver is excellent -- wonderful fit and finish. It fit perfectly on my 2006 Jeep Wrangler, and the finishes all look very high quality. I put a 1up bike rack on the hitch receiver and have driven 3 bikes about 150 miles and had very little wiggling and jiggling. I am incredibly happy with the hitch and am an etrailer customer for life.
# 2
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
The correct product was delivered timely.
Excellent parts and service
# 3
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
The hitch arrived on time as expected and fit my jeep exactly as the directions and video detailed. I reused the bumper guards with the hitch. I have ordered numerous hitch's from etrailer and have been completely satisfied every time.
Very well made, excellent paint. Installation was fairly easy, had to install 4 nuts up inside bumper frame, a little challenging, but not impossible. Heavy duty hitch, looks good and should do the job for me.
# 4
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Installation was fast and easy. I used a car jack to keep it in place and installed it by myself. The toughest part was removing the existing bolts in the frame. The angle of the bolts on the passenger side are hard to work with if you want to use power tools, so get a ratchet-wrench if you don’t have one. It looks great on my Jeep, can’t wait to use it!
Product arrived promptly in great condition. Installation time was 15 minutes but I viewed the install video before I ordered the product. Hitch looks very nice, installs a snap, and I recommend it and etrailer.com highly.
# 5
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
I have had this hitch for over a year. I love it. I have a luggage rack attached to it and use it year-round. I find it so handy for extra storage with my Jeep Wrangler. I have no issues. The bolts are pretty rusty looking (I live in the north where roads are salted in the winter) so I recommend coating them with some kind of protection. My brother installed this for me. My vehicle was 20 years old at the time this was added.
fits great ez install
# 6
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
Amazing Quality
I watched your install video and then installed the hitch. It was pretty much just like the video. All the bolts lined up perfect! Didn’t even need to take little plate off, just pushed it back a little and slid the hitch in place. Easy -Peasy. That’s why I bought the E-trailer hitch, I wanted it to fit.
# 7
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Purchased for my 2 door JL. The first 3 bolts fit perfectly but the 4th was a little too big so I ran down to Home Depot and picked up a 12mm which fit perfectly. Outside of that assembly was a breeze. Not need to remove muffler as stated in instructions. 10/10 would recommend.
Quality product, easy installation.
# 8
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
Additional pictures for my review. See other review submitted. review [Both the hitch and the wiring harness arrived with the packaging beaten up and gouged out . Also one of the mounting holes on the plate to attach the hitch does not match up with one of my holes on my Jeep. I have to drill it out to use the hole on the hitch mounting bracket.]
Fairly easy install. However holes don’t exactly line up. I was able to muscle most of them but one is about 1/4 inch off. See pic. I would return but taking it off would be a hassle and I don’t plan on hauling heavy trailers. A bit more wiggle room on the holes to accommodate for decades of metal expansion and changing shape would be nice. I strongly recommend you dry fit first and bore out holes that don’t line up. Especially the bottom 2 bolts. Quality seems good otherwise
# 9
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Perfect fit (2024 Jeep Gladiator), Easy installation. solo installation...30 minutes.
The hitch itself works fine and as you would expect. Installation is straightforward and easy. The reason why I’m rating this low, and honestly I can’t believe they would ask me to rate this one year later, is because I ordered the wrong hitch initially due to not selecting the correct package on my vehicle. After them refusing to help me return the old hitch in anyway and then they charged me $80 for one fishing wire all I can say is if you ever order the wrong hitch from these people just keep it. It’s better than paying $200 to test to see if it will work on your truck. I will never use etrailer again.
# 10
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
#1. This receiver hitch fit perfectly. It slid on easily and the four holes matched up for the bolt installation. #2. eTrailer's customer service is top notch. I returned the Curt hitch without any push back from eTrailer because it didn't slide onto the rear crossbeam of my Jeep. I received the Draw-Tite in just a few days. I wouldn't hesitate doing business with this company in the future.
Excellent built hitch. Has a higher tongue weight rating than the Mopar hitch (Jeep JLU Sport S). Bolted right up to my Jeep, no need to drop the exhaust. Took probably 5 minutes to install. Instructions call for 18mm wrenches but the actual size required is 19mm, and there is enough room to get a ratchet in there, easily, despite the instructions indicating there isn't. Fast shipping from trailer and a fair price. Thanks!
# 11
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Ease of installation a snap. Fit existing holes. Got lucky on arms that bolt to frame. Already had holes so no drilling.
I can not review the performance of the Hitch yet because I have not used it for towing. I installed the hitch on my 1982 Cj7. The design and fabrication of the hitch is very nice. The installation was very straight forward. I did not have any issue during installation. This hitch receiver fit this challenging application very well. Thank you etrailer.com for the solution you provided for the CJ.
# 12
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
"I was thrilled with how perfectly the product fit. The only hiccup was the shipping, which was delayed due to unexpected weather conditions. However, this was more than made up for by the exceptional customer service I received from Kimberly. She was proactive, communicative, and incredibly helpful in locating my order and ensuring it was delivered promptly. Her assistance was so remarkable that I'm now a committed, lifelong customer of Etrailer."
This a high quality and easy to install receiver. Well worth the money!
# 13
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Very straightforward installation on my 2022 Jeep Gladiator. You will need to have a hole saw and seriously big torque wrench or bar to complete the job.
Directions could be better. The access holes are round and not square, we had to take out the pre-installed bolts that were into the bumper beam in order to thread the block and the bolt through. It was not easy to thread even then and had to use a pin magnet to help guide the bolt to the correct place. Installment was not as easy as described and an instruction video would be extremely helpful!
# 14
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
My trailer hitch tried to get out of the box during shipping. Luckily everything was still in the box when I received it.
This is my second etrailer hitch. I’m very happy with them. I did the install alone. Better to have a friend help. I was able to install it without having to lift it off the ground. It probably would have been easier if I had put it on jack stands. I’m not a mechanic, but I decent around tools. You don’t need to be an expert to install this.
# 15
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Came 2 days early, didn't take my money till they ship it. Plus I never like to order anything online because I'm afraid it won't fit. But they said it would an it did( 2016 chevy traverse). Also it says 45 mins to install. Sounds About right 10 mins asking the wife an kids to help hold it up with no luck, 10 mins looking for my tools 18mm & 3/4 wrench,10 mins looking at the picture of the instructions because what GUY really reads it? lol, 10 mins putting it on by myself laying on my back in the driveway using my leg to hold it up & 5 mins putting on 1 bolt by the muffler because I didn't read the instructions an lower the muffler out of my way hahahah. P.s is you have soft hands I suggest wearing gloves an waiting for the muffler to cool off because i didn't ??. But all in all it was easy & fast to put on even if your by yourself. Definitely ordering again if I need anything for her car. Thanks etrailer
The instructions were spot on The videos were extremely helpful Price was great, and buying the trailer hitch, wiring harness, and fuse together as a package made the project easy. I would not hesitate to do that again when necessary.
# 16
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Exactly as described! I have an older 2011 Honda Odyssey that I needed a hitch for and didn’t want to spend a ton of money for the minimal use it would get. When I researched hitches etrailer kept coming up with great reviews. Their site rated the install at 3 out of 10 stars and the reviews said 1-2 hours doing it alone. It was super easy. No ramps or special equipment or fancy tools needed!
Great quality hitch. Easy install. I used jack stands and a cinder block to hold it in place while I bolted it on. No rust on it yet which is good for living in New England.
# 17
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Super fast shipping,Fit perfectly.Couldnt be any easier. 45 minute installation including the wiring harness. I highly recommend etrailer hitches.
I'm beginning by giving the hitch a stellar rating and, in the spirit of full disclosure, will state That I haven't even used it yet. In fact it has been only 2 hours since I installed it on my 2010 Chevy Express van. I intend to go to the DMV on Monday and get the tags for my trailer and later in the week will get my Hopkins wiring kit and on the following day will take it on a fishing trip. At that time I could write another review. I will say however I was very impressed with the quality and workmanship of the hitch itself. I have no doubt that it is strong enough to pull a far heavier load than my canoe and I also feel that premature rusting will not be a factor.
# 18
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
I have purchased 4 receivers for 4 different vehicles. They were all easy installations and that includes the lighting harnesses.
Hitch arrived in only three days. Instructions were great and easy to follow. Hitch installed with no problems. Highly recommend this hitch and company.
# 19
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Its been a year since installing the Hitch Receiver. Granted it nearly never rains here in Arizona but i use the hitch everyday and drive a dirt road so I end u reunning the truck through the car wash at least 4 x a week. The hitch stil looks and performs axactly the same as the day I installed it. Although its not recommended I managed to install mine by myself, with no lifs or jacks. It was a bit awkward but I had it installed in about 30 mins on my 2016 Jeep Patriot.
This hitch wasn't quite as easy to install as in the video without the car up on a rack. The video was helpful. The hitch requires some jockeying around to get both bolts to go in. I used a couple of jacks to make it happen. The brackets were a little narrow for my 2014 Jeep Compass so I used a few 1/8 inch washers on one side to avoid stressing the welds too much on tightening. In the end the install came out good and the hitch seems solid.
# 20
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Easy to install. Good price, it went on a Jeep Grand Cherokee, works great
This hitch I installed myself, it took me maybe 10 mins. Make sure you torque the bolts to spec and you’re good to go. I’ve towed boats, utility trailers, the works. Not a single problem
What our customers are saying:
"Thanks for everything. My hitch looks great on my truck. Appreciate the service."