# 1
Rhino-Rack SX Series Legs for Vortex Aero Crossbars - Flush Factory Side Rails - Qty 4
By far the best price/ value in a quality rack for the Hyundai Santa Fe Sport, and etrailer has the best price on the internet. Have a look at the Thule, but I can't imagine that anyone with common sense would choose the Thule over the Rhino rack system. The Thule has far less carrying capacity and costs a lot more. The Rhino Rack has the highest load carrying capacity among it's competition and is designed to work specifically with the mounting system that is factory stock- i.e., the factory rails on the roof have a 3 position mounting hole system that locates the Rhino rack and also greatly adds to the strength and stability. I would add that when assembling and mounting them, pay very close attention to two things: 1. As shown in step #1 in the printed instructions, there is a cam that has to be inserted *inside* the cross bar, not under it. It takes some effort and attention to position it properly and ensure that the the cam does go up inside the bar when the foot is slid onto the bar, but you have to, the legs will not clamp to the cross bar if it is not. 2. As shown in step #3, the small pin on the metal plate of the leg has to go firmly and completely into one of the 3 holes on the factory roof rail. When I first did it, it was in a little, but not seated firmly, so the rack was not attached securely to the car, even though it was tightened down all the way. Glad that I looked closely and re-did it correctly. You have to wiggle the plate and pin until you feel it pop into that hole, then hold it there with one hand as you tighten down the lever to secure it with the other. When correctly fastened, the Rhino Rack has no play or looseness- it is attached very firmly. Also, I have the panoramic sun roof on my Santa Fe, I can confirm that you can open and close the sunroof without any problems with the rack mounted- there is plenty of clearance. That may change depending on which accessory you attach to the rack. This is a 2015 Santa Fe Sport. I am doing a renovation on a house I bought recently so I haul a lot of lumber etc from the hardware store. I was concerned when I replaced my Cherokee with the Santa Fe, that I would not be able to carry lumber and sheet goods, but with the Rhino Rack, I can carry everything that I need on top, securely. Seems easy to get on and off, once you installed it the first time and established the position of the legs on the bars. I'll put it on when needed to carry something, then keep it safe and out of the hot sun in the garage when not in use. Probably a good idea to take a label maker and add small tags on each bar in a hidden place to indicate which bar goes front and rear- also left and right for each, so you can re-install with minimal confusion.
Fits perfectly. Installation requires focus. Getting that Aero crossbar mounted just right was a little bit tricky because of the metal cam engaging the slot. Once I wrapped my brain around how that was supposed to work, they went on super solid. If you don't get the metal cam in place - it will make it nearly impossible to get this mounted correctly to the flush mounted rail. Read the Q&A - its covered extremely well in there. I do like the lock and key but they are not the best quality. I think if someone wants to take it they could do so with little effort. So far, I'm quite happy overall.
# 2
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2
Perfect. Low Profile, Looks Good. Solid Rack System. Had a year and Highly recommend
Hi George from etrailer, The rack is awesome! Strong, firm hold and nice looking. When doing surveys, I put my ladders on the rack. I highly recommend this etrailer.
# 3
Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof
Overall, happy with the product. I found that every few days after long drives the roof clamps loosen slightly and need to be re-tightened, depending on your load. When first installing the roof clamps, one of the clamps had a small metal bur on the edge (manufacturing defect) which left a nice sized scratch in the roof. Other than that, the rack has been a good product for the price.
Terrible product! I had to tighten the piss out of the clamps just to get the doors to shut. But the window frames were pushed out. So I had to adjust all the striker pins in the door jams down. But the weather strip does not form fit around the clamps and now there's terrible wind noise. If you have a naked roof, get the factory rails. Taking these back off.
# 4
Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4
i George from etrailer, The rack is awesome! Strong, firm hold and nice looking. When doing surveys, I put my ladders on the rack. I highly recommend this etrailer.
I put 3 stars because its a useful functional non-harmful roof rack solution for my WRX sedan. This review lost 2 stars because the rubber top pieces get damaged upon any accessory removal or install like(bike, snowboard rails etc). Additionally, these accessories also look to be weathering quickly because of build quality. Hopefully this helps your decision! Thanks
# 5
Rhino-Rack RVP Roof Rack for Fixed Mounting Points - Vortex Aero Crossbars - Aluminum - Qty 2
Installation was straightforward and I feel stronger than the factory crossbars which clamp on, as these cross bars screw into the connect points for the rails. These rails are also flatter than the factory installed rails. But are not perfectly flat. Roof-mounted bike racks may still lean a little bit. Which what I was trying to solve by replacing the factory cross rails/bars.
Was thinking 5 stars but now I hear a whistling noise coming from the rack, which is not cool. I'll check on that and revise if it gets better (or worse). It definitely fits on a panoramic roof without issue. It was really easy to install on my 2019 Hyundai Santa Fe. The only caution I'd have is to make sure to use the small diameter washers that were supplied. Otherwise you won't be able to get the locking cover on. Otherwise it wad an easy install.
# 6
Yakima RoundBar Crossbars - Steel - Black - 58" Long - Qty 2
Free delivery that showed up in 3 days!!! Can't beat it. The crossbars with the Control Towers and LandingPad 9 fit perfectly on my Honda Element. Had them installed in about 30 mins. Don't have my cargo box yet and wanted to test strength, so I had my 110lb wife standing on them with no issues (yes, the car was parked). Plan to take a long camping trip next week with a cargo box on top...wife will be in the vehicle:-)
works good
# 7
Fit Kit for Thule Podium-Style Roof Rack Feet - 3024
Service was fast and the product fit to the tee.
# 8
RidgeLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4
Received this Yakima roof rack system for my flush-rail 2019 Mazda CX-5 Signature on Thursday, and installed it on Friday. It’s not the simplest installation I’ve encountered, and I’d had a number of Thule products before. I found the installation “picto-grams” not that helpful. Also the 3.5 newton-meter torque screwdriver provide would not “click”. It looks great on the Mazda, but took about 4 hours to install - getting the clips in place was an issue ; I got the outer to clip on, only to find the inner had come off its attachment clips- very frustrating.
Placed the order for the rack a year ago. I didn’t like the way it sat on the roof of my vehicle, but because I had already installed it, etrailer customer service refused to take it back. I would’ve gladly paid for the return shipping or some sort of restocking fee, but that wasn’t an option. I’ve had brand new rack and hardware sitting in their original boxes for a year.
# 9
Yakima JetStream Crossbars - Aluminum - Silver - 60" Long - Qty 2
Easy to install and met my need for hauling a kayak.
Strong, Solid Bars, Super Light, and really easy to install!
# 10
Thule WingBar Evo Crossbars - Aluminum - Silver - 47" Long - Qty 2
Product came in as ordered and worked great. Will definitely be back for future needs as Stacey in CS was very knowledgeable and friendly!
Bought the Thule Wingbar Evo 118 crossbars and Thule Evo Raised Rail footers and installed them on my 2016 RAV4. Pretty easy to install and I did watch a few videos online to make sure I was doing everything right. I like the new raised rail system from Thule as it is clamp style versus the rubber strap - both work very well, but the newer clamp system is nice because the tool you use to tighten the footings clicks when it reaches the right tightness so you don't over tighten it. I recommend these rails and the footings (Thule 710401) as the system is quiet when driving and looks good.
# 11
Inno Feet for Square Crossbars - Track Systems, Flush Side Rails, and Fixed Mounting Points - Qty 4
We bought this along with the INTR102 Custom Fit Kit. We used this to mount Thule crossbars and a Thule Adventurer cargo box on a 2001 Subaru Forester. Everything fit perfectly. The Inno mounts were completely compatible with the Thule crossbars. The fast and accurate shipping helped avert a crisis before a cross country trip.
Fit perfectly on our 2007 Subaru Legacy Wagon w/flush mount rails. We had our doubts but put our faith in C.S. Rep. He was right (of course)!! The fit on the stock rails perfectly. My husband didn't really have trouble installing them at all. We also got the Inno Fit Kit Hooks and the Inno Square Crossbars. Just came back from vacation. They were perfect for my husband's bike. (We did have Thule rails from an earlier bike rack. They fit into the Inno system w/o a problem. Thank You ETrailer for ALL your help. We couldn't have put it all together without you knowledge. Perfect!
# 12
Rapid Traverse Feet for Thule Crossbars - Naked Roof - Qty 4
The whole experience was freakin awesome. * Ordered on-line, delivered when promised, all packages were in excellent condition, and all parts were accounted for - no shortages, THANK YOU! * The Thule roof rack design, quality of materials, comprehensive instructions were really impressive. Everything went together without a hitch and really looks good installed. * We plan on carrying our 12 1/2' SUP's on the roof rack when we head out to the lakes. * It saves us time as our SUP's are inflatable, however it takes a bit of time to pump them up once we get there. Now it's just loosen them up and we're ready to go. Great job etrailer, I would definitely buy more products from your organization!!
Etrailer helped me out of a jam as I could not find the Thule parts I needed. They not only had the parts but got them to me in a few days! Made my trip to Lake Placid possible! Fantastic communication and customer service.
# 13
Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet
# 14
Inno Flush Feet for Aero Crossbars - Naked Roofs - Qty 4
By far the best service I have received in a very long time. I recieved my inno flush feet areo crossbars, sooner than expected and the assembly was just as specified. I especially liked having the video with the tutorial. I like the look of the low profile and the quality is outstanding. I have used this for my kayak and the low profile helps with the loading and unloading. I would highly recommend this product and Company.
Thank you etrailer my car looks great I spent 4 hours to ensemble this cross bar and the bask rack but finally I made it now I have more cargo space in my car I really recommend etrailer good quality items and good service thanks again
# 15
Thule AeroBlade Edge Roof Rack - Fixed Mounting Points/Flush, Factory Side Rails - Aluminum - Black
2016 Mini CountrymanThe rails looks and functions great on my 16 Mini Countryman. However, when I drive over 35mph, there is a sharp hissing sound coming from the rails. these rails are supposed to be aerodynamically enough to eliminate sounds. I tried switching the front to rear and same issue. I went as far as taping any voids to see if that would help. Nothing works.
# 16
Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet
Fit perfect, no issues.
# 17
Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4
Nissan VersaThis rack works perfectly on my Nissan Versa for carrying my two Perception Sound 9'6" kayaks. The Rhino-Racks look good to me. The kayaks can rest directly on the rubber pads on the rails, unlike the Yakama racks I had in the past that had bare pipe rails. Also, I expect I can buy parts to adapt this product to a different car without having to buy new towers. I am sorry there are not hooks or loops to attach bungees when carrying lumber. They are noisy in the wind, but less so when carrying the kayaks.
Thanks to Etrailer, I am ready to do some serious summer exploring with my 2013 Mazda 3! Rhino Racks, Malone top box, and Kuat bike rack!
Inno Aero Crossbars Installation Guide - 2025 Hyundai Santa Fe
Hey, everyone, it's Evangeline right here at etrailer. Today, we're taking a look at how this INNO roof rack fits on our 2025 Hyundai Santa Fe. If one of my friends came up to me, and they had raised rails on their roof, and they asked me for a recommendation for their Santa Fe, this is probably the very first one I would recommend. I really like the straps that this roof rack utilizes 'cause that just cinches around your raised rails, giving you a solid base. And with this all set up, you can now carry all kinds of fun things, whether it's a rooftop tent, some kayaks, even some baskets or boxes for extra cargo space, the very first thing you need is a roof rack for your rails. So, let's go take a look at some of its features and why I like it, but also how to help you get the best fit for you.
A Closer Look at the Inno Aero Roof Rack for Raised Rails on a 2024 Hyundai Santa Fe
Hey, everyone, it's Evangeline right here at etrailer. Today we have the Inno roof rack, and we're gonna see how it fits here on our 2024 Hyundai Santa Fe. If you are looking for a very easy to use, easy to install, but also premium roof rack, this might be the choice for you. But there are two choices within this style. So let's go take a look at what might be the best fit for your adventures. Your two-size options for this is gonna be the 54-inch long crossbars, which is what Inno actually recommends for the Santa Fe.
How to Install the Yakima JetStream Crossbars Roof Rack on a 2024 Hyundai Santa Fe
Hi, Matt with etrailer. If you have a 2024 Hyundai Santa Fe and you're trying to get a lot more gear or accessories in here and you got that third row of seating, you're probably not gonna have that much room. And if your hitch is already being used with something else or you don't have a hitch, then the next best option is gonna be a roof. And when, roof rack that I think that's gonna excel at that is gonna be the Yakima roof rack. So let's take a closer look at it. It's important to note though that we have these on raised rails because you can have a couple other roof options for this vehicle.
A Closer Look at the Rhino Rack Custom Fit Roof Rack Kit on a 2024 Hyundai Santa Fe
Hi Matt at etrailer. If you have a 2024 Hyundai Santa Fe and you're trying to carry a few more items, but maybe you don't have a hitch or you're using your hitch for something else, and maybe you got a lot of people with you, you got a full house back here or you already have a lot of items for a super long trip, the next best option is gonna be your roof. And the great option for that is gonna be the Rhino Rack Roof Rack because it's gonna be a really simple sleek installation. So let's check it out. It is important though because, I did say this is an easy installation, and part of that is gonna be because we do have raised rails. Now this car can come with some other different roof options, but a way that you can check if you have raised rails is if you come over here and if you can wrap your hand completely around this rail or if you get your hand underneath it, you got raised rails.
2023 Hyundai Santa Fe Rhino-Rack Vortex Roof Rack: Complete Installation
Hi, Matt with etrailer. If you're looking for an option to give you a little bit more storage space on your 2023 Hyundai Santa Fe, especially if you are trying to haul those longer items, anything like skis or kayaks, stuff that's not gonna really fit in the back of your vehicle or things that are just gonna be a little bit too dirty or items like that, then the Rhino-Rack roof rack is gonna be a great option for you. So let's check it out. To help illustrate what I'm talking about, we threw a ski carrier up here with a ski and you can really see the length of this, and that's something that's definitely gonna be an uncomfortable drive if you have it in your vehicle. 'Cause while the Santa Fe does have a lot of storage in the back, those longer items are gonna be pretty difficult. Not to say that you can't put a basket or a box up here, you're probably gonna be good on space most of the time.
Setting up the Rhino-Rack RVP Roof Rack for Fixed Mounting Points on a 2023 Hyundai Santa Fe
Hi, Matt at Etrailer. If you find yourself going on a lot of vacations and you're finding that your 2023 Hyundai Santa Fe is running out of room in the back, or what's gonna be more likely, you have some items that are extra long that you can't fit back there, anything like ski carriers or a kayak, anything like that that you can't fit back here, then your next best option is gonna be a roof rack. And the one we have today is gonna be the Rhino-Rack RVP roof rack, so let's check it out. And really to help illustrate what I'm talking about, I've got a ski carrier up here at the moment, and you can tell how long this ski is compared to our vehicle, and trying to get it in there is not gonna be ideal. And on top of that, skis also have a lot of snow, dirt, anything like that, and so do kayaks, kayaks have a lot of water on them. That's gonna be some stuff you also don't want in your vehicle.
Installing the Thule WingBar Evo Roof Rack for Naked Roofs on your 2020 Hyundai Santa Fe
Colin: Hey everyone. It's Colin here at etrailer. Today we have a 2020 Hyundai Santa Fe. We're going to do a test fit of the Thule Wingbar Evo roof rack system. Now, this is a roof rack system that's been designed by Thule to mount to the flush-mount side rails of your Santa Fe. It's going to allow you to get your favorite rooftop accessories loaded up, whether it's a bike rack, kayak carrier, maybe even a rooftop cargo box with those accessories on your roof.
Installing the Rhino-Rack RVP Vortex Aero Crossbars Roof Rack on a 2019 Hyundai Santa Fe
Hey everyone, it's Evangeline right here at etrailer. Today we have our Rhino-Rack RVP roof rack. We're gonna see how it fits and I'll also show you how to get this installed on the 2019 Hyundai Santa Fe. If you are looking for a roof rack that's a very sleek, very flush, looks kinda factory, then this might be the option for you. There are different options for roof racks, but I do think this is gonna be one of these sleekest. So why would you get a roof rack Well, if you want to carry around some fun cargo, let's say kayaks, you don't quite have a hitch, you don't wanna wait to carry around bikes, or maybe you need some extra cargo space and you want a roof box.
Installation Guide for the Yakima RidgeLine Roof Rack for Flush Rails on a 2019 Hyundai Santa Fe
Colin: Hey, what's going on guys It's Colin here at etrailer, and today we have a 2019 Hyundai Santa Fe. We're going to do a test fit of the Yakima JetStream roof rack system. Now, this is a roof rack that Yakima has designed to mount to the naked roof of your Hyundai Santa Fe. So meaning you don't have any type of raised side rails are flush-mounted side rails. It's just completely naked. You're just going to have a fit kit from Yakima that you can see right here, where we have a hook in the door jam, and then a pad sitting on top of our roof clamping it down.
2019 Hyundai Santa Fe Thule WingBar Evo Roof Rack for Naked Roofs: Complete Installation
Hi, everyone. I'm Colin here at etrailer.Today we are going to take a look at and show you how to install a Thule WingBar Evo roof rack system on a 2019 Hyundai Santa Fe. Now this roof rack system mounts to the flush side rails of your Santa Fe. It's going to allow you to get your favorite Thule accessories on your roof, whether you have a cardboard box, a kayak carrier or even a bike rack. It's going to just help create space on the inside of your vehicle for more passengers or other cargo.Our roof rack system is made up of a couple of different parts. Up top, we're going to have our 47-inch long WingBars.
Install: Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs on a 2018 Hyundai Santa Fe
Speaker 1: Today on our 2018 Hyundai Santa Fe we're gonna be doing a test fit on the Rhino Rack 2500 series square roof rack system, part number DS1375B and part number DK360.The Rhino Rack square bar system is an entry level roof rack for your Hyundai Santa Fe. Though it's not as aerodynamic or as quiet as some roof rack systems it's still gonna allow you to carry a wide variety of accessories such as bike racks, cargo baskets, kayak carriers and much more. It has a square bar design that's gonna work with most accessories. Here on top the raised grooves are gonna help grip our accessories and prevent them from sliding or moving around.The bars are held in place by four legs and four hooks. Both the legs and hooks feature rubber padding so they won't harm or scratch your Santa Fe's roof. All four legs have a unique design to where the lock and cover hides our hardware so it can't be tampered with or removed, two keys are included.
Set up: Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs on a 2018 Hyundai Santa Fe
Speaker 1: Today on our 2018 Hyundai Santa Fe Sport, we're going to be test-fitting the Rhinorack Vortex Aero roof rack system, comprised of part numbers RRVA137B-2. These are the Vortex Aero crossbars, 54 inches long. These also come in silver as part number RRVA137S-2. We'll also be using part number RRRLKVA. These are the 2500 series legs for the Vortex Aero crossbars. Finally, part number DK360, and this is the custom fit kit for the Hyundai Santa Fe.The Rhinorack Vortex Aero roof rack system is great for carrying a wide variety of accessories on Hyundai Santa Fe, for freeing up space inside your vehicle.
Thule Roof Rack Review - 2017 Hyundai Santa Fe
Speaker 1: Today on our 2017 Hyundai Santa Fe we're going to be doing a test fit on the Thule AeroBlade Edge Roof Rack system. It's available in silver with part numbers TH7602-TH7603 and THKIT4029. For the black, it's gonna be part numbers TH7602B-TH7603B and THKIT4029.The Thule AeroBlade Edge Roof Rack system is specifically designed to work with your Hyundai Santa Fe. It mounts directly to your flush mounted rails allowing you to carry roof mounted bike racks, kayak carriers, cargo boxes and much more. The AeroBlade Edge design is gonna help you maintain that factory look, and it's gonna help complement your roof line.The load bars are constructed out of aluminum. They're aerodynamic, so not only are they gonna be stylish, but they're gonna offer you a smooth, quiet ride.
Set up: Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs on a 2017 Hyundai Santa Fe
Today on our 2017 Hyundai Santa Fe, we're going to be taking a look at the Rhino Rack Vortex Aero Roof Rack System consisting of part numbers RRVA137B-2. Those are the Vortex Aero Crossbars 54" long in black. These also come in silver as part number RRVA137S-2. We'll also be using part number RRRLKVA, and these are the Rhino Rack 2500 Series Legs for the Vortex Aero Crossbars. Part number DK360, and this is the custom fit kit for this vehicle. Now, the Rhino Rack Vortex Aero Roof Rack System is great for carrying a wide variety of objects, and possibly freeing up some space in your vehicle. It can carrying anything from bike racks, to cargo baskets, to cargo boxes to water sport carriers, such as kayaks and canoes, or even ski and snowboard carriers.
Inno Aero Bar Roof Rack Review - 2017 Hyundai Santa Fe
Today on our 2017 Hyundai Santa Fe we're going to be test fitting the Inno Aero Roof Rack System consisting of part numbers INXB138-145. These are the Inno Aero Crossbars. Aluminum. 54" Long and 57" Long. Part number INXS250. These are the Inno Through Feet for the Aero Crossbars.
Installing the Inno Aero Roof Rack for Naked Roofs on your 2017 Hyundai Santa Fe
Today on our 2017 Hyundai Santa Fe, we're going to be taking a look at the Inno Aero Roof Rack System, consisting of part numbers INXB130-138, those are the Inno Aero Crossbars, 51 and 54 inches long; part number INXS250, those are the Inno Through Feet; and part number INK655, and that's the Custom Fit Kit for the Santa Fe. The Inno Aero Roof Rack System is great for carrying a wide variety of objects and freeing up space inside your vehicle. Since it uses the through feet, you can actually have more accessories coming further out as opposed to the other Inno feet that actually cover the end. You can carry a wide variety of accessories ranging from bike racks to cargo baskets to cargo boxes to water sport carriers to ski and snowboard carriers. All four of our end caps have these locks on them, so once you install this to your roof rack it's going to be secured to it. When you remove your end caps, you'll see that it has this rubber strip here in the center. Now, that coupled with the aerodynamic shape of the bars is going to cut down wind noise and drag while you're driving.
Inno Roof Rack Review - 2017 Hyundai Santa Fe INK655
Today on our 2017 Hyundai Santa Fe, we're going to be test-fitting the Inno Roof Rack System, consisting of part numbers INXB108-115. These are the Inno Aero Cross Bars, in black, 42 inches long and 45 inches long, part number INXS200. These are the Inno Flush Feet for the Aero Cross Bars, part number INK655. This is the custom fit kit for the Inno Flush Feet. The Inno Aero Roof Rack System is great for carrying a wide variety of objects and freeing up space in your vehicle. It can carry anything from bike racks to cargo baskets, to enclosed cargo boxes, to water sport carrier, to ski and snow board carriers. Each end cap is lockable so once you install these, they're actually going to be secured to your roof.
Is the Inno Square Bar Roof Rack for Naked Roofs Compatible with the 2017 Hyundai Santa Fe?
Today on our 2017 Hyundai Santa Fe, we're going to be taking a look at the Inno Square Bar Roof Rack System. Consisting of part numbers INB137, and these are the Inno Square Crossbars, 54 inches long. Part number INSU-K5, these are the Inno Feet for the Square Crossbars, and part number INK655, and that's the Custom Fit Kit for the Hyundai Santa Fe. The Inno Square Bar Roof Rack System is great for carrying a wide variety of accessories, ranging from bike racks, to cargo baskets, to cargo boxes, to watersport carriers, to ski and snowboard carriers. It enables you to free up some space in your vehicle, and put some stuff on your roof. The square bars are tough and durable, and have a max load capacity of 100 pounds. Although always double check with your vehicle's manual to make sure your roof can withstand that weight.
Yakima CoreBar Steel Crossbars Installation - 2016 Hyundai Santa Fe
Today on our 2016 Hyundai Santa Fe, we're going to be taking a look at and installing the Yakima BaseLine Roof Rack System with CoreBars. That consists of the 60" Yakima CoreBars, part number Y00422, the BaseLine Towers, part number Y00146, and the BaseClip Fit Kits for Hyundai Santa Fes, part number Y06130 and Y06133. This heavy duty, yet quiet, roof rack system maximizes the carrying capacity of your Santa Fe. The aerodynamic teardrop shape controls air flow to minimize wind noise and vibration. These steel crossbars are going to allow you to attach a wide variety of accessories to your Santa Fe's roof, such as bike racks, boat carriers, and roof mounted cargo baskets. The BaseLine towers are going to support our CoreBars and the BaseClips are going to provide a custom fit to our Santa Fe. For more security, you could pick up the Yakima Same Key System Lock Cores with part number Y07204. It's an easy installation. We'll go ahead and show you that now.
Fit Test: Rhino-Rack SX Series Legs for Vortex Aero Crossbars with 2016 Hyundai Santa Fe
Today on our 2016 Hyundai Santa Fe, we're going to take a look at the Rhino-Rack Vortex Aero Roof Rack System. The crossbars are RRVA137B-2, and the legs are RRSX032. I have the first one already on. I'm going to show you how to install the second one. What we have here, we have our Aero Bar. We have our legs that go to our side rails.
Thule Roof Rack Review - 2016 Hyundai Santa Fe
Today on our 2016 Hyundai Santa Fe, we're doing a test fit of the Thule Aeroblade crossbars. Part number for our crossbars is THARB47. For the foot pack we are using today, we are using the podium mount, part number TH460R, and for the fit kit for our Santa Fe, we are using THKIT4029. I already have our front bar on. On our back bar, I've got one foot pack already in place and installed, so we're just going to show you how to do the other one on this side, and then we'll show you how we load up our back bar. We're going to take these two pieces from our foot pack. I've gone ahead and moved it so the hole lines up in the center there.
Fit Verified: Rhino-Rack SX Series Legs for Vortex Aero Crossbars on a 2015 Hyundai Santa Fe
Today on this 2015 Hyundai Santa Fe, we're going to be test fitting the Rhino-Rack Vortex Arrow Crossbar Roof Rack System, consisting of part numbers RRVA137B-2, those would be the crossbars, and part number RRSX032, and those are the SRB legs for the Vortex Arrow Crossbars. We already have the front crossbar installed, and these are going to work in the fixed mounts on your flush rail system on your Santa Fe. You're going to have three options to mount them in, and we've decided to go with the center option, and we'll repeat that for the rear, as well. Let's go ahead and show you how the rear one goes together. We already have it partially assembled, as that we have one leg already attached. I'm going to go ahead and flip this upside down. We'll start at the end. We'll pull off our end cap first, set that aside, then we'll take our leg and put it in place.
How to Install the Rhino-Rack SX Series Legs for Vortex Aero Crossbars on a 2014 Hyundai Santa Fe
Today on our 2014 Hyundai Santa Fe Sport were going to be installing the Rhino Rack Vortex Aero Crossbars in Aluminum in the black color. These are 54 inch long as well as the Rhino Rack SRV leg kit for the Vortex Aero Crossbars in flush factory rails. The crossbars are part number RRVA137B-2. The SRV leg kit is part number RRSX032. These are sold as a kit. Weve gone and already installed the rear crossbar and the foot pack to show you what it looks like on the vehicle. Now youll notice that there are three holes drilled into the roof bar. Now on our particular application here today we chose to put it in the center mounting location.
Fit Test: Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs on a 2014 Hyundai Santa Fe
Today in our 2014 Hyundai Santa Fe Sport we're going to be test fitting the Rhino-Rack Vortex Roof Rack System. We're going to be using the 54 inch arrow bars. The part numbers are RRVA137B-2, RRRLKVA, and DK360. To begin our test fit we'll grab the front half of our rack here and we're going to open the front doors on our Santa Fe. We'll then place our rack right up on to our the front roof line of our vehicle here. Now per the fit guide from Rhino-Rack we need to measure 16 inches, from the center of the door jam here.
Thule Roof Rack Review - 2013 Hyundai Santa Fe
Speaker 1: Today on our 2013 Hyundai Santa Fe, we're going to be test fitting the Thule AeroBlade Edge Roof Rack System. This is going to consist of part numbers TH7602-TH6703. These are going to be the Thule AeroBlade Edge Load Bars. These also come in black as part number TH7602B-TH7603B. And we're also going to be using the Fit Kit to go around your Flush Mount Side Rails, and that's going to be part number THKIT4029.Now we already have the front bar installed here. And how we got it to this point is we set it on, and measured back from this crevice here, to this point on both sides evenly, to make sure it was going to be in the same spot.
What our customers are saying:
"Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast."