# 1
RetraxPRO MX Hard Tonneau Cover - Retractable - Aluminum - Matte Black
# 2
Extang Trifecta 2.0 Soft Tonneau Cover - Folding - Vinyl
The product arrived ahead of schedule and after having watched your install videos I was able to install it without needing the written instructions. It looks great. The instructions that came with the cover did not show how the bracket mounted on the Ridgeline, but the video you guys produced covered it well. The only issue I had was that the Honda bed upper front hold down point brackets did not fit over the Tonneau Cover brackets, so I left them off. This may be because they strengthened the cover bracket by putting a notch in it. My plan is to grind the Honda bracket to allow space for the obstruction. Thanks again I am thrilled with how easy it was!
Had it installed for almost a year and do like it. Two complaints: (1) even with the cover installed correctly as I'm driving at highway speeds I can see the cover rippling (like ocean waves) from the air leaking past the rubber seal, and (2) when I open lid to the built in storage box in the bed of my Honda Ridgeline the left side of the lid rubs up against the tonneau cover metal bar somewhat rubbing off the black paint.
# 3
BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum - Matte Finish
Items came much quicker than expected,and they fit perfect. Thanks!!!
Excellent cover for the truck. Easy straight forward install. Built to outlast the truck.
# 4
Access LiteRider Soft, Roll-Up Tonneau Cover
Was very easy to install on my 2025 Honda Ridgeline Trailsport. took about an hour. Looks great on truck and fits very nice.
I’m really happy with my truck cover, it is one of the less expensive covers but I must say it’s very effective and if I needed a new cover I would order the same one. Vary satisfied.
# 5
TruXedo Lo Pro Soft Roll-up Tonneau Cover - Black
Pros: Install was easy, improved gas mileage, easy to roll up when not in use. Cons: Needs to be about 1/2" wider on both sides to provide a watertight seal. Biggest draw back - no longer allows for full opening of the trunk in the Ridgeline. Trunk opens to about 75% and this can't be adjusted due to the side rails with the kit (without cutting them and losing structural integrity of the tonneau cover). Trunk is still functional, but not what it was. Overall, very good product, but would have been nice to know the the drawbacks ahead of time. Always great to deal with Etrailer.com though!
Could be a bit wider otherwise very nice. Holding up great!
# 6
BAKFlip F1 Hard Tonneau Cover - Folding - Aluminum and Fiberglass
Easy to install and great fit. My only complaint was there was extra screws included. I had to watch install video to see if I had missed a step. Come to find out there was just extra screws.
# 7
Access Lorado Soft, Roll-Up Tonneau Cover
Directions addendum for Honda Ridgeline are not clear and comprehensive.
Easy install. Only takes one person. Looks great and arrived a week early. My Honda Ridgeline trunk is funtional with top open or closed. Only a slight restriction on how far it will open.
# 8
BAK Revolver X2 Hard Tonneau Cover - Roll Up - Aluminum and Vinyl
Clean look and easy to use. Still very satisfied with my purchase after 1 year. I installed it on a 2018 Honda ridgeline. My only complaint is when I purchased the product, it took them 3 delivery to provide the right attachment parts for my vehicle. Poor workmanship from the manufacturer. This problem as nothing to do with etrailer, which I'm happy with.
I’ve had this cover for over a year and have nothing but great things to say about it. It’s solid, well built, and kept whatever I’ve put in the bed dry.
# 9
Extang Trifecta Signature 2.0 Soft Tonneau Cover - Folding - Canvas
Not too difficult to install and this has been a real help to me in protecting items when travelling. Plus it looks great. A screw connecting a cross bar to the frame came out after about 9 months, but it was an easy size to replace.
Installation on my 2019 Honda Ridgeway was a snap following Utube instructions. Bed remains dry in heavy snow and rain , even at highway speeds. Easy to remove and store during summer months when I am hauling bikes.
# 10
TruXedo Pro X15 Soft Tonneau Cover - Roll Up - Polyester and Vinyl - Matte Black
After 1 year, it shows no sign of wear and continues to work as it should.
Looks great on our parts delivery truck, my wife loves it... happy wife - happy life!
# 11
BAKFlip G2 Hard Tonneau Cover - Folding - Aluminum
After a year it still keeps the bed dry and works the same as when it was brand new. The only issue I have is that installation requires the use of the front top hold down bracket holes thus eliminating any tie down options at the front top of the bed. The hold down brackets are still available at the front of the bed at the bottom but nothing at the top.
Installation instructions were not very clear, but we got it done and have been very pleased with it, both aesthetically and functionally. Great product!!!
# 12
TruXedo Lo Pro Soft Roll-up Tonneau Cover - Black
Came today, it is not installed yet as of JULY 11. Shipping carton is damaged on both ends and carton is partially open in the middle. I cannot tell if there is any damage yet . Will know when installation takes place next week when we open the carton at place of installation.
Installation wasn't too difficult for an old guy like me but......the hardware kit was a little fubar....6 washers, 5 bolts and 7 nuts (the reason for 4 stars).....lol oh well. Still looks great !
# 13
BAK Revolver X4s Hard Tonneau Cover - Roll Up - Aluminum and Vinyl - Matte Black
I’ve had this for a year now. The good: Very nice product, I recommend it. The rollaway ease is great - quick, easy, compact and reliable during near every day use. Effective watertight (not water proof) seal. Definitely recommend the rugged vinyl of the X4 over the X2. The not so good: the ribs can get kinked and are hard to work back into position when they do. This was really only an issue during initial install, so just be cautious to avoid letting it bend the wrong way. The plastic end caps on the lock rail can pop off, so I recommend using adhesive to hold them firmly in place. Overall it’s great. Definitely recommend.
I am very happy with the purchase 1 year later. I have a 21 Honda Ridgeline and found the instalation easy. You need to install the included sidewalls to accommodate the ridgeline bed shape and they do create an extra seam, but its not an issue. I can still access the trunk. Works well.
# 14
Lomax Hard Tonneau Cover - Folding - Aluminum - Black Urethane
perfect fit
# 15
Access Original Soft, Roll-Up Tonneau Cover
The first access tonneau cover I purchased from eTrailer in 2008 and I installed it on my 2007 Ridgeline. The cover held up well and I just replaced it with the same model (cover) this year. It fits perfectly. Good and timely shipping from eTrailer.
OVER ALL VERY GOOD This is a nice cover. It is a changle to install. It took me a little over 2 hours to put in by my self. The problem is with the Ridgeline, NOT the cover. You must take all the bed walls off the truck and this takes time. There is drilling involved, but measure twice and drill once. I marked where the holes were going to go and put the wall back in the truck to make sure it was in the correct spot. The directions were fair, you just have to take your time and double check everything. I am sure if you have the correct tools you could do this job. It is well worth the time because it looks great when you are all done.
# 16
BAKFlip G2 Hard Tonneau Cover - Folding - Aluminum
# 17
Access Original Soft, Roll-Up Tonneau Cover
Works great,I like the extra little height of the access original soft model.
After installation, the cover and its components appear to be a high quality product. It took me approximately 1 hour to install. The installation manual/process would benefit from having color pictures vice the black and white photos.
# 18
RetraxONE MX Hard Tonneau Cover - Retractable - Polycarbonate - Matte Black
It fits great looks great it works e-trailer is a great company to use
The unit shipped to my location with over a months delay. This was too late for our last camping trip of2 2021, which I was counting on using it. I installed this year instead. Some of the tapped holes need to be re-tapped. Also, drain plugs were a little tricky in that the hose interfered with that latching mechanism, so they did not latch correctly at first. The roll-up into the box does not seem as smooth as the videos seem to show. Roll down to close is smooth.
# 19
TruXedo Sentry CT Hard Tonneau Cover - Roll Up - Aluminum, Polyester, and Vinyl - Matte Black
If it was practical to return it, I probably would. I am a farmer and a mechanic, so I can live with it, but not very good. Install was complex and baffling as I have a Ridgeline which is not standard. The worst feature is the back latch or uses a cable pull and two sliding latches which are just trash. Poor design, bad functionality and breaks easily. Mine jammed up and would not unlock, and ended up breaking the cheap plastic lock assembly to get in, result of poor design. Still jams and easier to just leave it unlatched and unlocked. Small rubber seal at endgate fell off and lost. Looks good, secure when it works. Expected more.
# 20
TruXedo Sentry Hard Tonneau Cover - Roll Up - Aluminum and Vinyl - Matte Black
I’m very happy with this cover. It fits well, rolls up easily when needed and does a great job of keeping my cargo safe and dry.
Mount: Extang Trifecta Signature 2.0 Soft Tonneau Cover on a 2019 Honda Ridgeline
Hey guys. Ryan here at etrailer.com. Today we have our tonneau cover on our Honda Ridgeline. Now this is going to do a fantastic job of not only keeping our bed protected from the elements, but also anything that we might have inside.The cover is also going to provide us with some more security, because obviously it'll be covering the bed, which will be covering any items that we have inside, which will keep them out of sight, out of mind.Also, when used in conjunction with a tailgate lock, our bed will be completely inaccessible. Now, if you need a tailgate lock, you can pick one up on etrailer.com.If we need to fold our cover up, it's really easy. Just open up our tailgate, and we'll undo the two latches here in the rear.Just pull it out, and fold it up like that.
BAK Revolver X4 Hard Tonneau Cover Installation - 2018 Honda Ridgeline
Speaker 1: Today in our 2018 Honda Ridgeline, we'll be having a look at, and showing you how to install the BAK's Revolver x4 hard tonneau cover, part number BAK79602. Here's what the Revolver x4 looks like installed. What's great about the Revolver x4, is that it looks like and has the durability of a hard tonneau cover, but yet, has the convenience and function of a roll-up cover. This is what sets this apart from other tonneau covers out there.The reason you're going to want a tonneau cover, not only do they help protect your cargo in the bed of your truck from the elements, but when you combine it with a locking tailgate, such as this one, it also protects your cargo and your tailgate from theft and tampering.What I personally like about the Revolver is the vinyl top on it really matches the plastic of our tailgate top here, and our bedsides really well. It looks like the Revolver was on the vehicle from the factory. Our cargo is going to be protected from the elements because we have nice, tight weathertight seals all the way around.
Access Tonneau Cover Manufacturer Installation - 2017 Honda Ridgeline
Speaker 1: Remove three bolts on each side wall of the box with a torques wrench. Test fit the side rail on the inside lip of the box. Push the side rail forward until it touches the front of the box, and adjust it flush and level with the top of the box. Clean inside edge of box rails with alcohol pad. Position the side rail tight against the front of the box, and flush with the box rail. Work from front to rear of the box.Next, position the front bracket with narrow slot towards the box wall.
DIY Install: BAKFlip F1 Hard Tonneau Cover on your 2012 Honda Ridgeline
Today on our 2012 Honda Ridgeline, were going to be installing the BAK Backflip F1 Hard Tonneau Cover in a folding design out of aluminum and fiber glass, part number BAK72601. Now that weve shows you what the tonneau cover looks like in the folded or closed position, lets go ahead and show you what it looks like in the stored or in the upright position, so you fold the tailgate down. Now to unfold the rear hatch or any of the hatch sections, you can pull on this cable right here that releases the locking mechanism, and you can open it up from either the driver or the passenger side.Now if you look up here, each of the other panels, it has this cable mechanism as well which unlatches the panel as you move forward. Again, you can open it from either side by simply pulling on the cable in order to release the locking mechanism. Well then take one of the pop rods. Youll fold it up, slide it underneath this plastic track here.
What our customers are saying:
"I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future."