# 1
Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof
This review covers the Rhino Rack 2500 Vortex Aero crossbars and associated parts (DK284, RRRLKVA, RRVA137S-2) for a naked roof installation on a 2018 Honda CR-V. Very solid racks. We just took our first trip using them and the didn't budge. As recommended, a few days after installing, I tightened the bolts a bit. I'm not sure they needed it--just a little insurance. The installation process was clear, but fairly detailed. It would be easy to miss a step, so take your time. Also, I tried a couple shortcuts in the order when installing on the car, but had to back track. So, go in the order they give you. The racks easily supported our filled "pod" and a couple surfboards, strapped side-by-side. Sorry, no photos of the rack loaded. One thing to watch out for is that our old Thule pod almost didn't fit because of the thickness of the racks. I had to loosen the bolts almost entirely. Of note: I feel that although I followed the measurements to the millimeter, the fit on our 2018 Honda CR-V wasn't exact. Where the pads sit on the roof of the car didn't align perfectly. I could have adjusted this by just re-trimming the rubber pads that go in the channels, but it's not a big deal, so I just left it. Finally, I do have one concern. The angle of final installation doesn't really protect the racks from theft very well. The plastic plate that locks over the screw would allow someone with the proper tool to get up under it and loosen the bolts. That being said, someone so inclined could also just break the little plastic door or drill a hole in it to access the bolt. So, I guess it's just a deterrent anyway. Overall, I'm very happy with the racks and etrailer.com! Despite shipping delays due to Covid-19, they were able to get the racks to me in time for an upcoming trip. I did choose to expedite shipping, but the cost was very reasonable.
The clamps fit well on my 2014 Honda CRV. I took my time reading the instructions and attaching the cross rails to ensure proper attachment, and found the fit to work great. The clamps work well on the contour of the CRV. I took a test drive, and did not encounter any problem. Aloha from Hawaii!
# 2
Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4
i George from etrailer, The rack is awesome! Strong, firm hold and nice looking. When doing surveys, I put my ladders on the rack. I highly recommend this etrailer.
I put 3 stars because its a useful functional non-harmful roof rack solution for my WRX sedan. This review lost 2 stars because the rubber top pieces get damaged upon any accessory removal or install like(bike, snowboard rails etc). Additionally, these accessories also look to be weathering quickly because of build quality. Hopefully this helps your decision! Thanks
# 3
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2
Perfect. Low Profile, Looks Good. Solid Rack System. Had a year and Highly recommend
Hi George from etrailer, The rack is awesome! Strong, firm hold and nice looking. When doing surveys, I put my ladders on the rack. I highly recommend this etrailer.
# 4
SportRack Semi-Custom Roof Rack for Naked Roofs - Square Crossbars - Steel - 45-1/2" Long
Easy to assemble and, solidly built. Very easy/fast to mount/remove after assembly. The instructions are not all that clear for assembly of the combined sr1003 sr1116. I hope this photo will help. Note that the rubber feet remain on the back bar that crosses the car, but the hook that goes under the door frame is transferred to the sr1116 front to back extender bar.
The rack was fairly easy to put on, do NOT over tighten the rectangular nuts on assembly. They are easy to strip. There are now backup nuts on all four bolts on our unit. Be careful to assure that the rubber pads are correctly positioned on the unit's "feet" before tightening it down on your roof. It looks good and on a recent trip from CT to TN and back, we got the best fuel mileage we've gotten since we bought our CRV over a year ago so it sure doesn't create a lot of drag! Once mounted it is sturdy and not unattractive although the side clamps do distort the door gaskets a bit which increased the wind sound level a bit. I think it is a good value if you are careful mounting it.
# 5
Rapid Traverse Feet for Thule Crossbars - Naked Roof - Qty 4
The whole experience was freakin awesome. * Ordered on-line, delivered when promised, all packages were in excellent condition, and all parts were accounted for - no shortages, THANK YOU! * The Thule roof rack design, quality of materials, comprehensive instructions were really impressive. Everything went together without a hitch and really looks good installed. * We plan on carrying our 12 1/2' SUP's on the roof rack when we head out to the lakes. * It saves us time as our SUP's are inflatable, however it takes a bit of time to pump them up once we get there. Now it's just loosen them up and we're ready to go. Great job etrailer, I would definitely buy more products from your organization!!
Etrailer helped me out of a jam as I could not find the Thule parts I needed. They not only had the parts but got them to me in a few days! Made my trip to Lake Placid possible! Fantastic communication and customer service.
# 6
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long - Qty 2
The crossbars came together with all mounting hardware, platforms and legs. Evertyhing arrived together in short time and was raasonably easy to assemble. The quality is good and solid, and all at a good price. A year later, they still look great and perform well. I highly recommend purchasing from etrailer.
2019 Jeep Grand CherokeePurchase for a 2019 Jeep Grand Cherokee, black rails. Perfect fit.
# 7
RCL Legs for Rhino-Rack Crossbars and Pioneer Platforms - Fixed Mounting Points - Qty 4
Roof racks work pretty well once I figured out how to correctly assemble them. The locks serve no purpose. You can get by them with an allen wrench. Had delivery problems that you addressed well.
Great bars. It's my second pair. Both on jeep Grand cherokee. The pair I put on my 2015 overland didn't whistle at all. This pair I put on my 2020 trailhawk whistled starting at 20mph and changed pitch throughout the acceleration process and while causing. I bought a fairing and the problem is solved. At least for now. I put the fairing on wit the label in. Looks better and Rhino Rack isn't paying me to advertise. The fairing they recommended seemed small but works so go with whatever they recommend.
# 8
Rhino-Rack RVP Roof Rack for Fixed Mounting Points - Vortex Aero Crossbars - Aluminum - Qty 2
Well packed, easy instructions, solid installation feeling with professional results. Dressed in business casual, I removed the covers and installed the racks in less than 30 minutes so we could drive it on the expressway and check for wind noise and no wind noise. The Allen wrench tool worked great, there was minor alignment on one nut, other wise, with a small flat headed screw driver to remove the covers, and a Phillips head screw driver to secure the bars, it was really straight forward and easy to get professional results. We just attached a hundred pounds of wood and it rode perfectly and again no noticeable noise or issues of any kind. I kept the heavy plastic packing and slit it to protect the bars from scuffing, wrapping the clear plastic and securing it with small strips of 3M duct tape and then remover them. We used one of the packing bags to place the instructions, the old covers, and the covers provided and the tool to store with the spare tire. Great design, we like the black, on a black car and it works great. Thanks for a great product and your video guides ensure even a first timer, has the confidence to do it and do it right. One recommendation: Deburr the inside of the aluminum extrusion (mounting bracket) and the tube slides in easily for everyone. Regardless, it went together with a little extra pressure.
Installation was easy, about 15 mins tops, solid product. I like how this fits seamlessly like it came with the CRV but of a higher quality.
# 9
Rhino-Rack RVP Roof Rack for Fixed Mounting Points - Vortex Aero Crossbars - Aluminum - Qty 2
Was a little intimidated when I saw all the parts but it came together nicely and appears quite sturdy. Strapped the paddle boards on top and took off!
The installation video is quite helpful, and I was able to install my new crossbars without any trouble. I highly recommend buying through etrailer.com - they have earned my business again!
# 10
Yakima RoundBar Crossbars - Steel - Black - 58" Long - Qty 2
Free delivery that showed up in 3 days!!! Can't beat it. The crossbars with the Control Towers and LandingPad 9 fit perfectly on my Honda Element. Had them installed in about 30 mins. Don't have my cargo box yet and wanted to test strength, so I had my 110lb wife standing on them with no issues (yes, the car was parked). Plan to take a long camping trip next week with a cargo box on top...wife will be in the vehicle:-)
works good
# 11
Fit Kit for Thule Podium-Style Roof Rack Feet - 3166
They work as designed. EAsy to install once one figures out where the attachment points on the Honda CR-V are..
These Thule roof rack rails are fantastic. I can easily and quickly add my ski and paddleboard accessories. Plus it's just such a sleek look!
# 12
Evo Clamp Feet for Thule Crossbars - Naked Roofs - Qty 4
Easy install, no issues with this roof rack in almost 1 year of using it
While the instructions were a bit difficult to follow the install videos from etrailer are a blessing to figure out what to expect even if not exact to the letter. Overall product is excellent, use it to haul kayaks and a 18 ft aluminum canoe to and from locations. Would recommend .
# 13
Rhino-Rack RVP Roof Rack for Fixed Mounting Points - Vortex Aero Crossbars - Aluminum - Qty 2
So far so good! Haven't loaded it yet but it is sturdy and solid. Everything came perfectly cut to fit, zero issues whatsoever! The rails were aftermarket and there were no issues with those being compatible with the cross bars either. Plan to add bike racks and cargo box. etrailer gets it right!
Pontiac Trans Sport VanEasy to install, it's very strong, easy to transport my kayaks, and my attached Thule Stackers work well with it. It's a great rack mounted on my factory Honda CRV roof rails.
# 14
Yakima RoundBar Crossbars - Steel - Black - 48" Long - Qty 2
I ordered the Yakima roof rack, with the Hullyrollers for the back crossbar and the Mako saddles for the front crossbar to use with my kayak. It arrived just like they told me and I put them on my car the eveningit arrived. Got to finlly use the roof rack on June 22 to go out kayaking and it worked great. Only thing is I did not know about the air reflector piece for the front crossbar. Now I will be ordering it to help with the wind noise.
Great rack, go on fast, easy to install and work well on my VW TDI wagon. Care has to be given and follow the instructions for the install to what type of rails you have. Works great carrying the VW luggage carrier and plan on using it to carry kayaks as well. Just have not decided what kayak rack type to get yet.
# 15
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2
robert s was terrific !!! excellent customer service !!! from assisting with a return, to recommending an alternative, to informing me about delivery status ... the yakima jetstream crossbars with baseline towers were a bit more complicated to assemble and install than the brand i returned, but the wind noise and whistling are dramatically less ... the next step is to select a cargo carrier ... it goes without saying that i will consult robert again ... thanks so much robert, and safe and happy travels to all
Ordered new towers and clips so as to use my old-school round bars (I bought these at least 18 years ago, maybe even earlier) and bike and canoe accessories on a new vehicle (naked roof 2018 CR-V). Installation was tedious, as usual, but not difficult and the written instructions were straightforward. Youtube helpful too but not necessary. Have hauled bikes and the canoe in high wind on the interstate (no more than 65 mph though) on the CR-V and so far so good. Have had excellent results with Yakima racks on 3 vehicles now (2 sedans and now the CR-V) over last 28 yrs. This is my first purchase through etrailer. Very pleased. Good price, excellent service online and via phone, rapid delivery. Highly recommend.
# 16
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2
robert s was terrific !!! excellent customer service !!! from assisting with a return, to recommending an alternative, to informing me about delivery status ... the yakima jetstream crossbars with baseline towers were a bit more complicated to assemble and install than the brand i returned, but the wind noise and whistling are dramatically less ... the next step is to select a cargo carrier ... it goes without saying that i will consult robert again ... thanks so much robert, and safe and happy travels to all
Ordered new towers and clips so as to use my old-school round bars (I bought these at least 18 years ago, maybe even earlier) and bike and canoe accessories on a new vehicle (naked roof 2018 CR-V). Installation was tedious, as usual, but not difficult and the written instructions were straightforward. Youtube helpful too but not necessary. Have hauled bikes and the canoe in high wind on the interstate (no more than 65 mph though) on the CR-V and so far so good. Have had excellent results with Yakima racks on 3 vehicles now (2 sedans and now the CR-V) over last 28 yrs. This is my first purchase through etrailer. Very pleased. Good price, excellent service online and via phone, rapid delivery. Highly recommend.
# 17
Fit Kit for Thule Evo Clamp and Edge Clamp Roof Rack Feet - 5046
Yakima clamps for a bare Honda CRV work great.
Once we got it correctly installed it stayed firm. We only have occasion to use it once a year for an annual trip. Although I think it reduces gas mileage, it's too much trouble to take down and put back up. It works fine to hold extra baggage.
# 18
Rola Rail Extreme RBE Series Roof Rack - Flush Side Rails - 47" Long
It’s a nice looking item, the only reason I’m giving it 4 stars is because on my 2016 CRV the piece on the front sits flush to the bracket in the contrary; the back piece has 1.5” of overhang on both sides. I guess I should have ordered the longer version instead of the 47”
How to Set Up Your Yakima RidgeLine Roof Rack for Flush Rails on a 2022 Honda CR-V
I'm Matt with etrailer and today we're talking about the Yakima roof rack on top of our 2022 Honda CR-V. And it's gonna be a great option if you're going on a trip and you need to store some extra luggage because maybe you have some friends and family with you and you can't put it on inside your vehicle, especially if you already have a hitch that's being used by either a trailer or something else or you don't have a hitch at all. And it's really gonna be good if you have any longer items that you can't fit into the back of your vehicle anyways. It's important you know what kind of roof you have, so way you can check is right now we do have a naked roof and that means we're not gonna have any type of rail on top. You can also get this vehicle with flush rails and that's gonna be something you'll be able to notice because you can get your hands around that and to make sure you're getting the right kit for you you can plug in your vehicle's information into our website before I find the correct fit for you. Speaking of the kit, up top we're gonna have our 50 inch JetStream crossbars.
How to Set Up Your Rhino-Rack RVP Roof Rack for Fixed Mounting Points on a 2022 Honda CR-V
Hey everyone, it's Evangeline and today we're taking a look at our Rhino Rack RVP roof rack system here on our 2022 Honda CR-V. So you've got your CR-V, you've got that versatility but what if you also wanna carry around some accessories like kayaks or a roof box or a roof basket. What you then need is a roof rack system. So this is a very sleek system. It's almost factory in how it looks but it also has a great weight capacity and allows you to carry those fun accessories. Now this depends on what trim of a CR-V you have because some have a naked roof where you do not have rails at all.
Setting up the Fit Kit for Thule Evo Clamp and Edge Clamp Roof Rack Feet on your 2021 Honda CR-V
Hey, everybody, how's it going Today we're gonna be going over and showing you how to install the Thule Evo Wingbar Crossbar System here on our 2021 Honda CRV. So this is what our system is gonna look like installed. Now, for starters, we have two different color options for the crossbars here. We have black which is what we have installed on the vehicle here. But there's also a silver crossbar option as well. Now it really just comes down to preference in which you feel matches your vehicle better.
Set up: Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs on a 2020 Honda CR-V
Hey, everybody. Today we're going to be going over and showing you how to install the Rhino-Rack Vortex Aero crossbar system here on our 2020 Honda CRV.So here's what our roof rack system is going to look like installed. As you can see here, Rhino-Rack uses these nice aero-shaped crossbars, which are going to do a couple different things for us. Number one, the aero shape is really going to help cut down on wind noise. We're not going to have that whistling sound here with our crossbars. And, number two, we're not going to have near as much drag.
Rola Rail Extreme RBE Series Roof Rack Installation - 2020 Honda CR-V
Ryan: Hey everybody. Ryan here at etrailer. Today on our 2020 Honda CRV, we're going to be taking a look at and showing you how to install the Rola RBE Series Roof Rack. Like most midsize SUVs, they're going to provide us with plenty of room on the inside to carry our friends and family, but really not enough to truly carry all the gear and extra things that we want to bring on our trip.Well that where the roof rack is really going to come into play. It's going to provide us with a area to mount other accessories like a roof basket, a kayak carrier, even a bicycle rack. And that's going to still have all that room on the inside for our friends, all while being able to carry our large accessories with us as well.And in my opinion too, even with no accessories on the roof rack, it actually makes the CRV look pretty good.
DIY Install: Fit Kit for Thule Evo Clamp and Edge Clamp Roof Rack Feet on your 2019 Honda CR-V
Today on our 2019 Honda CR-V, we're going to be doing a test fit on the Thule Wingbar Evo clamp-on roof rack system. This Thule roof rack system is going to allow you to carry roof-mounted accessories on your Honda CR-V, things like bike racks, kayak carriers, roof boxes, and more.The crossbars are 53 inches long and you can see how they span across the roof of our CR-V. We're going to be able to carry multiple accessories with this roof rack system. We've got the black installed, but they're also available in silver if that's something you're interested in. You can check it out on our website.They have an aerodynamic shape. These are going to be a lot quieter than your round or square bars.
Mount: Fit Kit for Thule Evo Clamp and Edge Clamp Roof Rack Feet on a 2018 Honda CR-V
So today on our 2018 Honda CRV, we're going to be doing a test fit on the Thule WingBar Evo roof rack system for naked roofs. Now with this system, it's going to allow you to carry roof-mounted accessories, things like bike racks, kayak carriers, cargo boxes, and more. Now the wing bars are 53" long. They're made out of aluminum, so you don't need to worry about any rust or corrosion. But you can see how they stretch out across the entire roof of our CRV. That way, we can carry more than just one accessory.
Does the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs Suit Your 2018 Honda CR-V
Speaker 1: Today on our 2018 Honda CRV we're going to be test fitting the rhino rack vortex aero roof rack system. This is going to consist of part number RRVA137B-2. These are the vortex aero crossbars that you see here. These also come in silver as part number RRVA137S-2. We'll also be installing part number RRRLKVA. These are the 2500 series legs for the vortex aero crossbars, excuse me, for naked roofs.
Thule Roof Rack Review - 2018 Honda CR-V
Speaker 1: Today on our 2018 Honda CRV, we'll be doing a test fit on the Thule Traverse roof rack system using part number THLB58, for the 58 inch square bars. These are also available as 50 inch cross bars with part number THLB50. We'll also be using the Traverse Foot Pack, part number TH480, and a Fit Kit for 2018 CRV, part number THKIT1855.The square bar roof rack system is an entry level option for your CRV. It's going to allow you to carry bike racks, cargo baskets, cargo boxes, and much more. It's not as aerodynamic or as quiet as Thule's Aero crossbars. You can pick up a fairing for this roof rack system with part number TH8701.
How Does the Yakima RidgeLine Roof Rack for Flush Rails Fit on a 2017 Honda CR-V?
Speaker 1: Today on our 2017 Honda CR-V, we're going to be test fitting the Yakima JetStream roof rack system. This is going to be consisting of part numbers Y00425, these are the JetStream crossbars. Part number Y00148, these are the SkyLine Towers, and they kind of snap into place with our landing pads. And the landing pads are going to be part number Y00245. This is specifically for the Honda CR-V.It attaches to two pre-attachment points on the actual flush mounted side rails of your CR-V, and these bars are designed to work with a wide variety of accessories. This helps you put anything you don't want inside the vehicle, outside, or just to free up a little bit more space if you need to.
Setting up the Thule WingBar Evo Roof Rack for Naked Roofs on your 2016 Honda CR-V
Today on our 2016 Honda CRV, we're going to be doing a test fit on the Thule WingBar Evo podium roof rack system. I've already got it set up just to give you a good idea of what it looks like, but this system is specifically designed to mount to your flush-mounted rails on your roof. It is a fixed mounted system. This is going to allow you to carry roof-mounted accessories, things like bike racks, kayak carriers, cargo boxes and more. It features 53"-long crossbars. You can see here how they span across the entire roof.
How to Install: Rhino-Rack RVP Roof Rack for Fixed Mounting Points on your 2016 Honda CR-V
Today, in our 2016 Honda CRV, we're gonna be doing a test fit on the Rhino-Rack RVP Fixed Mounted Roof Rack System. I've already got it installed just to give you a good idea what it looks like, but this system is designed to mount directly to your flush mounted rails on your CRV. You're gonna be able to carry roof mount accessories, things like bike racks, kayak carriers, cargo boxes, and much more. Now, as I said, it's a fixed mounted system, which means it's not gonna be adjustable along the rails like other roof rack systems. The crossbar spread center on center is around 31 and three quarters, so you want to be sure you choose accessories that are going to work with that spread. Now, the crossbars offer about 38 inches of usable space.
How to Install: Rhino-Rack Vortex Roof Rack on your 2016 Honda CR-V
Today, in our 2016 Honda CR-V. We're going to be doing a test fit on the Rhino-Rack Vortex Aero Crossbars Roof Rack system. This system is specifically designed to fit your flush-mounted rails on your CR-V.With it in place, you're gonna be able to carry roof mount accessories, things like bike racks, kayak carriers, cargo boxes, and much more.Now, the aerobars are 49 inches long. You can see how they span across the roof of our CR-V. This is gonna allow us to carry multiple accessories on our roof. So maybe we'd like to carry two to three bike racks up there, or maybe even two kayaks.Now, the crossbars are made out of aluminum, so we don't have to worry about any rust or corrosion.
Yakima Roof Rack Review - 2016 Honda CR-V
Today on our 2016 Honda CRV, we're going to be testing the Yakima round bar roof rack system, consisting of part numbers Y00409, these are the round 58 inch cross bars, part number Y00146, these are the baseline tower for the Yakima cross bars, and part number Y03536, which is the round bar SL adapter kit for the Yakima baseline towers, and part numbers Y06148 and Y06152, which are the base clip fit kits for the Honda CRV. The Yakima round bar roof rack system is great for carrying a wide variety of accessories on your roof while freeing up space inside your vehicle for you and your family. The two bars have a combined carrying capacity of 165 pounds although you always want to double check with your vehicle's manual to make sure your roof can withstand that weight. Both of the end caps do come with knock outs which you can replace with the Yakima same key system so you can actually utilize this with your Yakima accessories and make everything key alike. Now that we've gone over some of the features of the roof rack system, let's go ahead and show you how it installs. We have our rear bar partially assembled on our table here, and our next step is to install our base tower to the other end of our bar. So we'll take our baseline tower, take this plastic adapter piece, and that gets pushed on the top here till you hear a couple clicks. Then we'll take our round bar adapter, place that, line up with the screw, then we'll come around to the front of the baseline tower, pull this portion out so we can see the screw that we need to tighten down with our included tool.
Install: Yakima CoreBar Crossbars on a 2016 Honda CR-V
Today on our 2016 Honda CRV we're going to be test fitting the Yakima Core Bar Roof Rack System consisting of part numbers Y00422, these are the Yakima Core Bar Crossbars, 60" long. Part number Y00146, these are the Baseline Towers for the crossbars. Part number Y06148, and part number Y06152. These are the Base Clip Fit Kits for the Honda CRV. The Yakima Core Bar Roof Rack System is great for carrying a wide variety of accessories on your roof while freeing up space inside your vehicle for you and your family. It has a carrying capacity of 220 pounds with the two bars, however you always want to double check with your vehicle's manual to make sure your roof can withstand that weight. It's fairly easy to install, simply clamps onto your roof, the instructions have all the measurements that you'll need.
Yakima Roof Rack Review - 2016 Honda CR-V Y00146
Today on our 2016 Honda CR-V, we're going to be test fitting the Yakima JetStream Roof Rack System, consisting of part numbers Y00426. These are the Yakima JetStream Crossbars 60" long. Part number Y00146. These are the BaseLine Towers for the Yakima Crossbars. Part number Y06148 and Y06152, which are the BaseClip Fit Kits for the Honda CR-V. The Yakima JetStream Roof Rack System is great for carrying a wide variety of accessories on your roof while freeing up space inside your vehicle for you and your family. The two bars have a combined carrying capacity of 165 pounds, although you always to double check with your vehicle's manual to make sure your roof can withstand that weight. It has a rubber strip on the top of it, which means you can use T-Track accessories with it, and that coupled with the shape of the bar, will reduce wind noise and drag while you're driving.
Rhino-Rack RSP Roof Rack Installation - 2016 Honda CR-V
Today in our 2016 Honda CR-V we're gonna be test fitting the Rhino Rack RSP Roof Rack System for Flush Factory Side Rails, part number RSP33. The Rhino Rack RSP Roof Rack is great for carrying accessories on your roof and freeing up space in your vehicle for you and your family. It can carry a wide variety of objects, from bike racks to roof baskets to roof boxes to ski and snowboard carriers, as well as water sport carriers such as kayaks and canoes. The bars themselves have a nice sleek look to them, and since they install directly into your flush rails, they actually look like they're factory installed. Rubber vortex strips combine with the aerodynamic shape of the bars will cut down on wind noise and drag while you're driving. Since it has these strips in the center here, you can actually remove these and use T-Track accessories with this roof rack. The carrying capacity of these two bars is gonna be 165 lbs, although you always want to double check with your vehicles manual to make sure it can withstand that weight. Now that we've gone over some of the features of the roof rack system, let's go ahead and show you how it installs. This is gonna be attaching to fixed points on our flush rails, and here is the rear bar that we're gonna be installing.
Fit Verified: Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs on a 2016 Honda CR-V
Today on our 2016 Honda CRV we're doing a test fit of the Rhino Rack Vortex Arrow crossbars. The crossbar part number that we're using today is RRVA137B-2. For our foot pack here we're using RRLKVA, and for our fit kit for our CRV we are using part number DK284. Now, here we have our back crossbar. We already have our front crossbar on and secure. We're going to start with this one here, and we're going to show you how to put our last foot pack together with out fit kit, and then show you how it goes on our vehicle. We're going to start off by taking this bottom portion of our foot pack, and it just pops off just like that.
Rhino-Rack RS 2500 Vortex Aero Roof Rack Installation - 2015 Honda CR-V
Today on our 2015 Honda CRV, we're going to be test fitting the Rhino-Rack RS 2500 series roof rack system part number RRRS409B. They're also available in silver, part number RRRS409. The Rhino-Rack RS roof system is great for carrying a wide variety of accessories on your roof while freeing up space inside your vehicle they can carry bike racks, cargo baskets, and closed cargo boxes, ski and snowboard carriers as well as kayak carriers. The two bars have a combined carrying capacity of 155 pounds although you should always double check with your vehicles manual to make sure your roof can withstand that weight. It does have the Vortex aero strips on the top and that coupled with the shape of the bar itself does cut down wind noise and drag while your driving. It also makes it capable of being used with T track accessories. Now since these are flush as you can see here, you're not going to be able to extend out further.
Does the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs Suit Your 2015 Honda CR-V
Today on our 2015 Honda CRV, we're going to be test-fitting our Rhino-Rack 2500 Series square-bar roof rack system, part number DS1375B. These are the square crossbars, 54" long and part number DK284 and this is the custom fit kit for the CRV. The Rhino-Rack square-bar roof rack system is great for carrying a wide variety of accessories on your roof while freeing up space inside your vehicle. You can carry bike racks, cargo baskets and closed cargo boxes, ski and snowboard carriers as well as kayak carriers. The two bars have a combined carrying capacity of 165 lbs, although you always want to double-check with your vehicles manual to make sure it can withstand those weights. While these are square bars there are fairings offered on etrailer.com, which you can purchase separately and that will cut down the wind-noise sound and the drag while you're driving. All the legs on our roof rack system do lock, so once you install this onto your roof, it's secure to your roof as well. Now that we've gone over some of the features of this roof rack system, let's go ahead and show you how it installs.
Compatible? Yes! The Rhino-Rack Vortex Aero Crossbars Fits a 2015 Honda CR-V
Today on our 2015 Honda CRV, we're taking a look at the Rhino Rack Vortex Aero Crossbars. The part number for the crossbars you're using today is RRVA137B-2. The foot pack we're using is RRRLKVA, and our fit kit is part number DK284. We already have our front crossbar in place on our vehicle. We're going to show you how to put together our back crossbar here and how we put together that last foot pack as well. Everything you see here comes with the kit.
Thule AeroBlade Edge Roof Rack Installation - 2015 Honda CR-V
Today on our 2015 Honda CR-V we're going to take a look at the Thule AeroBlade Edge Roof Racking System with the fixed points. The part numbers for the AeroBlades are TH7602-2H7603, and our Fit Kit is 2HKIT3118. I have the first one already on, on our front one. I'm going to show you how we install this second one. I'm going to show you all the hardware that comes with it. With our Fit Kit we have our rubber padding with our metal plate.
Installation: Rhino-Rack ROC25 Roof Rack for Naked Roofs on a 2014 Honda CR-V
Hi everybody, Adam here with etrailer. Today we're gonna be taking a look at the Rhino-Rack Vortex Aero Roof Rack system, for your naked roof, on your 2014 Honda CRV. If you're looking for a fairly cost-effective roof rack, that has all the features that I really look for, in a roof rack system, I definitely think that the Vortex Aero Rhino-Rack Roof Rack system, is gonna be good for you. We're going to be able to put about 165 pounds worth of stuff on top, we have T-Tracks, it's made of aluminum, it's not gonna rust away, and it's just gonna allow your CRV, and the people you're driving around, to do more. Some things that you don't see with some roof racks is locks, these come with it. Even some of the higher end racks, you really have to purchase the lock separately, which is kind of silly in my opinion, but this one comes all with it, you don't have to buy anything separate.
Fit Test: Inno Aero Roof Rack for Naked Roofs with 2014 Honda CR-V
Today on our 2014 Honda CRV we are going to be test fitting the inno roof rack system. This is going to be consisting of part numbers INXB108-2. Those are going to be the crossbars. Part number INXS200, those are going to be the flush feet. Part number INK413 and that's going to be the clamp that holds it onto your vehicle. We already have the front one installed. You can see it has a nice shape to it.
Fit Test: Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs with 2014 Honda CR-V
Today on our 2014 Honda CR-V we're going to be test fitting the Rhino-Rack Roof Rack System, consisting of part numbers RRVA137B-2, those are going to be the cross bars, part number RRRLKVA, and those are going to be the legs, and then part number DK284, and those are going to be the clamps holding it to your vehicle. We have the front one already installed. As you can see it has a nice aerodynamic shape. Let's go ahead and show you how the rear one goes on. We have it partially assembled on our table here already, with the parts laid out. Let's get right into it. We'll first take our leg, flip this around here so you can see a little bit better. This metal bracket here is going to slide into this channel here.
What our customers are saying:
"You folks are fast. Thank you very much."