# 1
ONE LED RV Combination Tail Light w/ License Plate Bracket - 4 Function - 1 Diode - Driver Side
It was an exact replacement. Works great. Thanks
Terrific upgrade in my opinion. The installation was pretty easy for me. The light is slightly smaller than the original and I have the corrugated sheet metal siding I did not experience any led hyper flash with this light. I was slightly concerned about this after seeing videos of people changing to led light bulbs on the tow vehicle. This light was plug and play. 4 stars because the manufacturer did not provide a wiring diagram :( I don’t feel you should guess what wire goes where. The least they could do is tell you what they (the manufacturer) wired for ground. In my case, the white was ground, same as my trailer wiring. However I needed to connect green to black to get my turn signal to work. Your situation may be different. Would I buy it again? At this time, yes. I’m hoping this light outlasts my usage of this travel trailer- which should be for many years.
# 2
ONE LED RV Tail Light - Brake, Tail, Turn - Passenger Side - Rectangle - Surface Mount - Red
Perfect fit replacement for my 2016 puma canyon cat
I had requested 2 day delivery and the product arrived on time. It was very easy to install. I am happy with this product.
# 3
RV Tail Light - Stop, Tail, Turn, License Plate - Rectangle - Red Lens - Driver Side - White Base
Standard incandescent tail lights.. painted my 2018 Dutchman lite. We downsized from a 45’ Class due to age a medical needs. Like the ease of small trailer but miss terribly the luxury of my class A. We’re planning on much closer destinations. E trailer and I go back over 14 years. They are knowledgeable and rarely make mistakes causing you time going down the road# 1 ??
Used same color wiring scheme as existing and couldn't see the blinker blinking. The tail light was too bright. Flipped non ground wires and then it worked. However, broke the left tab getting the lens off. Way too tight and not enough give. Will go to dealer next time for parts. Will use some adhesive to hold it on...but for how long.
# 4
Optronics Backup Light for Trucks or Trailers - Submersible - Incandescent - Oval - Clear Lens
The light has no apparent mounting method. No screw or bolt holes. Can’t drill mounting holes without removing the lens, which appears to be unremovable.Makes sense, it’s watertight. No instructions at all. My previous purchases at strainer have always been satisfactory, at the very least. I’ll have to return this one.
Best interior lighting
# 5
Optronics LED Clearance or Side Marker Light w/ Reflex Reflector - 6 Diodes - Oval - Amber Lens
These exactly match the originals on our 1973 Airstream.
These worked great at upgrading my old trailer marking lights. Still working great a year after install.
# 6
Incandescent RV Tail Light - Brake, Tail, Turn - Passenger Side - Rectangle - Surface Mount - Red
I couldn't find taillights for a 50 year old Shasta travel trailer,so I bought these. The wiring is little different but these will work.
Light arrived within a day or two of order. Perfect match to OEM light currently on trailer. Easy to install. Very satisfied with product and service.
# 7
LED Trailer Clearance or Side Marker Light w/ Reflex Reflector - 3 Diodes - Black Base - Red Lens
The picture that was used for the side light was spot on. I received exactly what I wanted finally, was Little Disappointed on the length of time to receive it
Item arrived in neat packaging. Was as described. I installed same day on my travel trailer. Now I have better visible marker lights.stock lights were dim at best, these lights are far brighter. Service and follow through from Etrailer is truly the best.
# 8
LED Trailer Clearance or Side Marker Light w/ Reflex Reflector - 3 Diodes - White Base - Red Lens
Replaced all the clearance/marker lights on my 2007 RV. Nice upgrade to the LED and very easy installation.
The clearance lights work perfectly. The sales lady went above and be beyond to make sure they were correct. She even went back in the data and found a previous order I made. Very professional!
# 9
Low Profile LED RV Tail Light w/ License Bracket - 4 Function - 12 Diodes - Black Base - Driver Side
First unit arrived broken and was replaced by etrailer no problems. Many thanks to everyone at etrailer.
My replacement lights came quickly and were quite easy to install.
# 10
Optronics Flexible LED Light Strip - Weatherproof - White - 17' Long
Replace the LED strip under my Awning on my Jayco trailer with these and used shrink tubes to make the connections water tight also . Work really great!!
Great service! My order was shipped the same day as my order. The lights are high quality for a good price. Will definitely be using etrailer for my rv needs.
# 11
LED Trailer Tail Light with License Bracket - Stop, Turn, Tail, License - Red Lens - Driver Side
Tail light delivered on time and easy to install . LED’s much brighter and visible than the original incandescent bulb. Nice lights!
1st light had a problem but etrailer replaced it. New one works great. Etrailer customer service is the best thank y’all
# 12
Incandescent RV Tail Light - Brake, Tail, Turn - Passenger Side - Rectangle - Surface Mount - Red
This one was much better, although had to switch wires around.
This product was received in perfect condition and was exactly what we ordered. This is the exact product on our trailer now and we were pleased to find a replacement at such a reasonable price. Unfortunately, when we attempted to remove the lens from the base, one of the clips broke. I just ordered another one. Fingers crossed it doesn't break this time.
# 13
Low Profile LED RV Tail Light - Brake, Tail, Turn - Passenger - Rectangular - Surface Mount - Red
Bright….! The exact replacement.
they fit, water proof tape needs to be included for the price.
# 14
Triple LED Trailer Tail Light - Stop, Tail, Turn, Backup - Red and Clear Lens - Qty 1
Quite easy to install and fit my Coachman Freelander perfectly. The prior ones were not sealed, filled with water, and blew the fuse fuse. Beware of the cheaper version on Amazon as they have the same poor seal problem as the original lights which died after <5 years.
Command Triple LED Tail Light Review They work great once they are installed. I have 2002 Gulf Stream Ultra on a Ford E450 Frame. The problem is the actual installation. Command does not include install instructions. What may needed if converting from incandescent bulb to a LED system is a 12 Volt 50 Watt 6 Ohm resistor. Installing a resistor parallel between the Brake/signal and Common wire will be necessary to overcome the hyper-flasher bulb out detection system. This high power resistor needs to be mounted on a metal surface to help disapate the heat created. In my case, I mounted the resistor to 3/4 metal pipe banding. The resistor was suspended so that is would have great air flow. Furthermore, size of the light should be slightly larger than 14 w x 6 7/8 . In my case the tail light was not big enough to cover the old light screw holes. I made this work by centering the light and using lap sealant as a finishing water proof bead. After a long road trip and many signal turns and brake presses the tail lights do look and work great.
What our customers are saying:
"Dude, That was FAST! Thanks a million. I just found my new place to get stuff for my trailer! Outstanding! Nick"