# 1
TruXedo TruXport Soft, Roll-Up Tonneau Cover
I was extremely pleased with the cover itself and how easy it was to install.
I absolutely love this cover. I had to remove it for a slide in camper that I bought and I was worried about putting it back on. I put it back in a couple weekends later and it’s still just as nice as the day I got it. Anytime I roll it up and have to roll it back out I always make sure I pull it tight and press down all the Velcro. I would highly recommend it.
# 2
BAKFlip G2 Hard Tonneau Cover - Folding - Aluminum
2019 Dodge Ram PickupWe purchased the BAK Industries BAKFlip G2 Tonneau Cover for our 2019 Ram 2500. We use this cover for security/keeping the weather off of our camping accessories for our RV. The cover works great and is fairly waterproof. The only issues we have had is the 1st latching cable, most of the time we need to pull the cable release from both sides to release the locking lugs to open. Over-all a good purchase, and would recommend it for anyone looking for a hard cover.
Overall, a good product. This is the third BakFlip I've owned on different trucks. Quality wasn't as good as older units. The wires to release the latches are too long and get trapped inside the cover so you can't reach them. I added pieces of tape to fix this problem. Also, the nylon straps to hold it open are a nice addition but the plastic buckles broke almost immediately. Older units with metal rings for you to attach bungee cords was a better design. As always, etrailer service & delivery are outstanding!
# 3
TruXedo TruXport Soft, Roll-Up Tonneau Cover
Replacement cover to the original, which was also from etrailer, being vandalized !
Great tonneau cover … perfect fit .. easy install, and works perfect with fifth wheel hitch versus folding type bed cover .. we camp a lot do this cover has been opened and closed very frequently and Velcro hiking up great …. Great product and highly recommend
# 4
TruXedo TruXport Soft, Roll-Up Tonneau Cover
Although my truck is garaged, this is a quality Tonneau Cover. It was easy to install and it keeps my truck looking neat and clean and provides better gas mileage. When you want it out of the way, simply pull the release latches after letting down the tail gate and lift it to release the velcro and proceed to roll it up behind the cab where it has 2 hooks and a rubber strap to secure it. I love it!
Works great!
# 5
TruXedo TruXport Soft, Roll-Up Tonneau Cover
No issues yet... Works and fits wonderfully
The cover was easy to assemble and of good quality. The cover is very taut and looks great.
# 6
TruXedo TruXport Soft, Roll-Up Tonneau Cover
Fit very well and looks great. Only issue is that the stake holes are visible (about a small 1/4" on each side) About 1.25 to install
Photo of cover installed.
# 7
Bestop EZ Fold Folding Tonneau Cover - 2009-2017 Ram 1500 and 2010-2014 Ram 2500/3500 6.5' Bed
2016 Ram 2500 6.4 bed fits great, looks great, and very easy to install and operate and remove!!! etrailer.com great to work with. This item was on back order and etrailer.com kept me updated with emails and phone calls
Extremely happy with the Tonneau cover. The cover was very easy to install, and equally due to its design, it will be easy to remove when needed. And oh yes, it looks great on the truck. :-)
# 8
TruXedo Lo Pro Soft Roll-up Tonneau Cover - Black
# 9
Bestop EZ Fold Folding Tonneau Cover
# 10
Access TonnoSport Soft, Roll-Up Tonneau Cover
Still is great looking after a year fits tight and easy to use rain or shine.
# 11
Access Vanish Soft, Roll-Up Tonneau Cover
Thank you for the note and reminder. Yes. I have had the tonneau cover on my truck for the past year, or so. And, yes. I absolutely love it. I have recommended your outlet to several of my truck owning friends, as I can't imagine a better value than what I got from your company. Looks really good too! Thank you for your support!
# 12
TruXedo TruXport Soft, Roll-Up Tonneau Cover
Great product. Use it all the time keeps thing dry in the Oregon rain. Easy to role up or extend back out.
The locking mechanism totally shattered on one side and the lock broke on the other side. Useless piece of junk Han going in my garage.
# 13
Access Vanish Soft, Roll-Up Tonneau Cover
Fast shipping and item was as described. Cover has a precision fit and looks great!
Mostly a pretty good cover for the price. The clamps for holding it on are a weak point as they come loose once in a while and are hard to get on and tightened well.
# 14
Access Vanish Soft, Roll-Up Tonneau Cover
# 15
BAKFlip G2 Hard Tonneau Cover - Folding - Aluminum
Ram 2500I loved this cover so much that I bought another for my newest Chevy 2500 HD. Fits perfect, keeps things in my truck bed secure and protected. Easy installation with easy-to-follow directions.
# 16
TruXedo Lo Pro Soft Roll-up Tonneau Cover - Black
Looks great! Easy installation too. I also like how the cover stows when rolled up to the front of the truck bed. The small sized roll doesn't block my view when hooking up my 5th wheel trailer. Overall, I've been very happy with this cover.
It was delivered way ahead of schedule! My wife and I installed it in less than 45 minutes, and it looks and works great!
# 17
TruXedo TruXport Soft, Roll-Up Tonneau Cover
It has held up well. Sides stick properly and back latches. Keeps most of the water out. It has been good for my light-to-regular use.
fit's just right looks good, use a good cleaner for the type of material and it will last for years I live in Arizona lots of sun no fading or cracking James
# 18
BAKFlip F1 Hard Tonneau Cover - Folding - Aluminum and Fiberglass
Easy to install, largely but not completely weatherproof. The cover has been installed for a year on a truck that sits outside with no fading or deterioration evident. It could do with a couple more rivets that hold the wire to the release mechanism near the tailgate as the plastic tubing occasionally pops out of the track that holds it in. It is easy to pop back into place though.
# 19
BAKFlip FiberMax Hard Tonneau Cover - Folding - Aluminum and Fiberglass
i have had the BAKFlip FiberMax Hard Tonneau Cover for one year now and the paint has begun fading to the point that the fiberglass is showing through the exterior coating.
# 20
Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover w/ Contractor Rig Rack - Aluminum
Extang Xceed Hard Tonneau Cover Installation - 2013 Dodge Ram Pickup
Adam: Hi, guys. Adam with etrailer.com. Today we're going to be taking a look at the Extang Xceed Fold-Up Tonneau Cover on our 2013 Ram 2500.So, walking up to my truck, I can hardly really tell it's there. It doesn't sit too tall, but it definitely goes with the black theme of the truck, and I'm definitely, definitely happy with it. So let's just go ahead and take a trip down the road and see how it goes.I've had multiple tonneau covers on my trucks. This one was a no-drill install, which was nice, and you got to remember you go to be happy with the look of it too.
Beginner’s Guide to Installing the BAKFlip F1 Hard Tonneau Cover on a 2011 Dodge Ram Pickup
Today on our 2011 Dodge Ram pickup well be installing the Bakflip F1 hard tonneau cover, part number BAK72207RB. Lets go ahead and go over the operation of our new tonneau cover. Well simply open the tailgate and release the tonneau cover locking cable. Each section has a set of locks and cable so well release each one as we fold it up. Then well fold it up to the cab and install the rods to secure it. Rotate it up underneath the rod lock, loosen the hand knob, shift the slide down onto the rod and then tighten down the knob.
Setting up the Bestop EZ Fold Folding Tonneau Cover on your 2009 Dodge Ram Pickup
Today, on our 2009 Dodge Ram Pickup 2500, we'll be installing the Bestop EZFolding Tonneau Cover, part number B1623901.Now, with our tonneau cover ready to be installed, we'll first remove the sealprotection, which is the white stripping along the outer edge. Now, with that removed,we'll go ahead and set the tonneau cover in position. When setting it in position, we'llalign the long edge with the front rail nearest the cab, and the short edges will line upwith the side rails that extend to the rear. And then we'll go ahead and get underneaththe tonneau cover, rotate the clamp down, and slide it over to the side rail. Then we'llrotate it until we pick up any extra slack and lock it into the inner lip of the bed rail.Now we'll go ahead and repeat the same process on the opposite side.Now, with both front clamps secured, we'll go ahead and fold the cover out. Onceagain, we'll go ahead and repeat the same procedure of pulling the clamps down,sliding them out into the bedrail, rotating them until we take up any extra slack, andthen locking them into position.
BAK RollBAK G2 Hard Tonneau Cover Installation - 2003 Dodge Ram Pickup
Speaker: Today on our 2003 Dodge Ram pick-up, we'll be installing the Bak G2 Hard Tonneau Cover Part #BAKR15204. Our first step of this install is going to be mounting the aluminum hanger brackets with the self-tapping screws provided. When we install them we'll have them tight to the bulk head of the pick-up bed. Once we have them in position we'll go ahead and use our self-tapping screws to secure them. Next we'll need to install the canister that houses the roll-up cover. It'll sit on the top of the aluminum brackets we've just installed, keeping the back edge of the bracket even with the back edge of the canister. Then we'll take a self-tapping screw, go down through the pre-drilled hole down in the canister bracket down into the aluminum bracket we installed on our bed side. We'll go ahead and put our rail up into position with the tailgate closed.
What our customers are saying:
"very easy to shop"