Most Popular Fits 2-1/2 Inch Hitch for Chevrolet Silverado 2500

Hitch ball and mounts all ready to the test!!! Great Products!! Five Star e-trailer team, very informative, fast and accurate shipping, perfect packaging and "GREAT" customer service"

This review does not just serve my recent order, but all of the orders before it. I have purchased a number of items from etrailer and everything was sent in a timely manor as stated and promised. All of the items I received were exactly as described. I watched a number of videos, read a number of diagrams and all of the help information was exactly what I needed. In other words I did not need to go anywhere else to get a full tow package for a Dodge 5500 that did not have one. I cannot say enough about how this website helped me. Also the pricing was about the best I could find and I did a lot of searching to make sure. This is a top notch site and I will absolutely come back here for my future towing needs.

Nice hitch very adjustable use it to to pull Diamond C 208 lpx trailer with a kubota SVL 90-2 skid steer close to 16000 lb

It's great having the hitch always attached to the truck. It's just there when you want it, stowed and out of the way when you don't. I wish they had a one-ball version as I haven't needed both, yet.

This forged ball mount was not machined flat around mounting hole. I had to grind a flat surface for proper fit.

Excellent product great performance have putting it to work towing 10k no problem love it

you did a great job sending out the hitch that we ordered and ups saw that we got it. Thanks so much for the time and effort you put into this order.

Great service

Went with the B&W due to the length of the shaft going into the receiver. My 2024 Ram's receiver is recessed under the bumper. This hitch is long enough to accept my Towtector product. Similar to Rock Tamers. Also, Brittany in customer service was awesome to work with as she guided me towards the product that worked for my application.

This ball mount is extremely heavy duty. I had a stock class IV hitch and aftermarket ball mount on my Ram 3500 SRW and it was bending towing a 14000 lb dump trailer. I upgraded to a class V hitch and this mount and it's working great. I have 6 trailers that I pull with gooseneck, 5th wheel and ball hitches. The only 1 that uses 1 7/8" ball is a little 5x8 utility trailer that I'm converting to 2" so I got the 2 ball instead of the 3. When turned sideways it works as a step to get into the truck but only if the tailgate is up. It doesn't stick out far enough when the tailgate is open. The reason for 1 less star is the documentation; you need more information to make the best choice. I originally ordered a different PN and it hung way too low bc is mounted under the existing hitch. To remove the stock hitch, you also remove the integrated mounting brackets for the bumper. I ordered a PN for a truck without a hitch and cut off the receiver tube with a torch. Also, I upgraded the 3 1/2" exhaust to 4" and now at idle the exhaust rattles on the much larger frame of the class V but a slight modification in planned to take care of that. Installation was fairly straighforward once I removed the original receiver tube.

Just received this mount and did the test fit with our trailer. We have not hit the road with it yet but I am confident it will perform perfectly. I am anxious to see how the cushioned feature works. We pull a box cargo trailer for business and just got a new Chevy HD pickup to tow with. It has a 2.5" receiver and hitch height is much greater than the Suburban we were using plus it had a 2" receiver. This mount is rated for far more weight than we will ever need but it was the only 2.5" size with 6" drop that I could find. We are very pleased with the product and the excellent customer service we got at etrailer. Thanks to everyone there for the very fast service and for keeping me informed as to the status of my order. well done!

These hitches are the best! And I scanned the world over to find only hitches that are made in USA like I do every product I buy. This is a very ingenious design that allows some shock absorption that greatly quiets any trailering. I bought two full hitches one for each ball size so that I would never have to change ball again! Great product!

Solid hitch! If you haul heavy loads and worry about you current hitch, this is the one you need to remove those concerns.

If own a truck with a 2 1/2 hitch box this is the tow hitch ball kit! This is the Hulk of hitches! Great quality and durability. There is nothing I can tow or pull out of out of a muddy ditch! I’ve owned many truck and bought hitches. This is my first time with a 2 1/2 box and I feel very confident. The best hitch I’ve ever owned!

The hitch is not as long as it seems in the picture. When installed it extends about 8” from the face of receiver to center of ball. I was hoping for something that was about 10-12” away from receiver. The pin hole is 4.5” from rear. Quality and finish are excellent, the drop is built with 1” plate and the ball hole is 1 1/4”.

I am pleased with my purchase and Teresa at etrailer. I purchased the wrong hitch and had to reorder. I did not allow enough drop and it was my fault. I will keep the other one for different applications. Submitting photos of both.

It now makes it so I can pull anything except a 5th wheel. It will make it great on the ranch.

This is a heavy duty combo pintle / ball mount. It is replacing one that failed at the welds. Since this is a solid piece with no welds I expect many years of use.

Looks fantastic! Easy to adjust. Works like it should. I would recommend this product. Only negative would be that I cannot lower my tailgate with this ball mount as it is tighter to the truck than most. I drive a 2018 Ram 3500

Great service.

Allows quick adjustment for my assorted trailers. No problems. I recommend.

Very happy with the hitch. Looked FOREVER all over for details when I got my new to me 2017 Ram 2500. This truck sits so dang high off the ground (4x4) I was worried about getting the proper range of drop for my different trailers. I used my 7x14 utility trailer as my baseline as it rides the lowest. From ground to bottom of my ball coupler is approx 16in. From ground to top of my hitch receiver is approx 25in. On the lowest setting my trailer sits ever so slightly nose totally empty. Check the pic with level. Once loaded I'm confident it will ride very nice. Plus I have all the range to move up for my taller trailers. Super beefy, seems well built, and I picked up the locking pins to go with. Etrailer as always had a great price and I've been ordering from them for years.

Unit was well packaged and fit and finish was perfect. Look forward to using it for many years! I have turnover ball in bed of my truck that’s at least 15 yrs old works perfect! B&W make the best towing products! Also have companion fifth wheel! Can’t say enough! I will always use B&W

Got mine today looks very heavy duty and built well!

Perfect, my second GenY Torsion hitch. Upgrading to the 21K from the 16K. There's not even a close second.

I have yet to tow with this hitch because I just received it today. Upon receiving the box I knew this hitch was not for the faint of heart. It felt like a massive hitch weighing in at 118lbs. Taking it out of the box I could see that this hitch is built like a beast and will likely be more hitch than I will ever need, but I needed a drop hitch and after asking etrailer questions and doing my own extensive research, I decided this was the hitch I should buy. I like the fact that it will give a little more space between the trailer and the truck, it can be used as a pintle setup if the need arises, and it comes with two ball sizes. Using this for my enclosed landscape trailer I am hoping it extends the life of tires and suspension components. I will try and update in the future after towing with this hitch.

My third one of these, I feel they help take shock out of towing. Just bought a extra one instead of changing balls all the time.

I own a couple of these in different drops and really prefer them over solid mounts. The cushioning does help protect the driveline of the tow vehicle and removes the harshness sometimes related to towing a trailer. Not cheap but well worth it to me.

Awesome hitch, love that I don’t have to worry about my multipro tailgate getting a dent in it…expensive but worth every penny for peace of mind!!

Great quality drop hitch, works great with my multipro tailgate! Quality product/tight tolerances, there is hardly any rattling which is amazing. Towed an 18 ft cargo trailer 500+ miles through the VA mountains with no issues. Worth every penny so far!

I will be using Etrailer for every trailer/ towing part that I'll ever need again. Great service and communication, kept me informed on every step of the process. I ordered my parts on Monday afternoon, received them Wednesday. I could not be more satisfied.

I was unable to find the correct size hitch in my small town, so I purchased the hitch, ball and pin from etrailer. The items were received in a timely maner and were securely packed. The hitch is well built and fits perfectly on my Ford F-250. Very pleased

Perfect drop height to pull my trailers. Have a 2024 Ram Power Wagon and the increased suspension height requires a large drop hitch to pull trailers at a better angle

Pleased with the drop hitch and both the 2" and the 2 5/16" ball. Will be using the bigger ball to move my travel trailer in the drive way. I've ordered from etrailer in the past and always satisfied with the products, as well as the customer service.