# 1
Kuat Beta Bike Rack for 2 Bikes - 1-1/4" Hitches - Tilting
The quality of the bike rack was excellent, but I was unable to use it because I couldn't open and close my trunk (Honda Accord 2012) when the bike rack was closed. It may have worked if I had a different trailer hitch, but I didn't want to spend the extra money on a new trailer hitch. Unfortunately, I will need to return the bike rack.
I was looking for a light weight bike rack for my 2015 Honda Accord. Your videos stated that the Kuat Beta was light and easy to install. You were right. I opened the box, read the instructions, and had it installed in about 10 minutes. I don't use a rack lock. It is so easy to pop on and off the hitch that I keep the rack in my car trunk.
# 2
Swagman Trailhead Bike Rack for 3 Bikes - 1-1/4" and 2" Hitches - Tilting
My previous bike rack was a hitch mounted Yakima. It was sturdy but not well suited for my low Subaru Impreza. It stuck out too far and hung too low so that I had to inch my way down the driveway or over speed bumps for fear of it bottoming out. A roof rack or a rear window mounted rack was not suitable since I wanted to be able to also carry two kayaks. First, I tried to modify my rack by shortening the part that sticks out of the hitch. I tried to saw off about 6 inches so it wouldn't stick out so far but the steel was much too hard. I ended up ruining several metal-cutting blades on my power saw before I gave up. I looked for other rack options. There weren't many out there. But eventually, I found something that met my needs. I purchased the "Swagman Trailhead 3 Bike Fold Down Bicycle Hitch Rack" in 2013 from eTrailer.com. The part that enters the hitch curves up to increase clearance from the ground. It is sturdy and sticks out far enough so I can still open my trunk hatch without having to lower the main vertical bar on the hitch (though I could if I wanted to). It isn't often I am really excited about a piece of gear but this hitch rack has made me worry-free when I transport my bicycle(s) via car. The only thing I don't like is that it is advertised as being a 3 bike carrier but it only fits 2 hybrid bikes. Maybe it will fit 3 skinny racing bikes but for the average rider, don't expect to fit on more than 2. But my experience is that is the case for all bicycle racks.
Nice heavy duty rack. Putting it together is quite simple if you read the instructions. I like the ability to use both a 2" or 1 1/4" receiver. etrailer is very easy to deal with.
# 3
Kuat Sherpa 2.0 Bike Rack for 2 Bikes - 1-1/4" Hitches - Wheel Mount - Black
All in all pretty good. The arms that grab the front wheel have loosened a little bit and move side to side. They have never failed, just feel a little wobbly. The hitch receptacle is also hard to tighten but might be due to the receptacle it self. Used rack on a long trip and the bikes moved slightly side to side, but nothing serious.
Great bike rack. Compact, great on trips, easy loading/unloading bikes. Easy removal when not using.
# 4
Saris Freedom Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
Seems like a good rack for the price, especially when compared to others with the same weight rating. It was very easy to assemble, just a few bolts and that's it. I put two 62lb e-bikes on it (Ride1Up Turris) and it has minimal wobble and movement as expected. The straps that come on the center cradles were too short to go around our bike's frame and battery so I had to purchase a separate set of long straps from Saris for an additional $20. So be aware if you have an e-bike with a fat frame where you plan to use the cradle on, you might have to spend another $20 on a pair of long straps. While I waited for the straps I just used a velcro-strap and it worked fine. So far I am content with this rack overall and hope it lasts many years.. I gave it 4 stars instead of 5 because I had to purchase additional straps to make it work.
I had to put my electric bikes into this rack, backwards, to make them fit. Not ideal, but it works.The receiving 'trays' that are intended to provide support for holding the bikes, by being placed under the bike tires, are forced to be moved to a location that is not directly under the bottom of the bike tires. While it works in this manner, it is not ideal.For the support that attaches to the diagonal bike frame, we had to remove it from the vertical rail of the rack. We reinstalled it, upside down, because that's the only way we could make it fit, or 'grab', the bike frame. Again, we made it work, but it's not ideal. We chose to keep the rack because it was so much less expensive than the Thule rack we considered buying. The bike shop owner didn't agree with us. He observed that we are putting $3000 worth of bikes on the rack and risking that investment. So far, no problems, other than the ill-fitting installation.
# 5
SeaSucker Talon Bike Rack for 1 Bike - Fork Mount - Vacuum Cup Mounted
The rack arrived very quickly. Upon opening the box I observed that the covers for the suction pads had come loose during shipping. Probably not an issue. The instructions for assembly and mounting were clear and easy to follow. I planned to secure the cups to the glass roof on my VW. So, I thought it would be best to clean the glass and roof with auto detailing spray. After doing that I attached the carrier and gave it a prett y good shake. I have attached three photographs that may add clarity. I'm very optimistic. This may be the best carrier I've had for my bicycle. Keep Eager.
I received delivery and setup. I seem to be able to connect my road bike wheel with quick release - but not my road disc bike with thru-axle. Do I need an accessory for thru axle bike?
Mount: Hollywood Racks Destination Bike Rack for 2 Bikes on a 2020 Chevrolet Camaro
Hi, John with etrailer. Today we're taking a look at the Hollywood Racks Destination 2 bike rack on our 2020 Chevrolet Camaro SS. Now this rack is a platform style rack. It is a two bike capacity. Now, right off the bat I'll tell you this is not a good candidate for E-bikes. The weight capacity is only 35 pounds per bike.
Mount: Yakima FrontLoader Wheel Mount Bike Carrier on a 2012 Chevrolet Camaro
Today on our 2012 Chevrolet Camaro we'll be test fitting the Yakima, Wheel Mount bike carrier, part number y02103. The the Yakima roundbar roof rack system assembled onto our vehicle, we'll begin our test fit by placing our front loader directly onto our crossbars. We'll go ahead and fit the front and rear clamps around each bar. Then here at the front, we'll tighten the T handle until our handle is tight around our front crossbar. Now, we'll move to the rear and drop our T bolt through the appropriate slot and tighten with a T nut on top. We'll want to make sure that we get that all the way tightened down. With our front and rear clamps secured, we can then open the wheel loop at the front of our carrier and undo the rear wheel strap.
How to Install: Yakima ForkLift Roof Mounted Bike Carrier on your 2012 Chevrolet Camaro
Today, on our 2012 Chevrolet Camaro, we'll be test-fitting the Yakima ForkLift Roof Mounted Bike Carrier, part number Y02098. With a Yakima Round Bar Roof Rack System installed on our vehicle, we'll begin our test-fit by placing the ForkLift directly onto our cross bars. Here at the front, we'll go ahead and feed our clamp around our front bar. We want to make sure that we drop the T-bolt through the slot, and then tighten withthe T-handle. We'll want to get that clamp tight around our bar. Then, we can slide up our slotted bracket around our T-handle and install our skewer.
Thule Helium Aero Hitch Bike Rack Review - 2012 Chevrolet Camaro
Today on our 2012 Chevrolet Camaro we'll be test fitting the Thule Helium Aero 2 bike carrier for 1-1/4" and 2" hitches, part number 2H9042. To begin our test fit we'll slide the shank of the carrier into the receiver tube of the hitch. Line up the pin hole and allow our attached pin to fall into place. We use the hand knob here at the rear of the shank to secure our bike rack to our vehicle and engage our anti-rattle device. Now we'll go over some clearance measurements. We have about 12 1/2" of ground clearance. We've added about 12" to the overall length of our camaro. As you can see, we have full access to the trunk of our car with our bike carrier in its upright position.If you need more room to get into your trunk you can tilt your carrier away from your vehicle by pulling the lever here at the base of the mast. Now we'll pull the level at the top of the mast to swing out our dual arms.
Installation Guide for the Kuat Beta Bike Rack for 2 Bikes on a 2012 Chevrolet Camaro
Today on our 2012 Chevrolet Camaro, well be test fitting the Kuat Beta Folding Two Bike Aluminum Rack for 1-1/4 hitches, part number B202-114. To begin our test fit, well slide the shank of the carrier into the receiver tube of the hitch. Line up the pin hole and install our pin and lock. At the rear of the shank, well tighten the hand knob to secure our bike rack to our vehicle and engage our anti-rattle device. Now well go over some clearance of measurements. We have about 11-1/2 inches of ground clearance.
Thule Apex 4 Hitch Bike Rack Review - 2012 Chevrolet Camaro
All right today on this 2012 Chevrolet Camaro we are going to do a test of part number TH9025 from Thule, this is Apex-4 bike carrier. A couple of quick notes about this bicycle rack that will work with 1-1/4 inch receiver hitches both class I and class II. However with a class I receiver hitch you are only limited to carrying two bikes. This will also work with a 2-inch receiver hitch which the included spacer. We'll go ahead and start our test fit by installing the bike rack into the hitch we'll make sure that the integrated hitch pin snaps into it then we'll go ahead and tighten it down with the anti-rattle device. All right with the bike rack installed we'll go ahead and give you some measurements that will give you an idea of clearing between the bicycle rack and the car and the ground.
Rhode Gear Highway Hitch Bike Rack Review - 2012 Chevrolet Camaro
All right, today on our 2012 Chevrolet Camaro we're going to do a test fit of part number RG8015220 from Rhode Gear. This is our Highway 2 bike carrier. A couple quick notes about this bike rack is that it will work with 1-1/4" receiver hitches both class I and class II. It will also work with class III receiver hitches with the included spacer. We'll go ahead and start off our test fit by installing the bike rack into the hitch then we'll install the anti-rattle bolt and put the safety pin on the other side. All right, with the bike rack installed we'll go ahead and give you some measurement that will give you an idea of clearance between the bike rack and the car and the ground.
SportRack EZ Hitch Bike Rack Review - 2012 Chevrolet Camaro
All right, today on 2012 Chevrolet Camaro we're going to do a test fit of part number A30901 from Sportrack. This is a Sportrack EZ 2 bike rack. Couple of quick notes about this bicycle rack that will work with 1-1/4" receiver hitches both class I and class II. It will also work with class three receiver hitches with provided spacer. Okay, we'll go ahead and start off our test fit by installing the bike rack into the hitch then tighten it down in anti-rattle bolt then installing the safety pin on the other side. Okay, with our bike rack installed we're going to go ahead and give you some measurements that give you an idea of clearance between the bicycle rack and the car and the ground clearance.
Thule Vertex 4 Hitch Bike Rack Review - 2012 Chevrolet Camaro
Alright today on this 2012 Chevrolet Camaro, were going to do a test fit for part number TH9029 from Thule. This is a Vertex 4 Bike Carrier. A Couple of quick notes about this bike rack is that this will work with 1-1/4-inch receiver hitches both class 1 and class 2. However, with a class 1 receiver hitch, youre only limited to carrying two bikes. This will also work in 2-inch receiver hitch with the included spacer. On this car, well be using a class 1 receiver hitch.
What our customers are saying:
"I purchased a hitch, wiring harness, bike carrier and bike adapter for a newly redesigned 2007 Hyundai Santa Fe. Everything arrived in a matter of days and either fit or worked perfectly. Great prices, quality and service support. Rest assured, I'll be recommending you to anyone who asks. Thanks again."