Best Chevrolet C/K Series Pickup Truck Camper Tie Downs

I used these to mount a vintage 1970 Avion C-11 to a 1993 D250. They worked great and were much stronger than I expected - and it was a huge cost savings (and a much more attractive look) than some of the frame mounted options of more than $1000. There were some oddities that I noticed. It was impossible to mount them exactly the way the instructions suggested because of where on the wings near the cab,. The brackets also could not stay on with the camper unloaded because they would hit the jack mounts, meaning they had to me bolted in after the camper was in the truck but before lowering the jacks, making the access to the bolts a frustrating 'feel for it' experience.I'f suggest the manufacturer secure the bolt so that you don't need to hold both sides when tightening/loosening, and also refine it to need less turns to do so. It took me 2 hours to mount the first time, and not much less when removing them with the limited access. The pads also came off in the first use. I gave it a 5 star because I realize there are limited options for older campers and anything universal is going to have issues with some thing - so that's just my input and experience. Overall pretty reasonable for the price and functionality.

Order arrived quickly, priced ok. Box was broken open by shipper NS the 4 T-bolsts bolts ere missing. Etrailer shipped ou the missing parts a few days later, but in the meantime I fashioned t-bolts I could use for my trip. Many customer comments on this camper Brophy tie-down match my experience. Etrailer follow up was great, but surely must be aware that their packing is sub-standard. Perhaps zip-tying the T-bolts to larger pieces would eliminate the loss even in case of breakage. Functionally the tie-dows were easy to install and seem quite adequate for off-road use of my in-bed camper. Will continue to use etrailer because of their excellent customer service.

Put these on my 2002 F350. I have used torklift in the past and could never seem to get the camper (very light, 1100#) from moving around in the bed. I think that was due to the length of the chains and the angles they were at. With the Brophy's everything is good and tight. It can flex a little and sometimes does off road, but it is rock solid like a part of the truck 99% of the time. I have had none of the horror stories about it deforming the bed sides or anything like that. I would buy them again.

These appear to be well-made. I had a hard time drilling the holes, as the tubes that go in the stake pockets are rounded on the side that faces into the bed. The resulting slipped hole broke a couple of the sheet metal screws provided, luckily I had plenty of spares in my misc. hardware bins. The diagram shows both screws per bracket on the inside of the stake pocket. For my 1970 F250, I found it sturdier to do one on the inside, one on the side of each pocket, offset in height a little. Most of the problems I had were my own fault, though, trying to do this by lamplight as it got darker outside. I will point out for future users and to the team that writes the instructions: The instructions are very clear with a good diagram. Many of the other reviews say these twisted or bent on dirt roads, or bigger campers bent them, or they didn't fit the vehicle. There are very clear, concise guidelines about what not to use them on, including "Not for off-road use" The only problem with the instructions was this: For the hex bolts that go from the top through the bed rail, it says to use an 11/32 bit. The bolts provided are only 5/16. 11/32 is bigger than the hole in the brackets for these bolts. A 5/16 bit worked just fine, and was more readily available at my local hardware store. I will add pictures when we go to pick up our camper. For now, these seem more than adequate for the size, weight, and style of truck and camper we use.

Easy to put on they work perfectly very solid I have a 20-22 palomino SS 1251 truck camper Badland Edition doing a great job thank you a bunch

Overall, great design and build. The only change would be the T-bar being larger overall (L&W). It can be tricky to find a good spot in the truck bed wall to place the T-Bar. We had to craft some 2x4's to provide a flat surface (2002 F-150). The exterior attachment points do extend significantly outside of the bed of the truck. The dimensions image does not show this full dimension (Inner bed edge to outside attachment point. On our F-150 and Northstar TC800, there was not enough room to back the truck by the camper legs with these mounts installed. And, we cannot install them once the camper is on the truck.

Product and service as advertised. Recommend for others.

After one week on truck, in Southern California, components are discolored and rusting. What’s up?

The only think I didn't like is that the 3/8" frame bolts (connecting to the frames that the truck bed sits on) use lock washers instead of nylon lock nuts (nylocks). I feel these could come loose over time so I used nylocks instead. Otherwise it was a great installation. Installed on a 2007 F250.

The product works perfectly!!

Easy to install. Very strong and love the idea the mounts are hidden when not in use. Had bedrail tie downs before then upgraded to forklift. Etrailer was there with excellent customer care/support. Above and beyond. Will definitely use etrailer for any future needs.

Got a 2003 Chevy 3/4 ton with a Palomino slide in and the Torklift products hold it all together. GREAT PRODUCTS

The hardest part of the installation was removing the frame bolts from the truck that are reused. The instructions were clear and easy to follow, and each piece fit perfectly where it was supposed to go. You don't need to be a mechanic to get these installed, but the proper tools are a must, along with a good chunk of an afternoon.

Kate was very helpful and professional Waiting for notification of my return

I am very pleased with the performance,and ease of installation of this product.My only complaint is the rubber padded guards do not last very long

They do exactly what they’re made to do.

Good product ….. Holds in place perfectly…..would recommend

Very well constructed and heavy duty. Liked the idea of no drilling during install. Excellent fit and provided stability safety for upcoming family camping trips with our truck & camper. Would recommend these tie downs for anyone who owned a truck camper set up!

Easy to install. Good quality construction. Great customer care when I ordered the incorrect version - was well handled.

fit pretty good and the device for getting the bolts in tough places was brilliant

I never got any of the parts but this stabilizer bar. Where is $[XX] worth of parts. I ordered this stuff 3 weeks ago.

I am extremely happy with this setup. Installation *could* be done by a single person, but would involve A LOT of figuring out special approaches to holding things in place for alignment and tightening. But I had a friend help me and installation went about as perfectly as one would hope for. I have used the oriduct for multiple trips, sone of which were on washboard gravel and dirt roads, and the setup has worked perfectly. My truck camper is a popup and pretty light, and the setup holds the camper in the truck very nicely. I suspect it would work very well even for heavier and larger truck campers, as well. I called support before ordering and was provided with perfect information in a very professional and caring manner. I am 100% satisfied, and highly recommend both this product and etrailer as a company.

I put these on my F250 for when I carry my Northstar Camper and they have made an enormous difference, especially in sway. They work!

You should make the front angles a little longer for the top of the frame of the truck but thank you very much all done

I like to thank Lori with etrailer and guiding me through the process of getting , Front and rear, Torklift Camper Tie-downs -Custom Frame Mounts. Well doing research this was the best way to go for tying down and stabilizing a camper. Torklift camper tie-downs are solid well built! I had ordered Mounts on Monday and received them on Friday . I Had the tie-downs on my , 2019 Chevy Silverado 2500 by Saturday. The whole process was awesome , real easy installation. Great help with videos and instructions on mounting tie-downs on my truck provided by etrailer. I’m going to use them on my pop-up Hallmark Camper. Thank you for all your help etrailer.

I bought the TLC2220 for a low profile pop up cabover camper which I had for another Chevy 3/4 ton truck. The prior truck utilized a different attachment but was not available for my current 2012 Chevy truck. The TLC220 offers an excellent attachment point that is made out of thick well made steel and covered with a nice black powder coating. The instructions that came with the product should be thrown away. Pictures are poor, verbiage is incomplete and large gaps in the actual application. The saving grace is the video from etrailer. This is a great video. Complete, simple with no gaps and tells you exactly what the difficulties might be. This video even called out the socket sizes. Unfortunately the mate to this; the TLC 3212 rear mounts has a poor video with again gaps in application. And... again the TLC3212 written instructions is just fireplace starter material.

Delivery was fast. Works perfectly for our Lance slide-in camper.

Had to remove trailer hitch for drilling eight holes for easier installation.

High quality product. TorkLift customer support is excellent. They mistakenly sent me two left inserts for the tie-downs. A quick call to customer support and they sent the correct part right out. Photo shows camper and truck before installation of TorkLift tie_downs.

Strong unit far better than bed mounted jnits.

Easy to install. Camper was only off my truck 2 hours. Better handling and more secure than pocket stake system. Only downside is drilling holes in exterior truck body, not a problem for me and blends in pretty well.

They work great and looked good the first summer. I will need to take them off an wire wheel the rust off of them this summer. Minnesota winters.

Great product, straight forward install. etrailer install video was very helpful. Photo shows camper and truck before install.

Best product for overhead camper tie-downs period. Instructions could use a little more detail and/clearer picture, but installation was relatively easy and only took approx. 2hrs to install. Much more secure than bed/bumper or stake pocket type tie downs.

The bolts were fine thread and the plates were threaded course. I had to purchase the correct bolts.the quality of the product was great though.

2024 Ram 3500 with running boards. Running boards had to be removed to do the job. Instructions need to state this, and did not. I really fought it until I realized that necessity. Rubber strip between bed and cab needs to be cut for tie down flange to make a nice install. It is too stiff to bend as the instructions instruct. Most hardware fine but the self tapping screws into the guide plates are cheap and strip out and break off easily. I had other stronger ones in my stash of extra hardware to use and had to.