While we have some salt spreaders like the SaltDogg Electric Salt Spreader # 337SHPE1000 that are capable of spreading a salt sand mix, none are capable of only spreading pea gravel or bulk sand.
Our smaller spreaders like the SaltDogg Electric Hitch-Mount Salt Spreader # 337TGSUVPROA are only capable of spreading #1 free-flowing rock salt. view full answer...
The SaltDogg Electric Hitch-Mount Salt Spreader for 2" Hitch - Gravity Feed w Auger # 337TGSUVPROA and the SaltDogg Electric Hitch-Mount Salt Spreader for 1-1/4" or 2" Hitch # 337TGSUV1B have a few differences. The # 337TGSUVPROA has a spread range of 3-30 feet while the # 337TGSUV1B has a spread range of 12-24 feet. Another difference is that the # 337TGSUVPROA has a 1/2 HP motor that is directly controlled by the controller. The # 337TGSUV1B, on the other hand, has a 1/8 HP... view full answer...
The SaltDogg Electric Hitch-Mount Salt Spreader part # 337TGSUV1B won't work with sand but we do have an option that will work with a salt/sand mix, the SaltDogg Electric Tailgate Salt Spreader part # 337TGS07 but it does however require a pickup. view full answer...
Yes, the SaltDogg Electric Hitch-Mount Salt Spreader for 1-1/4" or 2" Hitch # 337TGSUV1B does have a sealed motor. I confirmed this with my contact at Buyers Products. view full answer...
I have a solution for you but the SaltDogg Electric Hitch-Mount Salt Spreader item # 337TGSUV1B can only be used with dry-bagged #1 free-flowing rock salt or refined sodium chloride. I verified this information with the manufacturer. The weight of the sand compared to the weight of the salt is the limiting issue. If you use sand and have a failure your warranty will be voided.
The SaltDogg Electric Hitch-Mount Salt Spreader item # 337TGSUV1B can be mounted to both 1-1/4" and... view full answer...
The problem you're seeing with the SaltDogg Electric Tailgate Salt Spreader # 337TGS03 sounds like it's either with the controller or with the harness. Try testing the harness by applying power to make the motor spin. If the problem still exists then it's the harness, but if the problem is fixed then something is wrong with the controller.
To replace the controller we have the part # BP54FR you can use. view full answer...
The salt spreaders that we have are designed to either fit into the back of a truck or into a hitch receiver. If you're able to install a 2" receiver on your tractor, like the Gen-Y Weld-On 2" Receiver Tube # 325-GH-003, then you'll be able to use a salt spreader like the SaltDogg Electric Hitch-Mount Salt Spreader # 337TGSUV1B. view full answer...
The blinking J on the Controller for SaltDogg Salt Spreader # BP54FR indicates the spinner motor is jammed. You will need to turn the controller off and clear the jam. view full answer...
What our customers are saying:
"Very fast service. Shipped out an hour after I ordered it.Thanks!!"