Best 2014 Toyota Sienna Transmission Coolers

Good product easy install! had to order extra 5 feet hose to fit my 2012 Sienna. I bought it for towing my RV without damaging my transmission. Don't have any info if it really helps lowering my trans temperature but pretty confident about it.

Fast shipping, great product also good follow up by team member, I highly recommend this company that you can trust....

I installed this cooler on our 2006 Sienna to extend its life while towing our R-Pod 172 trailer. It appears to be doing its job, and after a year everything is still in it's place. Installation required a tiny bit of tinkering to route the hoses and zip ties, but it all went about as expected. The job was done in an afternoon (I am handy enough, but definitely not a car mechanic). I did wrap and tape some sheet metal around parts of the hoses to protect them from getting cut where they would otherwise be pushed against sharp edges. See photos.

Great quality easy installation. Make sure you know which hose goes from and goes to your radiator for proper installation, your dealer DOESNT KNOW and wont be of any assistance lol this will ONLY work on Sienna XLE or Limited with tow prep package. The upgraded radiator has the trans cooler lines.

Have a 1998 Lincoln Mark 8 w/ 4 speed automatic which retails for no less than $ 4000.00 - Having this potential monkey on my back , I decided to invest in a trans cooler. Fabricated mounts and bolted on , used double flare connection to cooling line w/ barbed fitting ; barbed fitting @ radiator fitting. Used 2 hose clamps @ cooler, one clamp on each barbed fitting . Could only mount with fittings to left ,fluid leaves radiator , enters cooler @ top ( to reduce pump load ), comes out of bottom & returns to tranny. No trans temp. guage, but cooler gets hot @ idle, verifying cooler works . Well constructed and sturdy,easy to mount ; comes with instructions.

I installed this cooler on a 2001 odyessey to help prevent a future trans failure.It was delivered quickly when promised,came with everything I needed for installation and had no problems.Overall a good product I would recommend this to anyone. I am also very happy with etrailer.coms service and selection and would definitly use them again.

Two cars, two transmissions radiators, very good product from etrailer.com Thank you !

Wanted to give my Honda better ability to handle a tow. this baby does the job. Transmission definitely cooler operation since the install. The install was simple and straight forward.

I purchased this for my C6 Corvette A6 transmission. I did, however, bypass the radiator and only use the transmission cooler for the C6. I purchased and used the Derale Radiator Adapter fitting 259-13035 for both the top and bottom and just capped them off to keep debris out of the reservoir. I also had to make some custom mounting brackets. This is an excellent product and it keeps the tranny in a great temperature range.

I have been happy with the Derale transmission cooler. Installation was simple enough and one year later it is still working fine

i recived my Derale Series 9000 Plate-Fin Transmission Cooler Kit w/ NPT Inlets - Class I -Extra Efficient - D13611 and i really like it its well built and it look to be heavy duty and am looking forward to installing it.thanks again for a great item.

Very helpful,

Package was delivered on time. Installed it the next day. Didn't realise it's for oil and transmition. Just needed the oil cooler. Either way it's installed. Took a bit as I mounted in a different location than in front of radiator. Only did the oil. Already have a trany cooler. However I might loop into the other side for a trany and use the whole radiator. So far so good

Well constructed. Could use more hose for the install. I had to buy another length to install it. In the photo you can see I fabricated brackets for it so it would be able to get better airflow. Not noticing a real big difference in cooling but I’m anxious to see how it goes when I tow my 29 ft. TT with my 17 Suburban with a 5.3 ltr. I’ve been towing without one with no issues but any help in extending the life of the tranny is worth it.

Keeps my Tundra’s transmission tamed, especially while towing.

Removing the front bumper/grill on my Odyssey was a must! Installation was pretty much straight forward once you confirm the feed, and return connection points. Mounting the actual cooler to the front radiator was the easiest part of the job. My Odyssey made two 650 mile trips pulling 2050 lbs with no problems so I’m very happy with the cooler!

good product form a great company ! my only complaint is this was listed as for my specific truck, but the "insta-dapt" supplied doesn't fit the Dodge truck of my year. even doing my research ahead of time, it seems to be hit or miss whether it would fit as some of them come with 5/16 fittings and some (like mine) come with 9/16 fittings. it doesnt matter the engine size, even other 3.7L dodge trucks of the same year have 5/16 fittings... I think Dodge made a change middle year, but never let the consumer know as mine is a late year '04. no dig deal as I was able to assemble it anyways and got it up and running great and both the radiator and trans are running much cooler now ! I attached the D12902 to the bumper as you will see in attached images. 2 attached images are just before finishing, bumper hasnt been attached yet, one of them is after everything was complete.

Good point. I hadn't tohhugt about it quite that way. :)

The fan is nice, the brass compression barbed fittings did not work. They leaked from both threads. I paid for fancy with a quickness 2 day shipping, took 5 days. I’m just glad I wasn’t too much in a hurry to cool my dads transmission for his road trip.

Everything was included to install the cooler and instruction sheet is useful. Hardest issue is where to mount. No leaks so far. Should help trans temps while towing.

My vehicle originally did not have a transmission cooler. After warming up, my transmission temperature would typically be 100 degrees higher than the ambient air temperature, whether moving or stopped. Towing the largest enclosed U-Haul trailer (6'x12') would raise the temperature to about 120 degrees above ambient. After adding this cooler, the transmission stays about 70 degrees higher than the ambient air temperature on the highway, and 80-85 degrees above ambient while parked or driving in slow traffic. I haven't towed that same U-Haul trailer since adding the cooler, but towing a much larger (8.5'x20') enclosed trailer raises the temperature to about 110 degrees above ambient. If you can find a spot the cooler will physically fit, it should work for your vehicle. You may have to get creative to solidly mount it. I used an angle grinder to remove part of a factory brace. When doing work in this area of your vehicle, be careful not to puncture the AC condenser! If you do, like I did, you will have to replace it. Some AutoZone locations will rent a vacuum pump and manifold gauge set. Doing your own repair means the total repair cost is only the sum of the new AC condenser and refrigerant. The inlet/outlet NPT fittings on this cooler need to be tighter than you think. I was worried about stripping the threads, and didn't tighten them enough at first. I ended up removing my bumper cover multiple times to tighten them until they stopped leaking. I found the best way to detect a leak was to zip-tie a folded paper towel below the fitting. If it turned red, there was a leak. For my application, I would have preferred built-in 3/8" hose barb inlets instead of the 1/2" NPT fittings.

Great quality! Simple installation, awesome product.