# 1
Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof
Very happy with etrailer.com and the amount of information I found before I made my selection. I went with the Rhino Rack for my 2016 Corolla. I watched the videos, read the instructions and within just a couple hours, my rack was attached, my canoe was loaded and I was out taking a test drive. 2 issues with the instructions. I didn't realize that there were two different size hooks...I did not see it mentioned in either the video or the written instructions. I got it right, but it was purely by chance. The other issue was the rubber pads which were, again, not mentioned. I installed them wrong the first time, but it didn't take me long to see my mistake. Happy with the stability and looks of the rack, and the help I received from Robert during the ordering process.
I liked how fast my item was shipped and received. Also that they kept me informed throughout. The only blooper that I had was that the installation sheet for my car had listed the front bar as the rear bar and the rear bar as the front bar. So it took me a while to figure that out. Once I figured that out they fitted like a charm, look good and are as sturdy as I expected. The 161mm measurement is installed on the rear location of my 19 corolla and the 157 mm measurement goes in the front.
# 2
Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4
Looking for a roof rack for my Toyota Corolla IM 2017 and chose the Rhino rack-Vortex Aero bars combination. It is strong rack, good quality and nice finish (I picked the black color). Installation requires patience but not difficult, instructions could be more detailed. Happy with the solution it gave me, finding a good rack to transport my Mountain bike to the trail. Highly recommended!
This is a quality product. From the web site to the rack parts to the assembly instructions, it was easy to assemble and the quality was impressive. I own 3 Thule racks, 2 Yakima and now this set of Rhino racks with Aero bars and I couldn't be more pleased. When my Mom gifted me her 2003 Toyota Corolla with only 42,000 miles on it, I decided to make it my daily driver. My Friday includes dawn patrol surfing, so I needed a way to carry surfboards and I wasn't sure I could get roof racks that worked. Joelo
# 3
SportRack Semi-Custom Roof Rack for Naked Roofs - Square Crossbars - Steel - 45-1/2" Long
The customer service has been great. Excellent communication about when the product shipped and accurate and easy to see package tracking as well. The roof rack is working out good. I have already taken out my kayaks and they are very solid. Although the pads that are to protect the paint could be a little better, on a late model 'beater' like mine it's not a big deal. Plus it is far less expensive than the big name brands. Overall great services and a great product.
Good fit for my old Toyota Corolla with naked roof. Instructions includes specific installation details for each model of vehicle this rack fits. Install was smooth and easy… even included an Allen wrench. The only tools I needed were a tape measure and a marker.
# 4
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" Long - Qty 2
I liked how fast my item was shipped and received. Also that they kept me informed throughout. The only blooper that I had was that the installation sheet for my car had listed the front bar as the rear bar and the rear bar as the front bar. So it took me a while to figure that out. Once I figured that out they fitted like a charm, look good and are as sturdy as I expected. The 161mm measurement is installed on the rear location of my 19 corolla and the 157 mm measurement goes in the front.
# 5
Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof
I am stuck on part 7 of the setup. The instructions do not clearly state the measurement for cutting the bar strip pieces. It says to refer to the DK Specification sheet, but there's nothing clearly labeled as such within my package. Can you please tell me the exact measurements in cm needed to cut the bar strip pieces for the rhino rack 2500 series euro style roof rack on a 2009 toyota corolla.Thank you for the help.
The rack was of good quality, solid and anchored well to the car. Putting it on was moderately difficult. The instructions were generalized for different types of cars and that is where the difficulty arose. There were certain quirks about my Corolla that required me to stop and think for several minutes about how something was supposed to be done. As they say, a picture is worth a thousand words. The pictures supplied were helpful but not complete. The thing that I really abhorred about the rack were the security screws. They were like a hex bolt with a strip of metal running down the middle (you will know what I mean if you buy the rack). One of the screws was not quite right and I stripped it trying to tighten it. Not sure why they made it that way but that is the one thing I would change about the kit, ditch that security screw. Overall I would recommend the rack and would buy another if the need arose.
# 6
Rapid Traverse Feet for Thule Crossbars - Naked Roof - Qty 4
The whole experience was freakin awesome. * Ordered on-line, delivered when promised, all packages were in excellent condition, and all parts were accounted for - no shortages, THANK YOU! * The Thule roof rack design, quality of materials, comprehensive instructions were really impressive. Everything went together without a hitch and really looks good installed. * We plan on carrying our 12 1/2' SUP's on the roof rack when we head out to the lakes. * It saves us time as our SUP's are inflatable, however it takes a bit of time to pump them up once we get there. Now it's just loosen them up and we're ready to go. Great job etrailer, I would definitely buy more products from your organization!!
Etrailer helped me out of a jam as I could not find the Thule parts I needed. They not only had the parts but got them to me in a few days! Made my trip to Lake Placid possible! Fantastic communication and customer service.
# 7
Yakima RoundBar Crossbars - Steel - Black - 48" Long - Qty 2
Good product, on the highway I noticed I had rattling noise and pulled over and I figured out it was the round bars so I ordered the wind deflector as well, other then that easy to assemble and very happy with this procuct
Good product, on the highway I noticed I had rattling noise and pulled over and I figured out it was the round bars so I ordered the wind deflector as well, other then that easy to assemble and very happy with this procuct
# 8
Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4
I have been very happy with the roof rack system.
The Inno foot pack was a good fit for my vehicle and accepted my old Thule square bars.
# 9
Rhino-Rack ROC25 Roof Rack for Naked Roofs - Vortex Aero Crossbars - Aluminum - Black
Sturdy roof rack. Installation was not too complex, a little tough to get the alignment just right on my Corolla. I combined this with some Malone J-racks. The bracket clamps tend to allow a drop or two of water to sneak in through the rubber seal at the top of the door. Not a huge issue. The bars make a fair amount of noise at speeds over 50 MPH. These are on my beater car so I don't actually take it on the highway much, but when I do, I tend to notice whistling.
Absolutely love it and it looks great on the ride
# 10
Inno Square Crossbars - Steel - Black - 50" Long - Qty 2
Ordered a full (naked) roof rack package with snowboard/ski attachment. Items arrived as described. Set-up was simple and flawless. Instructions are fairly clear & simple. A paper tape measure is included. No issues with fitment.Purchased the fairing to reduce wind noise and it works perfect! No excessive wind noise whatsoever -- can open sunroof comfortably if I wanted to. Have not yet put my snowboards inthe attachment yet, but do not foresee any issues. Roof rack is on a 2015 Infiniti Q40 (G37 sedan 2009-2015).
Incredible engineering: does not feel like an aftermarket rack. Easy to take off if necessary. Solid; highly recommend.
# 11
Yakima RoundBar Crossbars - Steel - Black - 58" Long - Qty 2
Free delivery that showed up in 3 days!!! Can't beat it. The crossbars with the Control Towers and LandingPad 9 fit perfectly on my Honda Element. Had them installed in about 30 mins. Don't have my cargo box yet and wanted to test strength, so I had my 110lb wife standing on them with no issues (yes, the car was parked). Plan to take a long camping trip next week with a cargo box on top...wife will be in the vehicle:-)
works good
# 12
Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet
I'm loving the roof rack , and Ashley from customer service was really helpful. Thanks e trailer. The reviews didn't lie.
Has worked great for transporting my fishing Kayak as well as small loads of lumber. It has worked fine for about a dozen and a half boards at a time or a couple of sheets of plywood. Just make sure that you have a good way to strap them down as well as maybe a rubber mat to help hold everything in place. The noise from it on the high way can be a lot but certainly not as bad as some that I have heard. I figure that anything on the outside of a vehicle like that will produce some noise.
# 13
Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver - 65" Long - Qty 2
We have been very happy with our Rhino Rack system atop our 2018 Chevy Express Van. We carry 2 Kayaks ( sit in style, 14 ft and 12 ft) upside down on the van roof and use some eye bolts and ladder supports with ratchet straps to hold them in place. It took a while to get them( due to being out of stock) but eTrailer has excellent customer service and kept in touch with us on the order status until they arrived.
Crossbars are true and straight. Work perfect for my application. Reliable product. Mounted solar panels to them.
# 14
Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet
The roof rack that these are a part of is of excellent quality a year after being installed. The roof rack had excellent installation instructions which matters with these types of items...
# 15
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2
Perfect fit! Who’s recommend and repurchase if I need for another vehicle
I have not bought car roof racks for decades--back when there were those very useful rain gutters. So I was shocked with the high prices. But what you get today is much more carefully engineered with a complicated construction. This Yakima version even comes with a manual 3.5 mm hex driver which turns out to be a torque wrench too. You use it 16 times, torquing to its limit, in installing the two cross rails on the four towers. Years ago you installed the towers where you wanted them on the rain gutters and adjusted the cross rails by sight. No more. You must go on line to Yakima. You must get the precisely engineered dimensions for your exact vehicle. You even adjust the towers for the roof slope and any toe-in of the roof line. Pay attention to the precise instructions. The result is very solid. I wish that I had more space between the cross rails. There is room for another 6 or 8 inches given where the door openings on my 2019 Toyota Highlander are spaced. But then the rear base clips would be different and that logistics would add yet more to the price. I am confident that I can secure a 4 X 8 sheet of plywood on the cross rails. And I will find my vehicle in the mall parking lot easier with those good looking rails. While I am happy with the end product, I wish the vendors had given more explanation of the fixed dimensions of today's installations. That would have helped make my on-line shopping less frustrating. Part of the problem is that Yakima and Thule do not provide cross rails for my LE Highlander's existing tower bases. And I could not get 60 inch cross rails on any of the versions that fit my LE's bases.
# 16
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2
The installation was super easy, and despite a long time stuck in shipping the delivery itself was extremely fast, and the package arrived in spotless condition. The manuals were very easy to follow, and the end result is absolutely amazing. They provided a nice, flush finish and hold the racks down tight.
etrailer's selection process, delivery ann installation help both online and on the phone was excellent
Rhino Rack Roof Rack Review - 2007 Toyota Corolla
Today on this 2007 Toyota Corolla, we're going to be test fitting the Rhino-Rack vortex aero cross bar roof rack, part number RRVA118B-2. That will be the actual cross bars themselves. Part number RRRLKVA, that will be the feet. And part number DK004 and that'll be the clamps or fit kit that actually connects inside your vehicle. Now we have the front one installed, let's go ahead and show you how to install the rear one. Kind of have it partially assembled here, one side already done. When you get the kit, the fit kit itself comes with the rubber pads and the clamps.
What our customers are saying:
"WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!"