Best 2007 Dodge Ram Pickup 5th Wheel Tailgates

Assembly was easy, after I provided additional nuts/bolts to attach pivot rings. None were provided, nor was it listed as inventory. Why are these not provided? As noted in other reviews, packaging was minimal. Result, slightly bent interior panel (see pic), does not affect external view. Next step is to add side support cables with additional hardware needed.

This is a great tail gate. This is my third version of this gate. The two previous ones were on trucks that aren't compatible with my current truck. It's a great product. It has to be for me to buy three of them. Air flows through, helping fuel mileage, and still keeps stuff from rolling out of the truck bed. Great service from eTrailer and fast delivery.

Speedy free delivery! Tailgate installed quickly and easily! Looks great on my 2007 Ram pickup! Thank you!

I'm very happy with my tailgate . It was vey easy to install all you have to do is follow the instructions. it took me about 45 minutes start to finish. After a year it still looks new and works like a charm. My friends wanted to know were I bought it it told with e-trailers. I know for a fact 2 of my friends bought one also .

Received my order in 3-4 days. Package was in perfect shape. Easy installation, in about 45 minutes! Very good fit and shut good without any adjustments. Would recommend ! 2016 Dodge Ram 2500 fifth-wheel tailgate

Very satisfied with my purchase through etrailer.com. Ordering was easy and product was shipped the same day. I received the order in two days. Everything was well packaged and all components were there. Installation was easy with clear instructions. Most of all my truck looks great.

Great addition to the tailgate. It really brings out the look of your Stromberg Carlson 4000 Tailgate. I have never been one to stand on my tailgate. I always use a step ladder so this will last me a lifetime. Very happy with this purchase.

strongest part of the tailgate ! Metal was perfectly aligned and went together seamlessly once holes were drilled.

Time will tell, but the gasket and its adhesive seems to be of good quality. Due to the shape of the the 2021 Ram tailgate area, I was not able to seal any of the 4 corners... but hopefully got enough sealed to greatly reduce dust/water intrusion. Again, time will tell. I had about 18 inches left when done, so don't make any "big" mistakes.

After removing an old seal which hadn't fully filled the gap around the tailgate, I installed the new Trailseal Gasket on my 2017 F150 in 15 minutes or so. The only potential problem area is at the lower corner of the tailgate where the metal is curved near the hinge. I added small piece of gasket directly on the tailgate to better seal the gap. I had also done this with the old gasket and it seems to stay in place OK. I live in Western Colorado which has plenty of dirt or gravel roads. The day after installing the new Trailseal gasket I was on one of those gravel roads and it appears that very little if any dust got sucked into the bed. The truck also has a tonneau cover, so if the seal is good, the interior stays reasonably dust free. This proved to be an excellent product and did what it was advertised to do.

Tailgate word perfectly for my needs, I live in northwestern New Mexico and use it spring to fall for 5 th wheel convenience during hookup and dropping trailer. The light weight and v shape eliminates much of the fear of baking normal tailgate into trailer. I don’t have to drop tailgate to hook up. Was difficult to sand rubber inserts to fit on initial install but I got it done, also doesn’t provide theft deterrent from bed as the v opens enough for hand to reach latch on by backflip tonneau cover however I knew that would be the case before I purchased. I am totally satisfied with my tailgate.

Excellent item. Fits perfectly. Just like our old one. Thank you!

Seal installed easily With exception of sidewall seal on my 2019 Ford Ranger Lariat. Big gap between sidewall and tailgate, Resorted to putting seal next to the taillight assembly as shown in pictures, no gaps between tailgate and seal.

worked great for about 10 opening and closings of the tail gate, then the large "bottom" piece started coming off. now a year later, the bottom piece is off and I have a dusty truck bed. yay gravel road life....

The cutout for the gooseneck needs to be lower. We really have to crank up our trailer to clear the tail gate.

Perfect fit. Good quality. Zero issues.

I had to cut out my sewer hose bumper. The receiver hitch would not lower enough to clear it.

Thank you Amy for getting me to the right tailgate. Love the design!

This tailgate is very high quality, better than I hoped for. Installation was easy and no parts missing. Looks great on my truck!

Hello etrailer staff! My tailgate arrived in a timely fashion but the journey was hard on the box and packing inside the box. UPS beat up on the box to the point of some of the contents are still in a truck or warehouse. I called etrailer and spoke with Noah. He assured me that he would get the missing parts in the mail and I would have all I needed to mount my tailgate. Noah was good to his word. Parts arrived today and the tailgate is mounted. The tailgate should be fine. Thank you Noah and all etrailer Staff. You did a fine job for me and my old 2001 Duramax Chevy.

This was a gift for my husband. The measurements weren't looking correct for the tailgate. Called customer support and Kelly was most helpful about which one to order. It was a perfect fit and easy to install. Shipping was quick.

One year ago I purchased this model tailgate for my 2003 Silverado. I found immediately that delivery of it as without exception the fastest. This tailgate made the act of hooking and unhooking from my 5th wheel trailer was simplified tremendously. The visual of the Pin lining up with the hitch was very clear. The Tailgate did require some minor assembly by me however minimal tools were all that was needed for the assembly. This took a mere 30 minutes for me to perform and the tailgate fit perfectly. It still looks great to this day and performs excellently. I recommend this product without reservation.

One of the drawbacks is finding out that you can't retain the camera from your Ford tailgate. (I suspect this will work on other non-Ford tailgates also.) I simply removed the camera and wiring harness from the original tailgate, stuffed the cable back through the frame's exit hole and then trimmed the left side of the grommet as depicted in the photo to make room for the 90 degree electrical connection to the camera (left side). The camera is then a press fit into the plastic grommet and doesn't require any other mounting screws or glue. As you can see from the photo, the field of view is excellent. This is a free and easy fix for customers who might want to retain their camera without an expensive accessory kit.

This tailgate looks great and works great. The instructions are easy to follow for the installation. It took me about 20 minutes to complete the installation process. I recommend the Carlson Stromberg 4000 series tailgate.

I was told this tailgate cannot be painted,well yes it can be just use a flex agent in base and clear.

Quite straight forward to install. Good bang for the buck if you don't need much weight loaded on the tailgate. Used with the Husky Backup Camera Relocation Kit on my 2013 F-150. Simple mod to the camera kit (cut off lower wire cover and use longer screws to attach to gate where you want it.) Camera is wide angle enough that placement isn't that critical.

Tail gate is ok the Curt plate and A20 fifth wheel hitch are amazing! Lori in customer service is awesome!!!!

I really like the product, seems well build and easy to install, the directions that came with are of not much value but some common sense and the tailgate is fairly simple to install with very little adjustments needed.

We are extremely pleased with the purchase of our 5th Wheel tailgate. Took only 20 minutes from the box to completely installed, including removal of solid tailgate. We will be recommending etrailer to family and friends.

This tailgate was here in three days it's lightweight looks good and very easy to assemble had it on the truck 10 minutes after opening box fits great. Thanks e trailer

After reading instructions twice we installed lower seat for tailgate to 19 1/2 in. mark. Then installed right upright seal(see pic). After checking fit we installed left seal putting it on radius. Much better fitting seal. Had to put seal(excess from upright) on tailgate near latch(zee pic) to try to fill gaps at top of tailgate. Installed on 2018 Chevy silverado. Hope pic go through.

Very disappointed, at first it worked great then the lower seal fell off and hanging within 8 months. I installed this per instructions on a brand new from the dealer truck with a tonue cover.

I didn't put it on yet. Because I dont want to lose my back up camera

Hello, I purchased the 2015 Ford F-150 Stromberg Carlson 100 Series 5th Wheel Tailgate and followed the directions. Everything worked correctly until I reached Step 11 - Reattach your factory tailgate cables to your new 100 Series tailgate.. The nuts are built into the tailgate. You need to either include (2) 1/2-inch nuts or state in the documentation the customer must purchase (2) 1/2-inch nuts to complete Step 11. I attached a picture showing the Ford tailgate and cable and the finished install. The install went faster than expected less than 30 minutes and looks great on my truck.

Very quick shipping!!!

Cane off within first week of use. Would t recommend buying this.

Tailgate is absolutely awesome. Works perfectly and looks great.

The tailgate I ordered was very easy to put together and made very durable.i Will definitely use this company again.

I was wanting a 5th wheel tailgate for my Tundra since I pull a 5th wheel camper and I’m glad I chose the stromberg tailgate, it was easy to install and looks awesome and now I don’t have to worry about ruining my tailgate. I recommend this tailgate to everyone. Thank you etrailer for the great transaction and very fast shipping!

It was easy to put on, but there is about a 4 inch gap between the bottom of the tailgate and the top of the bumper that looks pretty chinsey. Might have to spray paint it to look better.