Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Zinc-plated steel backing plate reinforces a Brophy recessed D-ring tie-down anchor (RR05). Plate bolts on underneath the floor of your trailer to reinforce the area under the anchor for maximum support. Mounting hardware not included.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Brophy Backing Plate designed for use with the recessed 5,000 pound D-Ring tie down. This part number is BP05. As you can see the four bolts that come through our tie-down are going to run right through our backing plate, allowing us to put on a lock washer and a nut and really spreading out that holding force over a greater area. As you can imagine if we just had the four bolts coming through here we'd be limited in the amount of space that was actually holding our tie-down down. Once we have this incorporated it's going to spread that our, dissipate that energy and give us a good, strong tie-down connection point. This works great in an enclosed trailer which we are using today. Also just about anywhere else that you've got the room to put that backing plate behind your D-ring where you need a hold down connection point. Here's that part number RR05.
That's that Brophy 5,000 pound recessed D-Ring. Here you can see the four bolts that are coming through this right down into our backing plate. Now that we've seen what it does and how it's going to work, that's going to complete today's look at the Brophy Recessed D-Ring Backing Plate, right here, part number on that is BP05. .
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Joseph
6/14/2021
After a year of use, there has been no problems with the BP05. Not much hauling for car shows in the past year, but I did head to the Rocky Mountains to pick up another antique car, a 5,000 lb. land yacht. An emergency stop on the interstate highway while descending the mountains put the load anchors and BP05s to the test. All is well.
Mark
4/5/2019
Great
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
3/10/2025
So glad to hear that, Steve! What types of cars do you haul? Do you enter in car shows?