7-Way Wiring Diagram Availability

Question

Question:

Need diagram for wiring 7 pin Tralee connector 06 dodge ram Curt 7 pin connector wiring diagram for a 2006 dodge ram 2500 diesel

asked by: Rick

0

Expert Reply:

Check out the picture I attached plus the FAQ article to the right to see a 7-way diagram you could use to wire up your trailer.

expert reply by: Jameson C

0

click to enlarge

Lance N.

1/19/2020

My trailer lights 7 way are malfunctioning. Presently, I know I have no running lights on the trailer. I believe I have had no trailer lights at all. Suggestions? Ive checked all the fuses I can find, and I left my wiring literature plus the fuse diagram 150 miles away. Any help will be appreciated- even just the number of each fuse involved would help as I can find the diagram online.

Reply

Jacob H.

1/20/2020

What I would recommend doing is to unplug the trailer from the vehicle so that you can test the connectors on the vehicle so that you will know if its coming from the vehicle or not. You can use a light tester (which we have available # PTW2992) to test each of the connections on the vehicle and the trailer to see where your problem is. I have linked a help guide so that you can navigate the 7 pole plug a little easier.

Helpful Links

faq-wiring.aspx

Wiring/Draw~Tite/40376.html

Reply

Answer 1

The wiring kit I recommend installing on your 2024 Ram 2500 is the Pollak 5th Wheel / Gooseneck T-Connector #PK11893-11932 which tees in behind the 7-Way at your bumper and installs in your truck bed. I really like the Pollak kit because of how…

view full answer...

Answer 2

You are correct, the Roadmaster Falcon All Terrain tow bar repair kit is the part #RM910003-85.

view full answer...

Answer 3

Although I don't know the exact colors that you need to attach to specific functions on your 7-Way, you can take a circuit tester like part #PTW2993 to figure out which wire carries which function and then connect them using the attached photo.…

view full answer...

Answer 4

There are quite a few differences. The ones you can see easily on the outside are the display and control buttons. The P3, part #90195, uses a multi-color LCD to provide more information where as the Primis IQ uses basic LED numbers like what you…

view full answer...

Answer 5

For your butt hinge, I recommend using the Paneloc 5 Knuckle Butt Hinge - 2-1/2" Long x 2-1/2" Wide - Stainless Steel #H674-200U. The pin diameter is 3/16 inch. You may want to use more than 5 depending on the weight you will be placing on…

view full answer...

Answer 6

I spoke with my contact at Tekonsha, who is doubtful the controller is the issue. The voltage from the controlleer that's sent to the actuator is very minimal, it's just telling the actuator when and how hard to fire. The actuator is actually…

view full answer...

Answer 7

Typically the black wire on a trailer 7-Way like the Hopkins #HM20048 is for 12V power. It will run from the positive battery terminal on your tow vehicle back to your trailer battery or whatever you're needing to power (like interior lights).…

view full answer...

Answer 8

The in-bed trailer wiring connector your 2008 Dodge Ram 2500 would have would be a 7-way like the part #PK11893 that you referenced. I attached a picture that has a standard 7-way wiring diagram for you to check out.

view full answer...

Answer 9

For your horse trailer with Dexter Torflex 3500 lb axles, you will need the Torflex Lift Kit - Tandem Axle - 2-5/8" Lift #K71-707-02 along with two sets of the Dexter Axle Torflex #10 Axle Side-Mount Frame Installation Hardware Kit #DX54FR which…

view full answer...

Answer 10

I attached a picture with circuit functions labelled on the 7-way picture you submitted. I also attached a picture of a 7-way diagram as well.

view full answer...

Answer 11

It sounds as though there is a short or something is mis-wired. Using a circuit tester, like the #PTW2993, check the connection points in the vehicle side connector, to see if there is constant power on the running light circuit (brown wire on the…

view full answer...

Answer 12

When a trailer's tail light remains on when the vehicle is shut off, this usually indicates some kind of short in the wiring. I first recommend using a circuit tester like #PTW2993 to check the vehicle side connector. You will want to see if…

view full answer...

7-Way Wiring Diagram Availability

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching