What PSI Is Needed For Load Range E Tires On Trailer Carrying Pontoon Boat
Question:
I am getting ready to take my pontoon boat to Canada 810mi what I have not been able to determine is ... what should the tire pressure be for a trip like this. this is a single axle trailer 1500 lbs pontoon boat 1450 lbs tires 20.5 X 8.0 - 10 ply load range E
asked by: Allen W
Helpful Expert Reply:
You will want to check your tire and it will have the maximum psi listed. I have attached a helpful article that lists what the tire size listings were, and what is used now.
For example, if you look at the chart on the attached article it has a tire with the same dimensions you mentioned you have. The next column lists the tire size that is used now. You can see that for the load range E tire we carry, the maximum psi for the 205/65-10 is 90 psi.
At the maximum air pressure, the tires will perform and wear best, and get the best gas mileage.
If a trailer tire is inflated to a lower air pressure than the maximum, the amount of weight that the tire can carry will be reduced. If a heavier load is put on the trailer tire than what is recommended for that air pressure, the sidewall of the tire could heat up and cause the tire to fail.
Product Page this Question was Asked From
Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 5 on 4-1/2 - Load Range E
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range E
- 205/65-10
- 10 Inch
- N - 87 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Galvanized
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 5 on 4-1/2 - Load Range E
- Shop: Kenda Loadstar 205/65-10 Bias Trailer Tire w/ 10" Solid Center Wheel - 5 on 5-1/2 - LR C
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 5 on 4-1/2 - Load Range D
- Q&A: Replacement Hubs for 1997 FLOE Pro 100 Plus Snowmobile Trailer
- Q&A: Recommended Tire and Wheel Combo to Replace a 20.5-8 x 10 Tire
- Search Results: 205 x 8 10 tire and rim
- Search Results: 205x8~10
- Search Results: spare tire carrier
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Spindle Nut 1"
- Shop: Washer For 1" Spindle
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: RV Bearing
- Search Results: trailer wheels
- Video: Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel Spec Review
- Video: Checking Out the Americana Metal, Bolt-In Valve Stem
- Video: The Low-Down on the Taylor Made USA Boat Flag
- Q&A: Is the 205/65-10 Bias Trailer Tire a good Replacement for the 20.5 X 8.0 X 10 Bias Ply Tire
- Q&A: How Many Revolutions will a 20.5x8x10 or 205/65-10 Trailer Tire Turn in One Mile
- Q&A: Are the Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel Available in a Set with a Spare
- Search Results: 20.5x8.0 10 load e
- Q&A: Expected Mileage Performance from Kenda 205/65-10 Trailer Tire # AM3H490
- Q&A: Recommended Tire for a 20-Foot Pontoon Boat Trailer Traveling Down the Highway
- Search Results: 13515
Chris R.
5/8/2024
Hi Jeffrey. If you don’t need the full load capacity of the tires, is there any harm in running them at 65psi rather than 80 so the tires will absorb some of the bumps or would you still suggest max pressure? I estimate the loaded trailer is about 3800 lb, so way under the limit of 2860lb per tire. Thanks!