Is a Transmission Cooler Recommended for a 2007 Toyota Sienna Towing a 1,500 lb Camper
Question:
2007 sienna awd limited, towing less than 2000 lbs across country...do I need transmission cooler? Thank you
asked by: King S
Expert Reply:
Adding a transmission cooler would be a good idea, especially if you will be towing during the summer. Overheating is one of the main causes of transmission failure and towing a trailer puts more stress on the engine and transmission.
Transmission fluid cannot be over cooled, so it is best to install the largest and most efficient cooler that will fit. A cooler that I would recommend for your 2007 Toyota Sienna is the Derale Series 9000 Plate-Fin Transmission Cooler, # D13612. This cooler is more efficient that the Series 8000 cooler, # D13501, that you referenced and will work great when towing a trailer less than 2,000 lbs.
This cooler comes with the Derale Insta-dapt radiator adapter that works with most vehicles with 5/16 inch transmission lines, but it does not fit all. I recommend measuring the diameter of the transmission lines on your Sienna to see if different fittings are necessary. If your transmission lines are 3/8 inch or 1/2 inch lines, then I recommend cutting the lines and using a compression fitting like part # D13032 for 3/8 inch lines or part # D13033 for 1/2 inch lines.

Products Referenced in This Question
Derale Transmission Line Compression Fitting Kit - 3/8" Line to 3/8" NPT Barb
- Accessories and Parts
- Transmission Coolers
- Fittings
- 3/8 Inch NPT Hose Barb
- Derale
more information >
Derale Transmission Line Compression Fitting Kit - 1/2" Line to 1/2" NPT Barb
- Accessories and Parts
- Transmission Coolers
- Fittings
- 1/2 Inch NPT Hose Barb
- Derale
more information >
Derale Series 9000 Plate-Fin Transmission Cooler Kit w/ NPT Inlets - Class II - Extra Efficient
- Transmission Coolers
- Plate-Fin Cooler
- Small SUV
- Standard Mount
- 11W x 6-3/8T x 1-1/4D Inch
- With 1/2 Inch NPT
- Derale
more information >
Product Page this Question was Asked From
Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class II - Efficient
- Transmission Coolers
- Plate-Fin Cooler
- Small SUV
- Standard Mount
- 11W x 5-3/4T x 7/8D Inch
- With 11/32 Inch Hose Barb Inlets
- Derale
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Frequently Asked Questions About Transmission Coolers
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Transmission Cooler
- Q&A: Differences Between Three Derale Series 8000 Plate-Fin Transmission Coolers
- Article: How to Measure for Trailer Hitch Drop
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Q&A: What You Need To Tow A Trailer With A 2017 Toyota Rav4
- Q&A: Trailer Hitch And 7-Way Wiring Harness For 2010 GMC Savana 2500 Passenger Van
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Comparing Flex-A-Lite And Derale Transmission Coolers For A 2016 Honda Pilot
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Article: How to Hitch and Lock a Trailer
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer