Comparing Curt And Draw-Tite Trailer Hitches For A 2022 Subaru Impreza

Question

Question:

I have a 2022 Subaru Impreza hatchback. Looking for a Class 1 or 2 hitch to primarily be used for a bike rack. I was wondering which of the following two hitches would be better: Draw- trailer hitch or the Curt trailer hitch? My primary concern is ground clearance in the back. Which one will sit closer to my car? They will both accept a 1.25 bike rack correct?

asked by: Jamie B

0

Expert Reply:

Hey Jamie,

I do typically prefer Curt's quality over Draw-Tite, however Curt only has a class I hitch # C11465 whereas Draw-Tite has a class II hitch # 36644 that's going to have an increased capacity for the same cost as the Curt hitch. This would have a 3,500lb gross towing capacity (GTW) and 350lb tongue weight (TW) capacity instead of just a 2,000lb GTW and 200lb TW capacity. You'll still need to check your Impreza's towing capacity to ensure you're not exceeding what it can handle though in the event that you do end up towing a trailer.

The # 36644 has a 1-1/4" receiver tube opening so it would accept your bike rack's shank. If you want to add lights to a bike rack or cargo carrier then you'll also want the T-One Vehicle Wiring Harness # 118744 as well.

expert reply by: Kevin C

0

Jamie

11/13/2024

I believe my towing capacity for my Subaru Impreza 5 door wagon is 1,260 pounds (570 kg). Would the Curt trailer hitch be the best?

Reply

Kevin C.

11/13/2024

@Jamie I would still stick with the Draw-Tite # 36644. Tongue weight is the downward force on the hitch, which would be weight from your bike rack. Having a bit more tongue weight capacity will be more beneficial in the long run. The safety chain loops on the # 36644 are also a lot more open and accessible than the Curt. With them both being so close in price too the Draw-Tite is the clear winner in my opinion.

Reply

Jamie

11/13/2024

@KevinC Thank you. I appreciate the recommendation.

Reply

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

The Curt Class I Trailer Hitch Receiver #C11465, the Draw-Tite Class I Sportframe Trailer Hitch Receiver #DT24959, and Draw-Tite Class II Trailer Hitch Receiver #36644 are all within roughly a 1/4inch of ground clearance when installed on your 2018…

view full answer...

Answer 3

I checked with Draw-Tite and can confirm for you that the Draw-Tite Trailer Hitch #36644 you asked about will fit your 2019 Subaru Crosstrek hybrid. I attached an install video for this for you to check out as well.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 10

Hey Tim, The ZCI Circuit Protected Vehicle Wiring Harness #119250KIT is compatible with LED lights and has been used as a go to for years for people who have LED trailer lights. The light function is supposed send a tiny bit of voltage from the…

view full answer...

Answer 11

Hey Rick, yes the EcoHitch Stealth hitch part #EH57CR that you referenced does fit your 2024 Subaru Crosstrek Wilderness edition. This is a really great option to carry a bike rack. There's no trimming of the bumper required nor does the exhaust…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Comparing Curt And Draw-Tite Trailer Hitches For A 2022 Subaru Impreza

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching