Replacement Grease Seal for CE Smith Trailer CE48810

Question

Question:

I have a CE Smith Multi Sport trailer (model 48810 that has a leaking inner grease seal. What are the OD/ID dimensions for the grease seal and do you have a part number?

asked by: Conner

0

Expert Reply:

Hey Conner, for your CE Smith Kayak Trailer part # CE48810 the correct replacement seal would be the part # 10-9.

expert reply by: Jameson C

0

Patrick

8/9/2024

Jameson, just a quick update. After receiving the parts described above, I discovered the grease seals are too small for the spindle. The correct ID for the seal is 1.5 in.

Reply

Jameson C.

8/11/2024

@Patrick Sorry about that! Sounds like the correct seal would then be the part # 10-9. This has same outer diameter but inner diameter is 1.5 inch

Reply

Answer 1

Hey Todd! The CE Smith Multi Sport Plus Boat and Kayak Trailer item #CE48870 uses item #CE13311 hubs. The correct replacement grease seal is item #34823, which has a inner diameter of 1.249" and an outer diameter of 1.983". Let me know in…

view full answer...

Answer 2

Hey Juan, The CE Smith Bearing Kit #CES94XR does not come with a washer. We have a number of washer options that I'm linking for you to filter through, but if you let me know what you have I'd be more than happy to help you out further!

view full answer...

Answer 3

It's not common for the spindle number to be printed anywhere on the axle. That said, if you're looking for new bearings/races and seals all you need to do is note the capacity or measure. The easiest method would be to crawl under the…

view full answer...

Answer 4

In order to find the correct replacement grease seal for a trailer axle you have a few options. The first and easiest option would be to crawl under the trailer and read the axle capacity off the tag on the center of the beam. The part #RG06-050 for…

view full answer...

Answer 5

Yes, you can change the wheels on the CE Smith Multi Sport Boat and Kayak Trailer #CE48810 from 8" to 12". This would give you a trailer like the CE Smith Multi Sport Plus Boat and Kayak Trailer #CE48870. To complete the conversion you will…

view full answer...

Answer 6

The correct replacement idler hub for the CE Smith Multi Sport Boat and Kayak Trailer part #CE48810 is the CE Smith Trailer Hub Assembly part #CE13210 or if you are just looking for a bearing kit it's the Bearing Kit with Grease Cap part…

view full answer...

Answer 7

The Grease Seals (pair) #RG06-020 and Grease Seal #10-9 are the only grease seals that we currently offer with a 1.5" ID and 1.987 OD.

view full answer...

Answer 8

The speed rating of the CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks #CE48870 is 65 mph due to the tires that are on it. If you needed to go faster than that you can swap the tires out to the part #TT48012C which is the same size but…

view full answer...

Answer 9

The CE Smith trailer #CE48870 that you referenced would use the bearings #L44649. If you ever needed a replacement hub you'd just need the part #CE13210.

view full answer...

Answer 10

I contacted CE Smith and the #CE48870 Multi Sport Plus Boat and Kayak Trailer does use the larger 1-1/16" spindles due to its larger size and capacity. The CE Smith #CE13210 hub is designed for use with the 1" spindle, so it will not be…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Replacement Grease Seal for CE Smith Trailer CE48810

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching