Replacement Mounting Hardware for 2006 Chevy Silverado 1500 Aries Grille Guard

Question

Question:

Hi , I recently acquired a brushguard off of a 2006 silverado with no part number on it. After extensive research I belive its a westin brushguard but I am very unsure . Can I get a second opinion on identifying it? 2003 silverado 1500 .Thank you!

asked by: David G

0

Expert Reply:

Hey David, thank you for the photos and explanation!

That is most definitely an Aries Grille Guard, and if it came off of a 2006 Chevy Silverado 1500 then we're looking at the part # AA4059-2 which will also fit your 2003 model by using the Replacement Hardware Kit # AABRKT-4059.

If their '06 Chevy was a 2500/3500 then the grille guard unfortunately will not be compatible with your vehicle.

expert reply by: Jon G

0

Aries Grille Guard for Chevy Silverado
(click to enlarge)

David G.

4/17/2024

What is the difference for 2500 and 1500? Also I think you are correct about aries4059

Reply

Jon G.

4/17/2024

@DavidG The one for the HD model is part # AA4061-2 which I'm sure just has a wider profile to fit the bigger truck. When I've reached out to our grille guard manufacturers in the past they just say "These are all custom fits" and they leave it at that.

Reply

Answer 1

I can tell you that the brackets for the Westin Sportsman #40-1245 which is a fit for your 2006 Chevrolet Silverado 2500HD are part #40-124PK. This will get the grille guard on your truck for sure. I have no way of knowing if the other brackets you…

view full answer...

Answer 2

So that grille guard does not fit a 2006 Chevy Silverado 2500HD (it is for earlier model year 1500's), and there also isn't replacement mounting hardware that will fit your truck; I did verify this directly with Aries. You can get a grille…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

I sure can Bob and thanks for the information! Since you have a Lippert 3,500 lbs axle you'll be able to use the Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles item #AKHD-545-35-EZ-K, you were looking at. These have a 5 on 4-1/2 lug nut…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

The Road Armor Shock Absorbing Equalizer Kit part #LC696740 are taller than most other standard equalizers so you'll likely need the longer 3-1/8" shackle straps when using them, the Lippert AP Kit part #LC52SV is a go-to for this as it has…

view full answer...

Answer 9

Hello Alex, thanks for reaching out. The Dutton-Lainson #DL22560 and #DL22457 are both 1,000 lb rated jacks with a 2" tube and the 6" wheel. The #DL22560 has 12" of total travel. It extends from 15-5/8" to 27-5/16". The…

view full answer...

Answer 10

The confusion is that the two answer pages have two different hitches they are referring to. The #C15312 measures 2-3/4 inches from the mounting flange down to the hitch opening and the #C15313 measures 5-5/8 inches. I attached a picture that has…

view full answer...

Answer 11

Curt Trailer Hitch Receiver #C15703 hangs pretty low on a 2005 Chevy Silverado 2500. From the bottom of the bumper to the top of the hitch receiver it is approximately 4 inches. I have included a picture showing the gap. A similar hitch, #C15302,…

view full answer...

Answer 12

Hi Jerry, For your 2025 Kia Sorento PHEV you would need the Curt Trailer Hitch Receiver #C37RV for the trailer hitch. The right light kit for your Sorento is going to depend on a few factors. For models with the tow package, like you stated you have,…

view full answer...

Replacement Mounting Hardware for 2006 Chevy Silverado 1500 Aries Grille Guard

Products Referenced in This Question

Continue Researching