Replacement Fenders for Demco Tow It 2 Tow Dolly

Question

Question:

Are the fenders for a Demco tow-it 2 2013 are the same size that fenders for Kar Kaddy SS or X? Are all de Demco dolly fenders the same size?

asked by: Henri R

1

Helpful Expert Reply:

The correct fenders for a Demco Tow It 2 are:

Passenger Replacement Fender # DM66MV

Driver Replacement Fender # DM76MV

expert reply by: Jameson C

1

Answer 1

For the driver side you'd want the part #DM37FR and for the passenger side #DM97FR according to my contact at Demco who verified the dimensions you are in need of.

view full answer...

Answer 2

I was able to find the correct fenders for your Demco Tow-it 2 tow dolly, as the Replacement Fender #DM97FR will not fit your Tow-it 2. Passenger Replacement Fender #DM66MV Driver Replacement Fender #DM76MV

view full answer...

Answer 3

For your Demco Kar Kaddy SS you're going to want the Replacement Fender Assembly for Demco Kar Kaddy 3 Tow Dolly #DM97FR for the passenger side and the Replacement Fender Assembly for Demco Kar Kaddy 3 Tow Dolly #DM37FR for the driver's side.…

view full answer...

Answer 4

To replace your Shurflo 2088-422-175 water pump, I recommend the Flow Max RV Fresh Water Pump - 12 Volt - 3.0 Gallons Per Minute #LC689052. This water pump will directly replaece your Shurflo 2088-422-175 water pump and has a flow rate of 3.3 gallons…

view full answer...

Answer 5

While the Replacement Fender Assembly for Demco Kar Kaddy 3 Tow Dolly #DM97FR and the Replacement Fender Assembly for Demco Kar Kaddy SS Tow Dolly #DR74FR are very similar they are not quite the same and you would not want to use the Replacement…

view full answer...

Answer 6

According to Demco, although it's made for a newer tow dolly, the #DM97FR replacement passenger side fender assembly would be a direct bolt on for your older Demco Tow Dolly. They don't offer a replacement fender in black, but this fender…

view full answer...

Answer 7

The Demco Tow-It 2 Dolly uses the Driver Side Fender #DM76MV and Passenger Side Fender #DM66MV.

view full answer...

Answer 8

Since your Demco Kar Kaddy was built in 2015 the correct passenger side fender is part #DM77FR which fits the passenger side of the Demco Kar Kaddy built between 2012 and 2017.

view full answer...

Answer 9

The matching driver side fender for the Demco Kar Kaddy 3 part #DM97FR would be the part #DM37FR.

view full answer...

Answer 10

The Replacement Fender Assembly for Demco Kar Kaddy 3 Tow Dolly - Passenger Side item #DM97FR you referenced and the Replacement Fender Assembly for Demco Kar Kaddy 3 Tow Dolly - Driver Side item #DM37FR can be modified to fit your 1999 Master Tow…

view full answer...

Answer 11

I looked up pictures of your trailer and the most similar option we carry to the fender it has on it would be the #HP99VR which is the Jeep style of fender.

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Replacement Fenders for Demco Tow It 2 Tow Dolly

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching