Will Bright Way Switch Mode Battery Charger Work With Optima AGM Battery

Question

Question:

Good morning I have a battery and alternator condition tester model number FC60-1205000UT. Is this safe to use in a OPTIMA AGM blue top battery.

asked by: James S

0

Expert Reply:

What we have is the FC60-1205000UX which is the same as the # BRW77FR. This will work with your Optima AGM blue top battery. From what I found, the FC60-1205000UT shares the exact same specs it just has a slightly different design so it should work for your application.

expert reply by: Robin H

0

Answer 1

I've contacted Brightway, who forwarded me a copy of the instructions they include with the #BRW77FR switch mode charger. I've provided a clip showing the instructions for you.

view full answer...

Answer 2

You are correct that the DeeZee Specialty Series Wheel Well Toolbox #DZ94B is intended for installation on the passenger side of the truck bed but if you prefer to mount it at the front of the driver's side of the bed, in front of the wheel well,…

view full answer...

Answer 3

I spoke with my contact at DeeZee, who did not have any information as to whether or not the box would fit in front of the wheel well, rather than in its typical installation behind it. However, the foot or bottom of the box is 17 inches in length.…

view full answer...

Answer 4

Yes, I attached a picture of the owners manual/instructions of the Bright Way Battery Charger #BRW77FR that I got from them.

view full answer...

Answer 5

The #STL22CCRB lamp you referred to is typically mounted in a grommet, like part #A70GB, which in turn is mounted in a bracket like part #337LB1SS. If you were planning on cutting a hole to mount the lamp and grommet, the hole will need to measure…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Since you have a 400ah lithium battery bank the best option is going to be the Redarc In-Vehicle BCDC Battery Charger #331-BCDC1240D. This DC to DC charger works with 12V or 24V vehicle systems with standard or smart alternators and is compatible…

view full answer...

Answer 8

Hi Frank, You absolutely can have both the Bright Way Switch Mode Battery Charger #BRW77FR and Bright Way Solar Battery Charger #BRW54FR connected and charging the battery at the same time. They both read the battery's charge level and adjust the…

view full answer...

Answer 9

Hello Al, thanks for reaching out. The OptiMate Lithium 4s Smart Battery Charger #MA47JR can indeed be used with the Zamp port on your Casita Trailer. You will just want to be sure your zamp is wires correctly for this charger. Zamp likes to wire…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Mike, so I checked with Curt and their hitch part number 13630 which is our part number #C33MJ does fit the 2025 Mazda CX-50 hybrid. Curt says this actually fits all models of the vehicle actually. What are you planning on using the hitch for?

view full answer...

Will Bright Way Switch Mode Battery Charger Work With Optima AGM Battery

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching