Troubleshooting No Power To Furrion Vision S Camera On a 2021 Jayco White Hawk Travel Trailer

Question:

Im connecting a furrion backup cam to my 2021 jayco whitehawk and have no power to the rear connection is there a switch or connection I need to do to get power to the camera?

asked by: John C

Helpful Expert Reply:

The Camera for the Furrion Vision S Wireless RV Backup Camera System # FOS05TASF is powered off the running lights for your 2021 Jayco White Hawk travel trailer. You will need to make sure your tow vehicle is connected and the running light switch is turned on and powering the lights on the trailer. There are 2 instances I am aware of that would still cause the camera for the trailer to come on. First is some newer trucks like the Sierra and Silverado will require a 7-Way Vehicle Power Adapter # FR87PR which changes the PWM power sent to the trailer lights to a constant power to power the camera correctly. The other issue is the wiring for the camera itself was installed incorrectly. The power wires for the camera have to be hooked up with red to positive and black to negative. I have seen these wires reversed from the factory if your travel trailer came with the Furrion factory prep.

expert reply by: Bud M