Lug Nut Torque Chart For Various Size/Material Trailer Wheels and Tires

Question

Question:

What is the torque on a 8 lug 1/2stud with a regular lugnut. Thanks

asked by: Mark A

0

Expert Reply:

I have attached a chart below which will help you identify the correct amount of torque for your 8 lug, 1/2" wheel stud. The torque setting is different with steel or aluminum wheels.

expert reply by: Bud M

0

Wheel Lug Nut Torque Chart
(click to enlarge)

Answer 1

I'm going to be perfectly honest...the risk is pretty minimal BUT due to the construction differences between bias ply and radial tires the sidewalls do end up flexing differently which could in turn end up with unpredictable ride…

view full answer...

Answer 2

The tire capacity difference for single and dual wheel setups is for dually and single wheel axles. It's not the difference between tandem axle and single axle trailers. For example compare these capacities for a tire: Single tire: 3,420 lbs at…

view full answer...

Answer 3

The torque for the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility #8-174-5UC3 is not specified by the manufacturer. For 9/16 inch studs, the typical lug nut torque will be 120-140 ft lbs based on most…

view full answer...

Answer 4

To determine the correct air pressure for the tires on your Jayco trailer take a look at the sidewall. The tires should have the maximum psi listed. Trailer tires should always be inflated to the maximum psi indicated on the tire. This is because…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hello Terry, We can definitely get your 2024 Toyota Rav4 set up with a tow package. The Curt Trailer Hitch Receiver #C13416 is going to be a great fit for the Rav4 and will give you a 2" receiver. I attached a picture of an install that we did…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Lug Nut Torque Chart For Various Size/Material Trailer Wheels and Tires

Product Page this Question was Asked From

Continue Researching