Mounting a Rear Slipper Spring Hanger
Question:
On the slipper spring rear hanger does it matter which side gets welded to the frame? closed or open side against the frame?
asked by: Brian
0
Expert Reply:
When welding a metal part to another piece of metal, it is always best to have as much metal touching between the two parts. With this in mind, the majority of customers will weld the top of the hanger to the frame of the trailer, leaving the side with the open portion facing the ground. This will be the same for the rear slipper spring hanger, part # 115706S.
expert reply by:
Andi
0
Product Page this Question was Asked From
Rear Hanger for 1-3/4" Slipper Spring
- Trailer Suspension Parts
- Hangers
- Camper
- Car Hauler
- Utility Trailer
- Slipper Springs - 1-3/4 Inch
- 9/16 Inch Diameter
- Single Axle
- Tandem Axle
- Triple Axle
- Redline
more information >
Continue Researching
- Shop: Rear Hanger for 1-3/4" Slipper Spring
- Video: An In-Depth Look at the Rear Hanger for 1-3/4" Slipper Spring
- Q&A: Do Trailer Slipper Springs Normally Slip Out of their Rear Hangers
- Search Results: spare tire carrier
- Search Results: spare tire mount
- Video: Let’s Check Out the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles
- Shop: 4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles - 30" Long
- Shop: CE Smith Spare Tire Mount - Lockable - Steel - 4-Lug and 5-Lug Wheels - 8-3/4" Long
- Shop: Karrier ST175/80R13 Radial Trailer Tire w/ 13" White Modular Wheel - 5 on 4-1/2 - Load Range C
- Shop: Loadstar ST175/80D13 Bias Trailer Tire with 13" White Wheel - 5 on 4-1/2 - Load Range D
- Shop: Provider ST175/80R13 Radial Trailer Tire w/ 13" Vesper White Mod Wheel - 5 on 4-1/2 - LRC
- Shop: Karrier ST175/80R13 Radial Trailer Tire with 13" White Wheel - 5 on 4-1/2 - Load Range C
- Search Results: slipper spring hanger
- Video: Checking Out the 3-Leaf Slipper Spring w/ Flat End for 2,900-lb Trailer Axles
- Video: In-Depth Review of the 4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles
- Q&A: U-Bolt Kits Available For Different Size Axles When Adding New Hangers
- Video: Hands-On with the 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles
- Search Results: 26~1/4 inch long trailer leaf springs
- Search Results: 26 1 4 leaf spring
- Search Results: ce33201ga~hub
- Search Results: lug nuts
- Video: What to Know About the CE Smith Rear Hanger Bracket for Trailer Slipper Springs
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Can Trailer Suspension Hangers be Bolted On
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Replacement Wet Bolts For A MORryde CRE3000 Suspension
- Q&A: Are Taller Hangers Available For A 1-3/4" Wide Slipper Spring
- Video: All You Need to Know About the CE Smith Front Hanger Bracket for Trailer Slipper Springs
- Q&A: Boat Trailer Slipper Spring Installation
- Q&A: Will Slipper Spring Hanger # 115706S Work with a 2 or 3 Slipper Spring