Is There a Difference Between 2057 and 1157 Bulb for Trailer Wiring

Question

Question:

This tail light but unit came with a 2057 Bulb. Stamped on the plastic near the bulb it says to replace with an 1157 Bulb. Should I even use the 2057?

asked by: Tommy A

0

Expert Reply:

The 2057 and 1157 bulbs are interchangeable with the difference being the brightness. The 1157 is just slightly brighter than the 2057. For a replacement 1157 we have the # A1157B which would work great and would be your best option.

expert reply by: Jameson C

0

Answer 1

With your 1994 Coleman Fleetwood Four Seasons Yosemite having 10" wheels and looking to weight 1,850 pounds, from what I could find out, you will have either a 2,000 pound axle, or a 2,200 pound axle. This will mean you either have a spindle…

view full answer...

Answer 2

The Voyager monitor part #VOM719WP will work great as a replacement monitor for what you have now with the AOM-7694.

view full answer...

Answer 3

Your statement (I have heard others say that you should never mix marine grease with general purpose grease, but mixing different brands of marine grease wont hurt.) sums up the way I have used grease all of my life. Being raised around all kinds of…

view full answer...

Answer 4

Since your hubs have inner and outer bearing numbers L44649 the correct bearing kit you would need is the part #BK1-150. I attached a trailer bearing install video for you to check out as well. For the standard spindle you would use the TruRyde…

view full answer...

Answer 5

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 6

Based on your manual indicating 7" brakes it is probably a 2,000 lb axle. That should be a 4-bolt brake flange on the axle as well. Try checking your axle tag to see if you can verify this. The capacity may be listed, or it can be found with the…

view full answer...

Answer 7

We do carry the Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel #AM3H430 which is a load range D version of the #AM3H390 with a load range C. Both tires have the 81mph speed rating but the load range D is capable of supporting 1,320lbs…

view full answer...

Answer 8

The current tire size for what I can see in your attached picture is the 205/65-10 which for that we have the part #AM1HP56.

view full answer...

Answer 9

Your 20.5x8.0-10 tire can be swapped to a 205/65-10 without issue at all. I suggest going with the Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 4 on 4 - Load Range D #AM3H410 as this will have a load rating D (1,320 pounds and 70…

view full answer...

Answer 10

The modern day size for a 20.5 x 8 x 10 sized tire is 205/65-10. Based on this information, I recommend The Kenda Loadstar Bias Trailer Tire Item #AM1HP56. It is a top-quality bias tire that is great for all terrains and provides a smooth ride. It…

view full answer...

Answer 11

There should be a sticker on on the brake assembly that will have the serial number and manufacturer however that sticker may have worn off over time. I went ahead and looked up your order and it appears you ordered the Electric Trailer Brake Kit…

view full answer...

Answer 12

The E-Track has slots that have a length of 2.45-inches and a width of .58 inches. See attached diagram. I couldn't find any information on the ANCOR brand so you would need to compare what you have to those dimensions to know if the accessories…

view full answer...

Is There a Difference Between 2057 and 1157 Bulb for Trailer Wiring

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching