Solution for 36 Inch Hitch Extension on 2020 Ram 3500 With Arctic Fox 992 Camper

Question

Question:

I have questions regarding hitch extensions and accessories. I have a 2020 Ram 3500 Dually with 8ft bed. I am carrying a bed mounted Arctic Fox 992 truck camper. I need a hitch extender of 36 inches. I would like to tow everything from a kayak trailer, 4-wheeler trailer or a boat with a gross weight of say 5000-6000 and tongue weight of 500-600. I understand I can purchase the magnum hitch replacing the factory hitch and 36 super truss. This seems like over kill for towing the lighter loads I cant never exceed Towing/payload capacity in this configuration. What other options/manufacturers are available for a 36 hitch extender mounted in factory hitch with side to side tensioner control, and maybe an equalizer hitch added to trailer. Plus 4-way flat and 7 way round trailer wiring extensions. Side note I have Torklift Fast Guns mounted to attach camper to truck. Thanks!

asked by: Tom F

0

Expert Reply:

The only other extension that will meet your 36" requirement is the Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long # RP45018. This extension would have a maximum gross trailer weight of 7,500 lbs/750 lbs of tongue weight at 41" with weight distribution. Also, this does not have lateral-support safety chains like the TorkLift does.

When you use a really long extension like the # TLE1536 there is a lot of additional force. This is why it seems like overkill to use this extension with the TorkLift SuperHitch # TLD1111-30. The longer the extension the greater the reduction in capacity will be.

For what you are doing I would go with the TorkLift. The SuperTruss is going to have more stability and help distribute weight because of the design. I understand not wanting to add a hitch when you already have one, but you also want a nice, safe towing experience. For a 7-way extension you can use the # TLW6036 or # TLW6532. The # TLW6532 has an additional socket that can run to your camper. For a 4-way extension we have the # HM47114. You will also need to replace your rear tie-downs with the # TLR3510.

I know you said your trailer tongue weight is 500-600 lbs, but tongue weight also includes any cargo behind the rear axle when choosing a WDH. I'm not sure what it will be with your Arctic Fox 992 so I recommend measuring with a scale like the # e99044 to find your actual tongue weight.

Both extensions will work with the Equal-i-zer Weight Distribution System. You will need to choose from the following based on your loaded tongue weight:

-Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37100ET (600-1,000 lbs of tongue weight)

-Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37120ET (800-1,200 lbs)

-Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37140ET (1,000-1,400 lbs)

-Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ64FR (1,200-1,600 lbs)

These will also require the # ALL643216 for hitch ball installation.

expert reply by: Robin H

0

Answer 1

We do carry the Replacement Scissor Step Bracket #CR2001 (this is the Brophy part 2001). However, this is for 18" steps. We do not have a bracket that is for the 16" step. If Brophy told you that you needed the #CR2001, we would default to…

view full answer...

Answer 2

Thanks for the pictures! My main concern in recommending a shorter extension, like the 36" TorkLift SuperTruss item #TLE1536, is clearance when making turns. The 36" would clear your camper and allow you to install your tow bar without…

view full answer...

Answer 3

This is a great question that there isn't exactly a great answer for. Hitch extenders not only put the weight further away from the hitch which would increase the leverage on the hitch, but they also add movement to the assembly which will…

view full answer...

Answer 4

I do have a camera system that will tie into the factory in-dash monitor on a 2010 - 2019 Ram 3500 with the Truck Bed Cargo Camera for Factory Monitor part #3460015 but this as I am sure you can see installs on the vehicle and is used predominantly…

view full answer...

Answer 5

When it comes to higher towing capacities and hitch extensions the Torklift extensions are the only way to go like with the part #TLE1536. So to use this with your 2021 Ram 3500 you would need the Torklift hitch part #TLD1111-30 which fits underneath…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

It sounds like you need about a fairly long extender and there unfortunately is not an extender that isn't also a reducer for your 2-1/2 inch hitch receiver. My recommendation is to use the Curt Hitch Extension and Reducer for 2-1/2" Trailer…

view full answer...

Answer 8

I recommend using the Curt Hitch Extension and Reducer #C45048 as it will fit better with the 2-1/2" factory receiver on your 2019 Ford F-250. The Hitch Box Extension and Reducer #RP45292 is designed to be used with the Reese Titan 2-1/2"…

view full answer...

Answer 9

I'm happy to help get you everything you need for your 2016 Jeep Wrangler JK to flat tow it. You have done your homework so my recommendations will be in line. I recommend the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms #RM-521448-4…

view full answer...

Answer 10

Since truck campers stick out past the rear bumper of trucks by quite a bit a hitch extender like the Titan part #RP45018 would be a great choice to allow you to flat tow your Jeep without clearance issues. This can be used as a 48 inch long…

view full answer...

Answer 11

The Reese Titan Hitch Extender part #RP45018 that you referenced can be used to flat tow a vehicle like you are wanting it to so this would work fine as long as you have a 2-1/2 inch hitch installed on your truck.

view full answer...

Answer 12

A good option for a safety chain for use with Titan Hitch Box Extension #RP45018 is the Laclede Chain Safety Chains and Cables, part #2118-348-04. These offer a minimum breaking strength of 5000-lbs and are USA-made.

view full answer...

Solution for 36 Inch Hitch Extension on 2020 Ram 3500 With Arctic Fox 992 Camper

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching