Is There an Option for a 12 Wheel With 5 on 4.75 Bolt Pattern?
Question:
I bought a 5x8 Wingman trailer for an ATV. The tires it came with have a speed rating of 68mph. Most of the driving I will be doing is in 75mph zones and I would like to be able to tow at 70mph. I would like to upgrade my tires to some that are rated for 81mph but I cant seem to find any that fit. Using your instructions to measure bolt pattern, I am confident that these are 5 on 4.75. I have not been able to find 12inch 5 on 4.75 on your site, or anywhere else, let alone any that are rated at 81mph. Do these exist?
asked by: Dennis
Expert Reply:
The 5 on 4 3/4 bolt pattern is starting to get less and less common, so they are getting a little difficult to find. With that being said, this bolt pattern was generally not used on wheels of this size in the trailer world.
If you take a look at the Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 # 845475UC1, it will only fit wheels from 13 inches to 15 inches in diameter. This has to do with how a hub will sit inside a wheel and, unfortunately, 12 inch wheels do not have the needed space to accommodate hubs with the 5 on 4 3/4 bolt patterns.
I can suggest swapping your wheels to a 5 on 4 1/2 bolt pattern, but this will require replacing your hubs as well. I listed a few options to do this below.
The Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles # 84545UC1-EZ will use the more common 5 on 4 1/2 bolt pattern, but you will need to make sure the # L68149 inner bearing and # L44649 outer bearing match what you currently have.
If the bearings match, the Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" White Spoke Wheel - 5 on 4-1/2 - LR D # AM31199DX will mate to the # 84545UC1-EZ very nicely and is rated up to 81 mph..

Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-3/4 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" White Spoke Wheel - 5 on 4-1/2 - LR D
- Trailer Tires and Wheels
- Tire with Wheel
- Radial Tire
- Load Range D
- 145/80-12
- 12 Inch
- M - 81 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" Galvanized Spoke Wheel - 5 on 4-1/2 - LR D
- Trailer Tires and Wheels
- Tire with Wheel
- Radial Tire
- Load Range D
- 145/80-12
- 12 Inch
- M - 81 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Galvanized
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Review of etrailer Replacement Handle Shaft Square Direct Weld Jack - TJD-12000-SHABUS
- Shop: RV Backup Camera System - Rear mount - 7" Screen
- Shop: Americana Modular Wheel w/ +0.5 Offset - 17-1/2" x 6-3/4" Rim - 8 on 6-1/2 - Black
- Q&A: Can Brake Controller Get Installed on 2024 Ford Transit T250
- Shop: Truck Bed Camera
- Shop: Replacement Handle Shaft for etrailer and Ram Square, Direct Weld Jacks - 10,000 lbs
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 13" to 15" - 5 on 4-1/2 - PreGreased
- Shop: Trailer Hitch
- Shop: RV Backup Camera System - Rear mount - 7" Screen
- Shop: Dexter Vault Hybrid Lubrication System for 2,500-lb to 3,500-lb Trailer Buddy Axles
- Search Results: tjd~12000~br
- Shop: Brake Controller
- Search Results: k71~773~02
- Search Results: k71~773~01
- Search Results: tjd~12000~gr
- Search Results: tjd~12000~shabus
- Search Results: progressive dynamics rv power converter
- Q&A: Replacement For A SAE-A-P2-72 Trailer Light
- Q&A: Replacement Brass Bushing and Rod for 12,000 lb Fulton Jack
- Search Results: backup camera
- Shop: Suspension Enhancement
- Q&A: Recommended Lock and Electric Tongue Jack for Bumper Pull Horse Trailer with Living Quarters
- Q&A: Using an Air Horn with Air Lift WirelessAir Compressor for Air Bags
- Q&A: Parts Needed For Brake Controller Installation On a 2021 Ford E-450 Cutaway Chassis For Class C RV
- Shop: Trailer Wiring
- Video: All You Need to Know About the 7-Pole Blade to 5-Pole Flat Connector Wired Trailer Adapter
- Q&A: Replacement Wheel for 2004 Rockwood 1640LTD Pop Up with Higher Weight Capacity