Can Bidet be Installed on Dometic Full Timer Standard Size RV Toilet

Question

Question:

CAN A BIDET ATTACHMENT BE ADDED TO THIS TOILET IF IT WILL FIT ON A STANDARD TOILET?

asked by: Robert W

0

Expert Reply:

Yes bidets can install on RV toilets like the Dometic # DOM27FR. Since this is a standard size toilet a standard bidet would work.

expert reply by: Jameson C

0

Answer 1

You can upgrade the 1750 lb leaf springs to 2500 lb leaf springs. You do want to keep in mind that the ride may be a bit stiffer since you are upgrading your springs to a higher capacity. Like you mention upgrading the springs will not give you a…

view full answer...

Answer 2

The inner width of the U-bolt needs to match the diameter of the axle that you have. The longest kit we have that has a 1/2 inch diameter studs is the part #APUBR-1 which has U-bolts that are 5-1/2 inches long.

view full answer...

Answer 3

We have single step platform steps like the part #PA-100 for something that you'd set on the ground in front of the motorhome door. Or if you were looking for something that attaches to the motorhome we have the Flexco manual pull out step part…

view full answer...

Answer 4

The Fogatti RV Tankless Water Heater #LSB44FR is still a 12v system you'll just need to determine which wire, black or white, is the power and which is the ground wire. Each of these wires is typically labeled from the factory so you never need…

view full answer...

Answer 5

I am not 100 percent sure what size you need, but a small option for a single-pole rocker switch is the Pollak Universal-Design Rocker Switch #PK34308. This switch is less than an inch wide (15/16") and just under 1-3/4" tall…

view full answer...

Answer 6

The Dometic RV toilets like the part #DOM29FR that you referenced use the standard 1/2 inch thread size for the supply line like most toilets do.

view full answer...

Answer 7

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 8

Hey Mark, I looked up the specs of the spring you have now and found that it is a 24-3/4 inch long spring from eye center to eye center and for a 7k axle. So that means that the replacement spring part #EM28AJ that you referenced will work great as a…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey James, you can go with a 4k axle leaf spring like the part #e22YR in place of what you have now while it has a slightly higher weight capacity it's not enough that it would create a harsh ride quality. This is a 26 inch long spring though so…

view full answer...

Answer 11

I can help you determine the right replacement double-eye leaf springs for your Keystone Hideout, though we don't have any way of knowing what specific ones you need. It's pretty easy though, as all you need to do is measure your current leaf…

view full answer...

Answer 12

Definitely looks like the springs are being overloaded and need to be replaced. You can use higher rated leaf springs but, the higher you go the stiffer the ride will be. Since we know the weight class with your axles the next step would be to…

view full answer...

Can Bidet be Installed on Dometic Full Timer Standard Size RV Toilet

Product Page this Question was Asked From

Continue Researching