Circuit Breakers for Use with Progressive Dynamics # PD4060K

Question

Question:

What circuit breakers can I use for the PD4060K? Can I use the breakers from my WFCO WF-8955PEC that I am replacing?

asked by: Marc C

0

Expert Reply:

I checked with Progressive Dynamics and the replacement breakers for the # PD4060K they recommend are:

Thomas & Betts – TB & TBBD series
Square D – HOM & HOMT series
Cutler Hammer/Bryant – BR & BRD series
GE – HACR series

expert reply by: Jameson C

0

Answer 1

The TorkLift PowerArmor Locking Battery Box - Diamond Plate Aluminum, Item #TLA7708R, is 26-3/4 inches long x 8-3/16 inches wide x 13 inches tall. These are the measurements for the outside perimeter of the box and do not include the lid. Another…

view full answer...

Answer 2

Yes, the TorkLift PowerArmor Locking Battery Box #TLA7710R is sturdy enough to mount on an A-frame trailer without using extensive bracing. I attached a picture of someone who did something similar.

view full answer...

Answer 3

Hello Joe. All of the parts you mentioned like power distribution centers, converters and inverters are all available separately. If you are looking for an all-in-one that includes all of these capabilities I am afraid there is no such animal. This…

view full answer...

Answer 4

Yes, you can use a 3000w Inverter with transfer switch like part #34275013 and still use it with your Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger #PD4060K. The inverter is going to require you to have two separate AC bus…

view full answer...

Answer 5

First off, congrats on the Scamp, those are great little fiberglass units that last for years. Generally speaking we suggest that electrical wiring, for safety purposes, be done by licensed electricians or certified RV Techs. But as for the items and…

view full answer...

Answer 6

For a similar Progressive Dynamics panel that can be used to charge Lithium or lead acid batteries you would want the part #PD4060K which has both charging profiles. This is a 60 amp unit instead of the 55 that you have now.

view full answer...

Answer 7

The The Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K has 7 branch circuits rated at 30 amps. Progressive Dynamics recommends the following brands of breakers for the #PD4060K: Thomas & Betts – TB…

view full answer...

Answer 8

I have an answer for you about a controller. While it is possible, we currently do not have any hybrid solar/wind controllers because those parts have been discontinued. With that being said, if you already have a solar/wind controller, you can use…

view full answer...

Answer 9

Your solar system will actually be separated from your Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger part #PD4045KA. Using a system like the Go Power Overlander Solar Charging System with Digital Solar Controller part…

view full answer...

Answer 10

To be completely honest, there really is not much of a need to upgrade to the Converter Section for Progressive Dynamics Inteli-Power 4000 Series 60 Amp Power Center #PD4060CSV. It would also be more than just the converter section as well. You would…

view full answer...

Answer 11

Having the extra amperage of the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K has no down side. You'd at worst just have more power available than you'd need.

view full answer...

Answer 12

The Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K is a confirmed replacement for your model 7355 that also has the box and circuit breaker panel. If you simply want the converter replacement, then the…

view full answer...

Circuit Breakers for Use with Progressive Dynamics # PD4060K

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching