What Is The Difference Between ShockStrap Ratchet Tie-Downs 297-7RSBB-UTV and 297-7RSBB-M?

Question

Question:

What is the difference between a 7-RSBB and a 7-RSBB UTV, other than quantity?

asked by: Roger

0

Expert Reply:

The ShockStrap Ratchet UTV Tie-Downs w Shock Absorbers - 1-1/2" x 7' - 1,000 lbs - Qty 4 # 297-7RSBB-UTV and # 297-7RSBB-M are actually the exact same straps. Both of these kits include four straps, but a single strap can be purchased using # 297-7RSBB.

The only reason there is two different part numbers is to allow them to show up in two different sections of our website.

Since they are the exact same part you will just want to go with which ever is the most cost effective at the time.

I included a video of these straps for you to take a look at.

expert reply by: Samuel C

0

Answer 1

I recommend going with the ShockStrap Ratchet Tie-Down Straps w Shock Absorbers - 2" x 9' - 2,000 lbs - Qty 2 #297-9RSDB you were looking at as they will be slightly overkill with a 2000lb WLL (Working Load Limit) per strap, but there really…

view full answer...

Answer 2

The diameter of the replacement threaded rod part #37207-30525 that you referenced is 1/2 inch in diameter and has a thread pitch of 13 threads per inch.

view full answer...

Answer 3

The Treaded Rod #37207-30525 will allow you to switch the size of your propane tanks from 20lb to 30lb. The Complete Propane Tank Holder Mounting Kit #37230WH is for applications where you are adding dual tanks or replacing everything due to damage.…

view full answer...

Answer 4

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY38FR that you referenced.

view full answer...

Answer 5

The lift kits we carry fit with specific axles; the #K71-725-02 is a tandem axle application and will give a 3-1/8" lift and is compatible with side-mounted #12 Torflex axles with 5,500-7,000-lb capacities. If that is what your axle is, this kit…

view full answer...

Answer 6

The ShockStrap Ratchet UTV Tie-Downs part #297-7RSBB-UTV are what I recommend to secure a Polaris RZR as the 1,000 lb weight capacity per strap will be more than enough for the weight of the RZR. These are an excellent option that have built-in shock…

view full answer...

Answer 7

In regards to the B&W Tow & Stow 3-Ball Mount part #BWTS10048B for 5" or part #BWTS10049B for 7", the distance from the top of the shank to the bottom of the upright while the hitch balls are stowed away is 8.5" for the 5"…

view full answer...

Answer 8

I have no idea what the exact coupler height of your trailer would be, but typically the range is in between 16-1/2-19 inches in height. The #989900 ball mount kit you'd looked at would have you covered for a 4 inch or a 2 inch drop which would…

view full answer...

Answer 9

I did some searching online and found that the tires for your 2018 Aluma 548 trailer are ST175/80R13 Radial with a Load Range of C (1,360 lbs at 50 psi). They are mounted on Aluminum wheels that have a 5 on 4-1/2 inch bolt pattern. I recommend going…

view full answer...

Answer 10

You can potentially switch from ST205/75R14 tires and wheels to ST205/75R15 tires and wheels but you first need to make sure that there is enough clearance all around the existing tires for the larger size. The 14s that you have now are abut 26.3…

view full answer...

Answer 11

I may have a solution for you to help control your UTV in a better manner than your current ratchet straps are doing when it's loaded on the trailer, but I'm not aware of any shock system available that will mount to torsion axles. We've…

view full answer...

What Is The Difference Between ShockStrap Ratchet Tie-Downs 297-7RSBB-UTV and 297-7RSBB-M?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching