Fifth Wheel Hitch Bed Rail Placement on 2003 Ford F250 Extended Cab

Question:

What are the measurements for the first rail from the back of the bad on ford f250 2003 w. Extended cab

asked by: Chris Y

Expert Reply:

The correct placement will depend on which install kit you are using. I would recommend using a custom kit like the one offered by Reese, part # RP50082-58.

The installation instructions for the # RP50082-58 (see link) state that the rear of the back rail is 32-1/4 inches forward of the rear edge of the bed (not the tailgate). This will place the centerline of the hitch approximately 2-15/16 inches forward of the rear axle centerline. These dimensions can vary if you use a different kit.

expert reply by: Mike L