How Does Fuse Install in Red Fuse Holder of Curt Trailer Wiring Harness # C56217

Question

Question:

I wasnt clear how to install the 10 amp fuse in the red inline receptacle. Can you provide an image?

asked by: Mark C

0

Expert Reply:

Pull the cap off of the red fuse holder of what comes with the Curt trailer wiring harness part # C56217 and push the metal feet of the fuse into the slots that you can see in the holder.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The T-connector trailer wiring harness for the 2017 Toyota Highlander consists of two different parts, the connector itself which is part #56042 you purchased as well as a converter box that completes the tow package. The #56042 is actually intended…

view full answer...

Answer 2

The 10 pin connector you are looking for to install the Curt trailer wiring harness part #C56217 on your 2018 Lexus RX 350L is under the dash and not the rear cargo area you sent in a picture of which is maybe where the confusion stems from. I…

view full answer...

Answer 3

Curt T-Connector Vehicle Wiring Harness #C56291 includes both a red 10-amp mini blade fuse for the red fuse holder on the harness and a pink 30-amp box fuse for the fuse box in the engine compartment. Both fuses are shown in the linked photo.…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hey Tim, The ZCI Circuit Protected Vehicle Wiring Harness #119250KIT is compatible with LED lights and has been used as a go to for years for people who have LED trailer lights. The light function is supposed send a tiny bit of voltage from the…

view full answer...

Answer 12

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

How Does Fuse Install in Red Fuse Holder of Curt Trailer Wiring Harness # C56217

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching