Replacement Parts Available for Lippert Smart Jack

Question

Question:

Can you help find it

asked by: David N

0

Expert Reply:

If you're looking for the hard plastic piece that covers the manual override on your Lippert Smart Jack Electric Trailer Jack # LC643589, you can use part # LC733925.

Aside from that and the drop leg # LC405217, Lippert does not offer any other replacement parts for this jack.

expert reply by: Carla M

0

click to enlarge

Paula B.

6/3/2024

How can we get the plastic over the led buttons for up and down replaced.replaced

Reply

Jameson C.

6/3/2024

@PaulaB I wish we could help but that's not a part we are able to get.

Reply

Don C.

3/26/2025

@PaulaB This is really unacceptable. So I've got a $400 jack that's rendered useless because your design doesn't include a film replacement for the jack? Always have protected under a roof but this new storage exposed the film this winter and I didn't realize the damage until I pushed on the buttons. What a real disappointment. I can tell you, somehow this has to be made right. I will certainly be outspoken on all of my rv sites about LCI Smart Jacks and their poor quality. This is a terrible design and poor business model. Don Cleghorn

Reply

Jameson C.

3/26/2025

@DonC I don't disagree that it's super frustrating and ideally there would be a replacement. We only carry the brand Lippert though and we aren't the manufacturer. Honest feedback on their products is definitely encouraged around here.

Reply

See All (4) Replies to Paula B. ∨

Answer 1

The only way to get a new control panel would be to replace your entire Smart Jack with part #LC643589. I reached out to my contact at Lippert who confirmed that the only replacement parts for the jack includes hardware like the pin or the footplate.…

view full answer...

Answer 2

I have a complete replacement jack option for you, but the buttons on your Lippert Smart Jack #LC643589 are not replaceable so the only option is a complete replacement. If your jack is still within the 1-year warranty period then I recommend…

view full answer...

Answer 3

The buttons, face and controls on the Lippert Smart Jack Electric Trailer Jack w/ Footplate - A-Frame - 22-1/2" Lift - 3.5K - Black #LC643589 are not a replaceable part. You will have to use your warranty if you are within its time frame or…

view full answer...

Answer 4

Hey John, The Lippert Smart Jack Electric Trailer Jack w/ Footplate #LC643589 is only going to have a power wire to connect to your battery. If your trailer has the Ground Control TT leveling system then you would want the Replacement Tongue Jack for…

view full answer...

Answer 5

Hey Dennis, Does your Imagine have the Lippert Ground Control TT leveling system #LC672136 on it? If so, you'll need the #LC421366 to replace the tongue jack. If you have a different model then just let me know what it is and I can find a…

view full answer...

Answer 6

The membrane of the control panel for your Lippert Smart Jack Electric Trailer Jack w/ Footplate #LC643589 is not replaceable but you can use a cover like the Ultra-Fab Protective Cover for Electric A-Frame Jacks #UF38-944020 to prevent further…

view full answer...

Answer 7

Thanks for reaching out, Randy. We do offer the Lippert TT leveling system, however I was not able to find any references for the part number 811995 you provided. If you are looking to replace the tongue jack portion of your Lippert TT system, the…

view full answer...

Answer 8

Yes, the motor for the Lippert Components PSX2 Electric RV Stabilizer can be replaced without obtaining an entire new system. The Replacement Motor and Gear Box Assembly for Lippert Components PSX2 Electric RV Stabilizers part #LC759091 is what you…

view full answer...

Answer 9

Hey Tom, so the Lippert a-frame jack part #LC285318 is basically the same jack for the Lippert Ground Control TT part #LC672136 but it is not a replacement for it as it does not have the same circuit board and connectors to work with the rest of the…

view full answer...

Answer 10

It sounds like the 6K might be referring to 6,000 pounds although I cannot be 100 percent sure on that. I could tell you for sure if you could tell me the inner and outer bearing numbers stamped in to the bearings. A 7K axle will use inner bearing…

view full answer...

Answer 11

Yes, the hose outside diameter is 3 inches. The RhinoFLEX RV Sewer Hose w Swivel Fittings, 4-in-1 Adapter, and Storage Caps - 15' Long #CAM39761 with its attachments fits 3 inch slip and also 3 inch , 3-1/2 inch, and 4 inch threaded pipes.

view full answer...

Answer 12

Yes, I would recommend using a weight distribution hitch with sway control. I am a big fan of Equalizer for their reliability, ease of use, and affordability. It looks like your 2022 E2W Alta 2810KIK TT tops out at 9,597 lbs when fully loaded. Weight…

view full answer...

Replacement Parts Available for Lippert Smart Jack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching