RV Tire Cover Recommendation for Tire Size 255/80R22.5

Question

Question:

I need some tire covers for my motorhome tires while it is parked to protect from the sun. The numbers on the tires say 255/80 R 22.5 XRV. Can you tell me which ones I need to purchase?

asked by: Kari M

0

Expert Reply:

Your tire size of 255/80R22.5 has an overall diameter of 38.56 inches so for a tire cover you'd just want the Adco Tyre covers part # 290-3960 for a set of high quality RV tire covers that will protect them from the sun and elements.

expert reply by: Jameson C

0

Answer 1

Your 255/80R-22.5 tires measure 38.6 inches in diameter and are 10" wide. The SnapRing TireSavers Tire Covers #ST7004WH is designed to fit tires between 36" and 39" in diameter, and going to the next size up may not make them tight…

view full answer...

Answer 2

We do have covers which will work for your motorhome's 275/80R-22.5 tires. And for that I recommend the SnapRing TireSavers Tire Covers #ST7005WH which fit tires that are 40" to 42" in diameter and designed for larger tires that you see…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Tony, The etrailer Hard Tonneau Cover #e55DR does not come with a built in lock, but if you lock the tailgate of your truck then no would would be able to open the cover without damaging it or the tailgate.

view full answer...

Answer 6

Hey Doug, That's a good question because fit is really important so the cover stays snug on your trailer, and there is a specific way to measure for the etrailer covers. It's pretty simple, and what you want to do is measure the body of the…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

I have a solution for you, but a ladder rack may not be the answer. While we have the DeeZee Invis-A-Rack Folding Ladder Rack #DZ951601 for 6 foot beds or #DZ951551 for 5 foot beds, we do not have a tonneau cover that will work with this ladder rack.…

view full answer...

Answer 9

Hey James, you can go with a 4k axle leaf spring like the part #e22YR in place of what you have now while it has a slightly higher weight capacity it's not enough that it would create a harsh ride quality. This is a 26 inch long spring though so…

view full answer...

Answer 10

Hey Ron! It sounds like you need the Replacement Storage Pin for Demco and etrailer Tow Bars item #DM23VR. This works with all of the etrailer XHD Non-Binding Tow Bars like item #e94ZR. I attached a picture below where I circled the pin which item…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Hey John! Do you know what your 2025 NoBo 19.2 is prepped for? If it is Voyager you can use the Voyager WiSight 2.0 Wireless Backup Camera System w/ Night Vision for Prewired RVs #ASA37YR. If it is Furrion you need the new Furrion Vision S+ Wireless…

view full answer...

RV Tire Cover Recommendation for Tire Size 255/80R22.5

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching