Brake Kit and Hub/Drum Assembly Needed for 1994 Four Winns Single Axle Boat Trailer
Question:
I have a 1994 Four Winns boat and single axle trailer. The hubs and brakes appear original, so Im planning to replace. I havent pulled off the wheel to determine the axle diameter, but I found an old specs sheet online on the manufacturers website that listed the Gross Axle Weight Rating as 4740 lbs. It has 6 on 5.5 lugs. Is it safe to assume that the replacement hubs/brakes would be rated for 5200 lbs? If you would be so kind to recommend compatible parts if possible, it would be much appreciated!
asked by: Joe
Helpful Expert Reply:
Since the spec sheet said 4,740 lbs per axle and you have 6 on 5-1/2" lug patterns I think it's safe to assume that brakes and hub/drums rated for a 5,200 lb axle would fit, but I would still try to double check on your end just to be sure. There should be an axle tag in the middle of your axle that says the exact weight rating.
For a 5,200 lb axle you'll use the following:
Electric Brakes - # AKEBRK-7-D
Hydraulic Brakes - # AKFBBRK-7-D
Hub and Drum Assembly - # AKHD-655-6-EZ-K (comes as qty 1)
Attached are some installation videos that you can check out.
Products Referenced in This Question
Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Hydraulic Drum Brakes
- Marine Grade
- Free Backing
- Manual Adjust
- Single Servo
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- Pre-Greased
- 25580 / 15123
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
etrailer Rust-Resistant Electric Trailer Brakes - Dacromet - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: How to Bleed Your Trailer Surge Brakes
- Search Results: dm72vr
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 12" - Left/Right Hand - 5.2K to 7K
- Q&A: Replacement Wheel Studs For 6,000LB Axle With 1/2"-20 Threaded Studs 2-3/4" Long
- Shop: RV Bearing
- Shop: Kodiak Hydraulic Brake Line Kit - Single Axle - 18'
- Shop: Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 2-3/4" - Qty 4
- Shop: Wheel Stud - Drive In 1/2" x 2-1/2" (Qty. 1)
- Shop: Dexter Wheel Bolt - 1/2" Diameter - 2-11/16" Long - Qty 1
- Search Results: 92655
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Video: What to Know About the Demco Hydraulic Brake Actuator-DM72VR
- Search Results: 1 2 x 20 wheel studs
- Shop: etrailer Rust-Resistant Electric Trailer Brakes - Dacromet - 12" - Left/Right Hand - 5.2K to 7K
- Q&A: Flexible Brake Line for an Extending Tongue Boat Trailer
- Video: Complete Breakdown of the Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 2-3/4"
- Q&A: How to Determine Which Replacement Wheel Studs Are Needed
- Q&A: Recommended Bearing Seal Kit For 2000 Four Winns Trailer
- Article: Trailer Wiring Diagrams
- Video: Fulton Single Axle Trailer Fender with Top and Side Steps Feature Review
- Search Results: four winns
- Q&A: Replacement Brake Assembly Kit for AL-KO 6K Axles with 5 Bolt Pattern
- Q&A: Dimensions for Buyers Product Wiring Junction Box # 3375601101
- Search Results: fuse
- Search Results: boat jack
- Search Results: lock