Lift Kit Compatible with Dexter #10 Axles on EZ Hauler Trailer with Tandem Axles

Question

Question:

Hello, I have a tandem EZ Hauler trailer with Dexter #10 axles. I need a lift kit for the trailer but I believe my axels are top mount, not side mount. They are bolted to the trailer frame by bolts that come straight through the frame from above. Can you recommend a lift kit that will work with my application please.

asked by: Timothy S

0

Expert Reply:

For your Dexter #10 torsion axle, the Torflex Lift Kit - Tandem Axle - 2-5/8" Lift # K71-707-02 is the correct fit. We don't have anything compatible with top-mounted torsion axles so you would first need to weld on the Dexter Axle Torflex #10 Axle Side-Mount Frame Installation Hardware Kit # DX54FR for each axle. With this mount welded to your frame you would them be able to use the lift kit.

expert reply by: Jason S

0

Answer 1

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…

view full answer...

Answer 2

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 3

The lift kits we carry fit with specific axles; the #K71-725-02 is a tandem axle application and will give a 3-1/8" lift and is compatible with side-mounted #12 Torflex axles with 5,500-7,000-lb capacities. If that is what your axle is, this kit…

view full answer...

Answer 4

The Dexter Axle Torflex axles are basically broken up into the following categories: #9 - 1,000 - 2,200 lb #10 - 2,300 - 4,000 lb #11 - 4,100 - 6,000 lb #12 - 5,500 - 7,200 lb Based off of your 2004 R-Vision Trail-Lite Model 8306S being a tandem axle…

view full answer...

Answer 5

Hey Seth, thanks for reaching out! I believe you have the Torflex #11 axles which means you would need the Torflex Lift Kit #K71-724-02 for a 2-7/8" lift. I recommend checking the tag on your axle to make sure this is accurate. If you find…

view full answer...

Answer 6

Your Airstream uses Dexter Torflex #10 axles. As long as the axle mounting brackets aren't the 3 inch tall high profile brackets, the Dexter #K71-707-02 lift kit for tandem axle trailers would work perfectly for you. I've linked to the…

view full answer...

Answer 7

Based on the available information for your 2022 Airstream Flying Cloud 30FB it looks like you have Dexter #11 Torflex axles. Assuming that is accurate, you need the Torflex Lift Kit - Tandem Axle - 2-7/8" Lift #K71-724-02. I recommend verifying…

view full answer...

Answer 8

Thanks so much for the photo that was super helpful, and what the axle tag shows is that you have a #11 Dexter Torflex axle. We do have the correct lift kit for you, which is the following part: - Torflex Lift Kit - Tandem Axle #K71-724-02 This kit…

view full answer...

Lift Kit Compatible with Dexter #10 Axles on EZ Hauler Trailer with Tandem Axles

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching