Correct Replacement Hitch Bolt for Thule Camber Bike Rack

Question

Question:

what size hitch bolt will fit my Thule Camber 4 bike rack? Thanks

asked by: RB

0

Expert Reply:

The Thule Camber 4 Bike Rack like part # TH9056 uses a hitch bolt, the Replacemnt Hitch Bolt part # 853-5917 or the Replacement Locking Hitch Bolt part # THSTL2 which are both 1/2" diameter.

expert reply by: Conner L

0

Answer 1

Sounds like you are looking for a replacement bolt for either the Thule Camber 4-Bike Rack item #TH9056 or the Thule Camber 2-Bike Rack item #TH9058. The correct replacement 12 x 40 mm hex bolt for the Thule Camber bike rack, is the one you were…

view full answer...

Answer 2

I checked with Thule for you to verify the correct replacement 12 x 40 mm hex bolt for the Thule Camber bike rack, which is the one you mentioned: - Replacement 12 x 40 mm Hitch Bolt #908-1240-54 This is the right replacement bolt for both the Thule…

view full answer...

Answer 3

The Thule Camber 4 Bike Rack #TH9056 that you referenced comes with the only hitch pin that should be used with it. It can't be used with standard hitch pins like what you mentioned. This comes with a threaded hitch pin that you thread through…

view full answer...

Answer 4

I spoke to my contact at Thule and she informed me that the correct hitch bolt you would need for your Thule 959 Trailway would be the part #908-1240-54. The #F-315 does not work with the Thule racks.

view full answer...

Answer 5

The Thule Trailway appears to be a re-branded Parkway that Thule sells to certain retailers. The Parkway does use the bolt #853-5917 but there is not a nut that goes on the other side. The nut is welded inside of the bike rack shank which is why the…

view full answer...

Answer 6

The bolts that the Thule Combi Hitch Cargo Carrier part #TH665C are 12 x 40 mm with the part #908-1240-54.

view full answer...

Answer 7

For the replacement bolts to secure the 2 bike extension part #TH9046 to your #TH9044 you would need the part #908-1240-54. I confirmed this with Thule. This would be the same if you need to replace the same bolt for the combo #TH9044-TH9046.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

Hello Lou, thanks for reaching out. The hitch pin you are looking for is the etrailer D-Shape Anti-Rattle Locking Hitch Pin for Benton Hitch Accessories #e43JR. This will work with the Benton #B54VR bike rack you mentioned, as well as the #B54FR,…

view full answer...

Correct Replacement Hitch Bolt for Thule Camber Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching