Can Pressure Switch be Replaced on Flow Max Fresh Water Pump

Question

Question:

flow max pump. can the pressure switch be replaced

asked by: Bob C

0

Expert Reply:

The only replacement parts of the Flow Max RV Fresh Water Pump # LC689052 are the Replacement Strainer and Swivel Connectors # LC689059. The pressure switch itself is not something that can be replaced (on any fresh water pump that I'm aware of). So if you are having an issue with the pressure switch you will need to replace the entire unit.

expert reply by: Kyle S

0

Answer 1

For your 12V wiring to your 7-way, we have people running many different things off that 12V wire. 12 gauge or even better 10 gauge ensures that the power is transferred timely and accurately. We have a kit for brake controllers and 12V wiring for…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 5

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 6

We can definitely help install a brake controller and 7-way on your 2024 Toyota Grand Highlander but first the brake controller I recommend is the Redarc Tow Pro Liberty part #RED24FR with the install harness part #RED69FR. As this controller puts…

view full answer...

Answer 7

Hey Stanley! To clear things up, you need to connect the white plug. However, this is definitely confusing. I just looked at the #FR27TD instructions and I see where it says to tuck the white connection off to the side, unused. Directly below that it…

view full answer...

Answer 8

Hey Mark, the oscillating vent of the Furrion Chill Cube #FR27TD points to the front. Is there anyway you could use it pointing forward?

view full answer...

Answer 9

Thanks for reaching out, David. For your 2021 Toyota Highlander Platinum I recommend the etrailer Class 3 Hitch #e75ZR. This hitch will fit all models of the 2021 Highlander including the Platinum model. We also have the Curt #C45CR hitch for the…

view full answer...

Answer 10

It sounds like you may already have a 4 way connector on your vehicle, which is half of the battle. In order to operate the Curt Echo Mobile Wireless Brake Controller #C51180 you will need an almost fully functional 7 way connector; using something…

view full answer...

Answer 11

Hello John, No, the Optronics Thinline LED Trailer Fender Light for Trailers Over 80" Wide - 10 Diodes - Amber/Red #MCL65ARB will not have the etrailer logo on it like you see in the picture. Our photo team only puts the sticker on there when…

view full answer...

Answer 12

The best option for wireless brake controllers is the Curt Echo #C51180. It is the easiest to plug in and go when you need to use a brake controller with your trailer. Once you have a 7-way connector installed in your vehicle, all you need is to…

view full answer...

Can Pressure Switch be Replaced on Flow Max Fresh Water Pump

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching